VMware VCP-510 Online Practice Questions and Exam Preparation

VMware VCP-510 Online Questions & Answers

• Question 251:

  Which option could be used for vSphere HA heartbeats?

  A. An iSCSI LUN used for booting the master ESXi host.
  B. An iSCSI LUN backing an RDM connected over 10GB Ethernet
  C. An NFS datastore shared with the all hosts, sync, no_root_squash and read only options
  D. A Fibre Channel LUN on an 8GB active/active array backing a VMFS5 datastore
  D. A Fibre Channel LUN on an 8GB active/active array backing a VMFS5 datastore

• Question 252:

  Assuming VLANs are not configured, which of the following is true about traffic from a virtual machine connected to a port group on a vNetwork Standard Switch with no uplinks?

  A. Virtual machines in any port group on the virtual switch can receive the traffic.
  B. The virtual switch will drop the packets if no uplink is present.
  C. Virtual machines on any virtual switch on the same ESX Server can receive the traffic.
  D. Only virtual machines in the same port group on the virtual switch can receive the traffic.
  A. Virtual machines in any port group on the virtual switch can receive the traffic.

• Question 253:

  What options must be configured in the vCenter Server settings before email alerts can be sent? (Choose two.)

  A. Sender email address
  B. SNMP address information
  C. SMTP server information
  D. Email authentication information
  A. Sender email address
  C. SMTP server information

• Question 254:

  A vSphere 5 implementation consists of a fully automated DRS cluster with two ESXi 5.x hosts with the following vSphere Standard Switch configuration.

  1.

  Switch A . three vmnics, one port group named sFTP-PG

  2.

  Switch B . two vmnic, one port group named Web-PG

  3.

  All vmnics are trunked to the same physical switch.

  DRS has been configured with an anti-affinity rule for all virtual machines in the Web-PG so that no more than half of the virtual machines run on any given host. The virtual machines on WebPG are experiencing significant network latency. The network team has determined that a performance bottleneck is occurring at the ESXi host level. Which solution will require the least amount of administrative work and the least amount of service interruption?

  A. Migrate Web-PG to Switch A and sFTP-PG to Switch B on each host
  B. Move a vmnic from Switch A to Switch B on each host
  C. Convert the three Switch Bs to a single vSphere Distributed Switch
  D. Use vMotion to redistribute some of the VMs in Web-PG to a different ESXi host
  B. Move a vmnic from Switch A to Switch B on each host

• Question 255:

  In vSphere, a bound physical NIC can be configured to transmit and receive Jumbo Frames. What is the Maximum Transmission Unit (MTU) for Jumbo Frames in vSphere?

  A. 9000
  B. 9500
  C. 5500
  D. 5000
  A. 9000

• Question 256:

  An administrator finds that the Hardware Status tab is unavailable when an ESXi host is selected in vCenter Server. Which two steps could be taken to investigate the issue? (Choose two.)

  A. Check the status of the CIM Data Feed in vCenter Service Status
  B. Check the status of the vCenter Hardware Service in the Windows Services applet
  C. Check the status of the vCenter Hardware Service in the Plug-in Manager
  D. Check the status of the CIM Data Feed on the ESXi host
  A. Check the status of the CIM Data Feed in vCenter Service Status
  C. Check the status of the vCenter Hardware Service in the Plug-in Manager

• Question 257:

  A host failure occurs in vSphere HA cluster, but virtual machines from the failed host are not restarted on the surviving nodes in the cluster. Which two conditions explain this behavior? (Choose two)

  A. HA has been configured to use a dedicated failure host, and the failed host is designated failover host.
  B. An anti-affinity rule configured and restarting the VMs would place them on the same host.
  C. The virtual machines on the failed host are HA disabled.
  D. Host Monitoring is disabled
  C. The virtual machines on the failed host are HA disabled.
  D. Host Monitoring is disabled

• Question 258:

  A vSphere 5.x implementation contains two ESXi hosts, ESXi01and ESXi02. There is a virtual machine "VM21" connected to the Production port group on ESXi01.

  ESXi01 has the following switch configuration. vSwitch0, single uplink to 10.1.20.0/24 Production port group VMkernel port for vMotion VMKernel port for management vSwitch1, single uplink to 10.1.40.0/24 Engineering port group VMKernel port for NFS storage

  ESXi02 has the following switch configuration. vSwitch0, single uplink to 10.1.20.0/24 Engineering port group VMkernel port for vMotion VMKernel port for management vSwitch1, single uplink to 10.1.40.0/24 Production port group VMKernel port for NFS storage

  Which two statements are true about this configuration? (Choose two.)

  A. vMotion is not available between the two hosts
  B. If VM21 is migrated to ESXi02 it will not be available on the network
  C. The virtual machine can be vMotion migrated to the target host.
  D. Broadcasts from the Production port group will not reach the Engineering port group.
  B. If VM21 is migrated to ESXi02 it will not be available on the network
  D. Broadcasts from the Production port group will not reach the Engineering port group.

• Question 259:

  Which three tasks can be selected from the home page of an ESXi 5.x host? (Choose three.)

  A. Browse objects managed by the host
  B. Browse NFS mounts for this host
  C. Download VMware vCenter or the vSphere client from vmware.com
  D. Shutdown or restart the host
  E. Download the PowerCLI installer
  A. Browse objects managed by the host
  B. Browse NFS mounts for this host
  C. Download VMware vCenter or the vSphere client from vmware.com

• Question 260:

  An administrator wants to restrict the ability of selected administrators to install plug-ins in their vSphere Client applications. Which action should the administrator perform?

  A. Modify permissions for the administrators and add the Disable Methods privilege.
  B. Modify permissions for the administrators and add the Validate Session privilege.
  C. Modify permissions for the administrators and remove the CIM Interaction privilege.
  D. Modify permissions for the administrators and remove the Register Extension privilege.
  D. Modify permissions for the administrators and remove the Register Extension privilege.