VMware VCP-510 Online Practice Questions and Exam Preparation

VMware VCP-510 Online Questions & Answers

• Question 381:

  A group of virtual machines has been deployed using thin disks because of limited storage space availability.

  The storage team has expressed concern about extensive use of this type of provisioning. At which level can the administrator set an alarm to notify the storage team?

  A. Datastore
  B. Virtual Machine
  C. Host
  D. Resource Pool
  A. Datastore

• Question 382:

  A vSphere 5 environment has an ESXi 5 x host configured to boot from a Software iSCSI adapter. What is the expected outcome if the administrator attempts to disable the iSCSI Software adapter?

  A. The adapter will be disabled, but is re-enabled the next time the host boots up.
  B. The adapter will be disabled and the host will not boot the next time the host boots up
  C. The adapter will not be disabled and the vSphere Client will return an error message
  D. The adapter will be enabled, but the host will boot into troubleshooting mode the next time the host boots
  A. The adapter will be disabled, but is re-enabled the next time the host boots up.

• Question 383:

  What two things are controlled by the DRS automation level? (Choose two.)

  A. VM isolation response
  B. VM restart priority
  C. VM migration
  D. Initial placement of VMs
  C. VM migration
  D. Initial placement of VMs

• Question 384:

  An ESXi host is configured to access an iSCSI target using CHAP authentication. What happens to the access if CHAP is disabled on the ESXi host?

  A. Access is unaffected until the CHAP is disabled at the iSCSI target
  B. Access is immediately removed
  C. Access is unaffected until either the ESXi host or the iSCSI Array are restarted
  D. Access is removed on the next rescan
  C. Access is unaffected until either the ESXi host or the iSCSI Array are restarted

• Question 385:

  Which is the most secure method of connecting to an iSCSI storage array using an independent hardware iSCSI adapter?

  A. One-way CHAP
  B. Mutual CHAP
  C. Per-target CHAP
  D. Per-subnet CHAP
  A. One-way CHAP

• Question 386:

  When would an administrator configure the Explicit Failover option for a portgroup created on a virtual switch with multiple uplinks?

  A. To manually configure load balancing for the portgroup
  B. To share uplinks between vSwitches
  C. When configuring iSCSI Software Initiator multipathing
  D. If the physical switch does not support etherchannel or 802.3ad
  C. When configuring iSCSI Software Initiator multipathing

• Question 387:

  When using a hardware iSCSI initiator with an ESXi host, which two tasks are performed by VMKernel? (Choose two)

  A. Encapsulation of iSCSI PDUs TCP/IP packets
  B. Mapping requests for blocks on the virtual disk to blocks on the appropriate physical device
  C. Issuing iSCSI commands to the virtual disk
  D. Encapsulation of I/O requests into iSCSI Protocol Data Units (PDUs)
  B. Mapping requests for blocks on the virtual disk to blocks on the appropriate physical device
  C. Issuing iSCSI commands to the virtual disk

• Question 388:

  What two statements regarding the VSWP file are true? (Choose two.)

  A. The VSWP file is equal to the memory allocation.
  B. The VSWP file size is equal to the memory reservation.
  C. The VSWP file size is equal to the difference between the memory assigned and reservation.
  D. No VSWP file is created if reserved memory to the same value as allocated memory.
  C. The VSWP file size is equal to the difference between the memory assigned and reservation.
  D. No VSWP file is created if reserved memory to the same value as allocated memory.

• Question 389:

  An administrator is enabling Enhanced vMotion Compatibility in a DRS cluster. The administrator wants the greatest degree of flexibility when adding new hosts in the cluster. Which setting satisfies this requirement?

  A. Any baseline compatible with the existing ESXi hosts in the cluster
  B. The highest baseline that is compatible with the ESXi hosts in the cluster
  C. The lowest baseline that is compatible with all ESXi hosts in the cluster
  D. The highest baseline that is compatible with vSphere 4.x and 5.x
  C. The lowest baseline that is compatible with all ESXi hosts in the cluster

• Question 390:

  A vSphere Standard Switch has been configured for IP-based load balancing using two uplinks. A new uplink is added to the vSwitch. What is the status of the uplink by default?

  A. The uplink is placed in standby mode until it is added to the active NIC team.
  B. The uplink is marked as active but does not participate in the active NIC team until assigned to a port group.
  C. The uplink is marked as active, but cannot be used by the active NIC team until it is added to the existing 802.3ad group on the physical switch.
  D. The uplink is marked as unused until it is added to the active NIC team.
  C. The uplink is marked as active, but cannot be used by the active NIC team until it is added to the existing 802.3ad group on the physical switch.