CompTIA SK0-003 Online Practice Questions and Exam Preparation

CompTIA SK0-003 Online Questions & Answers

• Question 391:

  Which of the following is an advantage of using a KVM with multiple servers?

  A. Eliminates the need for backup tapes
  B. Increases redundancy
  C. Saves physical space in the racks
  D. Offers additional runtime for the UPS
  C. Saves physical space in the racks

• Question 392:

  When troubleshooting a problem on a server, which of the following is the industry best practice?

  A. Reseat all components
  B. Replace the memory and CPU
  C. Test each component one at a time
  D. Reinstall TCP/IP
  C. Test each component one at a time

• Question 393:

  A tape library with LTO2 drives can hold 30 tapes. Which of the following is the approximate maximum native backup storage of the tape library?

  A. 6TB
  B. 6MB
  C. 6PB
  D. 6GB
  A. 6TB

• Question 394:

  The failure of which of the following components can cause a server to display a POST error message?

  A. Parallel HASP key
  B. DVD driver
  C. Memory
  D. Chassis LED
  C. Memory

• Question 395:

  The server administrator has just brought a new Windows server online. Permissions are set, but the server administrator cannot connect remotely. Which of the following is MOST likely the problem?

  A. WMI was not enabled.
  B. Server service was not enabled.
  C. RDP was not enabled.
  D. Workstation service was not enabled.
  C. RDP was not enabled.

• Question 396:

  When planning for redundant power sources in a server deployment, which of the following should be purchased? (Select TWO).

  A. RAID controllers
  B. Multiple UPSs
  C. Redundant cooling
  D. Dual NICs
  E. Redundant power supplies
  B. Multiple UPSs
  E. Redundant power supplies

• Question 397:

  A disk drive failed in a RAID 5 array. After replacing the disk drive, users are still reporting that access to the server is very slow. Which of the following BEST explains the problem?

  A. The array is rebuilding.
  B. The array must be reconfigured.
  C. The array is corrupt.
  D. The disk drive is not compatible.
  A. The array is rebuilding.

• Question 398:

  A Windows server has rebooted by itself several times. There are several functioning non- Windows servers in the same rack that are connected to the same uninterruptible power supply (UPS). Which of the following is the MOST likely cause of the reboots?

  A. The UPS is malfunctioning.
  B. The user traffic to the server is too high.
  C. A BSOD is occurring.
  D. The non-Windows servers cannot be located on the same UPS as the Windows server.
  C. A BSOD is occurring.

• Question 399:

  When installing processors with mixed stepping levels in a server, which of the following guidelines must be followed? (Select TWO).

  A. The processors must have different frequencies set to operate.
  B. The processor with the highest feature set must be the bootstrap processor.
  C. The processors must have different cache sizes set to operate.
  D. The processors must have the same cache size set.
  E. The processor with the lowest feature set must be the bootstrap processor.
  D. The processors must have the same cache size set.
  E. The processor with the lowest feature set must be the bootstrap processor.

• Question 400:

  An administrator is investigating an incident where an unauthorized user gained access to a server and modified HR files. The administrator has a tested theory as to how the user accomplished this. Which of the following actions should the administrator take NEXT?

  A. Perform a root cause analysis.
  B. Implement a change to the servers.
  C. Establish a plan of action to resolve the issue.
  D. Question users prior to implementing the solution.
  C. Establish a plan of action to resolve the issue.