CompTIA SK0-003 Online Practice Questions and Exam Preparation

CompTIA SK0-003 Online Questions & Answers

• Question 411:

  An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAID array. When the administrator reaches the option to select the target installation drive, there are no drives listed. Which of the following is the FIRST thing the administrator should do?

  A. Restart the installation via WDS.
  B. Shut down the server and check that all RAID drives are connected properly.
  C. Restart the installation from CD and press F6 to install RAID drivers.
  D. Go into the BIOS and set all RAID drives to compatibility mode.
  C. Restart the installation from CD and press F6 to install RAID drivers.

• Question 412:

  Which of the following can transmit block level storage over Ethernet?

  A. SAS
  B. iSCSI
  C. USB
  D. SATA
  B. iSCSI

• Question 413:

  Which of the following types of interfaces requires a terminator?

  A. SAS
  B. ATA
  C. SATA
  D. SCSI
  D. SCSI

• Question 414:

  Upgrading which of the following components in a server has the GREATEST affect on virtualization?

  A. Amount of Memory
  B. Number of HBAs
  C. Hard drive cache size
  D. ECC ability in memory
  A. Amount of Memory

• Question 415:

  Which of the following is a software layer that interacts between the virtualized operating system and the physical hardware?

  A. System Resource Manager
  B. Server BIOS
  C. Guest Operating System
  D. Hypervisor
  D. Hypervisor

• Question 416:

  A datacenter manager would like to ensure that all fire suppression in the datacenter is safe for the equipment in the room. Which of the following classifications should be listed on the fire suppression system?

  A. A
  B. B
  C. C
  D. D
  C. C

• Question 417:

  Which of the following can be used when installing the OS without a boot disk?

  A. ZFS
  B. VMFS
  C. PXE
  D. PBX
  C. PXE

• Question 418:

  Which of the following server types allows resolution of domain names to IP addresses?

  A. DHCP server
  B. DNS server
  C. Web server
  D. VLAN server
  B. DNS server

• Question 419:

  Which of the following commands can a technician use to identify the secondary DNS server address on a Windows network?

  A. ifconfig
  B. netstat
  C. tracert
  D. ipconfig
  D. ipconfig

• Question 420:

  A web server has to be available all the time. It has its own redundant power source and uninterruptible power supply (UPS). Which of the following actions will provide additional fault tolerance?

  A. Add a second DVD drive
  B. Add an extended runtime module (ERM) to the UPS
  C. Configure automated system recovery (ASR)
  D. Add a second NIC
  D. Add a second NIC