SNIA S10-210 Online Practice Questions and Exam Preparation

SNIA S10-210 Online Questions & Answers

• Question 91:

  A company wants to implement a database which requires a storage subsystem with no more than 2 ms write latency and 1 ms read latency. Which type of drive would you use?

  A. SATA
  B. FC
  C. SSD
  D. ATA
  C. SSD

• Question 92:

  You are asked to secure 2.5 PB of data so that in case of a failed drive replacement, data on the drives is not usable. Which data protection method should be used in this case?

  A. Encrypting data-in-flight
  B. Encrypting data-at-rest
  C. Password protect each file
  D. Use file permissions
  B. Encrypting data-at-rest

• Question 93:

  Click the Exhibit button.

  

  Your company has purchased a new storage array that has dual management access network ports. You need to connect the array and provide maximum redundancy without affecting production traffic. Referring to the exhibit, where should the ports be attached?

  A. Cable one management access network port into management switch 1 and the other port into management switch 2.
  B. Cable both management access network ports into management switch 2.
  C. Cable one management access network port into core switch 1 and the other into core switch 2.
  D. Cable both management access network ports into management switch 1.
  A. Cable one management access network port into management switch 1 and the other port into management switch 2.

• Question 94:

  A server with a dual-ported HBA loses access to storage during switch SFP replacement. You want to prevent this from happening in the future. Which action should you perform?

  A. Use zoning
  B. Enable trunking.
  C. Use LUN masking
  D. Configure multipathing
  D. Configure multipathing

• Question 95:

  You want to visibly verify FC port initialization by reading an analyzer trace. Your objective is to find the frames associated with the initialization protocol to ensure that the FC device is operating correctly during the login process, to be recognized as part of the switched fabric, and appear in a directory of attached FC devices.

  What must all Fibre Channel devices do to accomplish this?

  A. Log in using the Name server.
  B. Log in using the Fabric Controller.
  C. Log in using the Management server.
  D. Log in using the Fabric Login server.
  D. Log in using the Fabric Login server.

• Question 96:

  A storage subsystems Web browser management interface reports that the subsystem has become degraded and remotely opens a service request with the vendor. Your vendors level three storage support engineer wants to remotely access your storage subsystem for troubleshooting.

  What is a SNIA Storage Security Best Current Practices solution?

  A. Open firewall ports to allow the vendor's support engineer to access the Web browser management interface.
  B. Provide the vendor's support engineer with a temporary user ID that has sudo access to become a super user on the storage subsystem; this ensures an audit trail for all remote support activities.
  C. Provide the vendor's support engineer with a shared remote control session where you can monitor what the support engineer is doing while troubleshooting the subsystem without needing to share credentials.
  D. Provide a temporary user ID to allow the vendor's support engineer to access the Web browser management interface remotely over HTTP/TLS.
  C. Provide the vendor's support engineer with a shared remote control session where you can monitor what the support engineer is doing while troubleshooting the subsystem without needing to share credentials.

• Question 97:

  You are provisioning storage to a host with multipathing software installed and correctly configured. You discover that there are four paths to LUNs instead of the expected eight paths. Why does this happen?

  A. Incorrect zoning
  B. Incorrect multipathing policy
  C. Incorrect LUN masking
  D. Incorrect LUN size
  A. Incorrect zoning