CompTIA SK0-003 Online Practice Questions and Exam Preparation

CompTIA SK0-003 Online Questions & Answers

• Question 151:

  Which of the following MUST be done when imaging a Windows Server that will be used as a template?

  A. Remove software
  B. Run Windows Updates
  C. Update drivers
  D. Sysprep
  D. Sysprep

• Question 152:

  A technician is installing a server with sixteen 1 TB drives. They want the benefit of both speed and redundancy. Which of the following RAID configurations should be used?

  A. RAID 0
  B. RAID 1
  C. RAID 3
  D. RAID 50
  D. RAID 50

• Question 153:

  Which of the following is the MINIMUM number of disks necessary for a RAID 50 array?

  A. 3
  B. 4
  C. 5
  D. 6
  D. 6

• Question 154:

  A technician is trying to configure an SNMP management station to collect performance data from a proprietary application which has been installed on the company server. The management console runs on a dedicated monitoring workstation. Which of the following should the technician configure in the monitoring console so that the agent can retrieve the proper performance data?

  A. The appropriate WMI queries must be configured on the monitoring agent.
  B. The monitoring agent's service must have administrative rights on the server.
  C. The appropriate MIBs must be configured on the monitoring agent.
  D. The monitoring agent must be configured to send SNMP traps to the server.
  C. The appropriate MIBs must be configured on the monitoring agent.

• Question 155:

  A hypervisor has 4GB of RAM, 1TB of RAID 5 SATA storage, two Xeon 2.4GHz Quad Core Processors, and four gigabit NIC cards. The hypervisor is running twelve guest operating systems and users are reporting slow response times. Which of the following is MOST likely the cause?

  A. Processor
  B. RAM
  C. HDD
  D. NIC
  B. RAM

• Question 156:

  An administrator is working on a rack mount server with all newly installed equipment. The uninterruptible power supply (UPS) in the rack starts beeping loudly. Which of the following is the FIRST troubleshooting step that should be taken?

  A. Ensure that the power cable for the UPS is plugged in.
  B. Ensure the battery in the UPS is still good.
  C. Check the smart cable connecting the UPS to the server.
  D. Reset the UPS to determine if the problem persists.
  A. Ensure that the power cable for the UPS is plugged in.

• Question 157:

  An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present. Which of the following could be the reason for this?

  A. The server BIOS firmware is out-of-date.
  B. The server does not have the correct drivers.
  C. The server hard drives have not begun to spin.
  D. The server has too little memory installed.
  A. The server BIOS firmware is out-of-date.

• Question 158:

  Which of the following allows a user to choose the operating system to load?

  A. Startup initialization
  B. Boot loader
  C. BIOS
  D. POST
  B. Boot loader

• Question 159:

  Due to slow backup response, an administrator installed a new driver for the SCSI card. After a server reboot the device is not working properly. Which of the following is the BEST course of action?

  A. Reboot the server and restore files using ASR.
  B. In Device Manager, locate the device, and click Roll Back Driver at the driver tab.
  C. Restore the driver from the previous backup tape.
  D. Go to Device Manager, locate the device, and click Restore Previous Driver at the driver tab.
  B. In Device Manager, locate the device, and click Roll Back Driver at the driver tab.

• Question 160:

  A server has failed after a tested and scheduled change control has been implemented. Which of the following is the FIRST thing the server technician should do?

  A. Perform a root cause analysis.
  B. Escalate the problem.
  C. Notify stakeholders.
  D. Establish a plan of action.
  C. Notify stakeholders.