NetApp NS0-515 Online Practice Questions and Exam Preparation

NetApp NS0-515 Online Questions & Answers

• Question 11:

  Click the Exhibit button.

  

  An administrator is asked to create a 5532 GiB volume from the volume group. Referring to the exhibit, how would the administrator complete this request?

  A. Create the volume after performing space reclamation
  B. Create the volume after consolidating the capacity
  C. Create the volume from the available capacity
  D. Create the volume after adjusting the preservation capacity
  C. Create the volume from the available capacity

• Question 12:

  An administrator is asked to provision a 1 TB volume to hold non-critical temporary data for a seismic-analysis application. The volume requires the highest possible IOPS. In this scenario, which configuration would satisfy this requirement?

  A. RAID 6 Dynamic Disk Pool with a 256 KiB segment size
  B. RAID 5 volume group with a 256 KiB segment size
  C. RAID 0 volume group with a 32 KiB segment size
  D. RAID 6 Dynamic Disk Pool with a 32 KiB segment size
  B. RAID 5 volume group with a 256 KiB segment size

• Question 13:

  Click the Exhibit button.

  

  Referring to the exhibit, which SAS connector is supported on the NetApp E2800 E-Series family?

  A. 1
  B. 4
  C. 2
  D. 3
  D. 3

• Question 14:

  An orphaned volume occurs during an asynchronous mirror implementation. You must recover the orphaned volume. In this scenario, which statement is correct?

  A. Remove the mirroring relationship on the orphan, then re-create the mirroring relationship
  B. Suspend mirroring operations on the orphan, then resume operations
  C. Deactivate the mirror consistency group that contains the orphan, then re-enable the group
  D. Perform a role change on the orphan, then re-create the mirroring relationship
  A. Remove the mirroring relationship on the orphan, then re-create the mirroring relationship

• Question 15:

  An administrator is asked to create a Dynamic Disk Pools (DDP) pool from eleven 12 TB disks with the requirement that there is adequate space available for a reconstruction if a drive in the pool fails. In this scenario, what should the administrator do to satisfy this requirement?

  A. Create the disk pool, and then edit the pool to reserve 12 TB of space
  B. Create the disk pool, and then add another 12 TB drive to the pool
  C. Create the disk pool, and then the system automatically reserves 12 TB of space
  D. Create the disk pool, and then create a hot spare on another 12 TB disk
  D. Create the disk pool, and then create a hot spare on another 12 TB disk

• Question 16:

  Click the Exhibit button.

  

  Referring to the exhibit, which cable is an InfiniBand 4X connector?

  A. 3
  B. 1
  C. 2
  D. 4
  C. 2

• Question 17:

  Your company has an E-Series system connected to Cisco MDS switches. You are asked to provision a volume on a new Windows host, but the Windows host is unable to connect to the volume on the E-Series system. All other Windows hosts in the fabric are able to connect to their volumes.

  In this scenario, which three actions should you perform to accomplish this task? (Choose three.)

  A. Create a new virtual SAN (VSAN)
  B. Obtain the WWPN for the Windows HBA
  C. Restart the switches
  D. Create a single-initiator zone with the host and E-Series system
  E. Add a zone to the active zoneset
  B. Obtain the WWPN for the Windows HBA
  C. Restart the switches
  E. Add a zone to the active zoneset

• Question 18:

  A company wants the most scalable host-side connection topology for E-Series systems. In this scenario, which FC topology would satisfy the requirement?

  A. direct connect
  B. fabric attach
  C. private loop
  D. arbitrated loop
  B. fabric attach

• Question 19:

  Which data protection strategy has the most overhead capacity as a percentage of the total capacity?

  A. RAID 10
  B. RAID 6
  C. RAID 5
  D. Dynamic Disk Pools (DDP)
  C. RAID 5

• Question 20:

  A customer is configuring an EF570 system on an internal network. Due to security concerns, the network does not have Internet access. The customer wants to regularly send standard support data to NetApp. In this scenario, what should the customer do to accomplish this task?

  A. Enable AutoSupport with a set interval and with the store locally option selected, manually move the data to a server with Internet access, and then send the data to NetApp.
  B. Open a support ticket with NetApp to enable AutoSupport local functionality, manually move the data to a server with Internet access, and then send the data to NetApp.
  C. Set up a script to initiate Collect Support Data on a set interval, manually move the data to a server with Internet access, and then send the data to NetApp.
  D. Set up a script to initiate Collect Support Data, remove the extra log files, manually move the data to a server with Internet access, and then send the data to NetApp.
  A. Enable AutoSupport with a set interval and with the store locally option selected, manually move the data to a server with Internet access, and then send the data to NetApp.