NetApp NS0-515 Online Practice Questions and Exam Preparation

NetApp NS0-515 Online Questions & Answers

• Question 31:

  Click the Exhibit button.

  

  Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?

  A. protocol errors, encoding errors, or conversion errors
  B. faulty SFPs, cables, or patch panels
  C. twisted cables, wrong plugs, or cable material
  D. wrong switch configuration
  A. protocol errors, encoding errors, or conversion errors

• Question 32:

  Where would you find the version of the driver and firmware for QLogic HBAs that are supported by NetApp E-Series systems?

  A. Interoperability Matrix Tool
  B. SANtricity Admin Guide
  C. Hardware Universe
  D. QLogic download webpage
  D. QLogic download webpage

• Question 33:

  A company is using the Federal Information Processing Standard (FIPS) on all volume groups. However, one volume group failed a security audit. In this scenario what would cause a volume group to fail the security audit?

  A. An FDE drive was added as a spare in the volume group
  B. Data Assurance was changed to "disabled" for the volume group
  C. The Secure Erase operation was applied to the volume group disks
  D. Connectivity to the key server was interrupted
  A. An FDE drive was added as a spare in the volume group

• Question 34:

  In which two locations would you find the WWPNs for a Windows host? (Choose two.)

  A. FC switch
  B. host's BIOS
  C. Windows Device Manager
  D. HBA vendor's utility
  A. FC switch
  D. HBA vendor's utility

• Question 35:

  Which three factors should you consider before you install an E2860 in a data center? (Choose three.)

  A. current draw
  B. heat dissipation
  C. fire suppression capacity
  D. electromagnetic interference
  E. ambient temperatures
  B. heat dissipation
  C. fire suppression capacity
  E. ambient temperatures

• Question 36:

  You want to find detailed information about the devices that are connected to the Brocade switch. In this scenario, which command would accomplish this goal?

  A. portloginshow
  B. zoneshow
  C. nsshow
  D. switchshow
  A. portloginshow

• Question 37:

  Which two actions must be performed to enable iSCSI multipathing on Windows for NetApp E-Series systems? (Choose two.)

  A. Set up iSCSI IP addresses on the E-Series system and the Windows host
  B. Install the Host Utilities on the Windows host
  C. Create two VSANs on the iSCSI switches
  D. Install a Host Channel Adapter (HCA) on the Windows host
  A. Set up iSCSI IP addresses on the E-Series system and the Windows host
  B. Install the Host Utilities on the Windows host

• Question 38:

  A customer needs to add an EF280 with FC into its existing Brocade fabric but the FC ports in the SANtricity System Manager are showing the FC ports as down and the LED on the FC HIC is amber. Which three tasks does the installer need to complete to solve this problem? (Choose three.)

  A. Verify that the ports are enabled on the switch
  B. Verify that the cables are plugged into the switch
  C. Verify that the server HBA has the boot BIOS enabled
  D. Verify that the EF280s management port is up
  E. Verify that the switch zone has the WWPNs for the EF280 and Server HBAs
  A. Verify that the ports are enabled on the switch
  B. Verify that the cables are plugged into the switch
  E. Verify that the switch zone has the WWPNs for the EF280 and Server HBAs

• Question 39:

  A company has a duplex E-Series system that is operating in a highly tuned environment. Load distribution between the controllers has been manually set up to achieve a specific distribution based on unique workload characteristics. In this scenario, to maintain this load distribution over time, which E-Series feature should be disabled?

  A. Storage Load Balancer
  B. Automatic Node Balancer
  C. DNS Load Balancing
  D. Automatic Load Balancing
  D. Automatic Load Balancing

• Question 40:

  Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two.)

  A. Test SSO login
  B. Configure In-Band Management
  C. Map roles
  D. Configure LDAP
  A. Test SSO login
  B. Configure In-Band Management