CompTIA SK0-003 Online Practice Questions and Exam Preparation

CompTIA SK0-003 Online Questions & Answers

• Question 161:

  A technician is replacing memory in a server whose motherboard supports PC2100 memory. This type of memory is also known as which of the following?

  A. DDR2
  B. DDR
  C. SDRAM
  D. DDR3
  B. DDR

• Question 162:

  Lightening causes a power surge and leads to a fire in the datacenter. Following emergency procedures, which of the following is the FIRST thing the server administrator should do?

  A. Turn off all electrical power
  B. Remove all backup media
  C. Implement fire suppression
  D. Evacuate all personnel
  D. Evacuate all personnel

• Question 163:

  When creating a list of vendors, which of the following information should be included?

  A. Vendor customer satisfaction ratings
  B. OEM contact information
  C. Time vendor has been in business
  D. Annual spending budget with the vendor
  B. OEM contact information

• Question 164:

  Several diagnostic LEDs on the back of a server are amber instead of green. Which of the following is the BEST place to research what the amber LED lights indicate?

  A. The OEM's website
  B. A social networking website
  C. A search engine website
  D. The OS manufacturer's website
  A. The OEM's website

• Question 165:

  Which of the following can help prevent data loss on a RAID array in the event of a power failure?

  A. Using a RAID mirror
  B. A battery backed write cache
  C. Using RAID with parity
  D. A battery backed read cache
  B. A battery backed write cache

• Question 166:

  A technician is considering upgrading a server to the latest version of the OS, but notices the tape drive is not on the latest version of the operating system's HCL. Which of the following should the technician do about this issue?

  A. The technician should contact the OS manufacturer.
  B. After the upgrade the technician should download and install the latest driver for the tape drive.
  C. The technician should not upgrade the OS.
  D. The technician should contact the OEM.
  C. The technician should not upgrade the OS.

• Question 167:

  When installing a server in a rack, which of the following locations describes where in the rack a server should be installed?

  A. On the very bottom U of the rack, with the UPS above the server
  B. In the middle of the rack to help balance the rack
  C. Closest to the bottom of the rack, above heavier equipment
  D. On the very top U of the rack, with the UPS directly below it
  C. Closest to the bottom of the rack, above heavier equipment

• Question 168:

  After connecting a server to a SAN, the server administrator cannot see any new disks presented in disk management. There are no error lights on the front of the server. Which of the following should the server administrator do NEXT?

  A. Reboot the SAN.
  B. Check for error lights on the SAN.
  C. Check for lights on the HBA.
  D. Reboot the server.
  C. Check for lights on the HBA.

• Question 169:

  The company has purchased one hundred and fifty new servers. The server administrator needs to build and deploy them as quickly as possible. Which of the following is the FASTEST method of building and deploying each server?

  A. Build each server from the OS manufacturer's build disk.
  B. Use an imaging system to manually deploy the build to the servers.
  C. Build each server with the manufacturer's build disk.
  D. Give the company build disk to the server manufacturer.
  D. Give the company build disk to the server manufacturer.

• Question 170:

  An administrator is building a server that will run a data warehousing application. The server was ordered with eight 300GB drives. The application requires a dedicated storage location for the OS and one for critical files. The critical file storage needs fast access but must provide high redundancy. The OS requires 100GB and the file requires 950GB. Which of the following configurations will BEST suit the data warehouse needs?

  A. OS: 3 Drives, RAID 1 with hot spare Files: 5 Drives, RAID 5 with hot spare
  B. OS: 2 Drives, RAID 1 Files: 6 Drives, RAID 1
  C. OS: 2 Drives, RAID 0 Files: 6 Drives, RAID 5
  D. OS: 2 Drives, RAID 1 Files: 6 Drives, RAID 5 with hot spare
  D. OS: 2 Drives, RAID 1 Files: 6 Drives, RAID 5 with hot spare