NetApp NS0-506 Online Practice Questions and Exam Preparation

NetApp NS0-506 Online Questions & Answers

• Question 61:

  You configure space-reserved LUNs on thick-provisioned volumes, and you want to guarantee overwrites. How would you accomplish this task?

  A. Set the fractional reserve to 0%.
  B. Enable space allocation.
  C. Set the fractional reserve to 100%.
  D. Disable the fractional reserve.
  A. Set the fractional reserve to 0%.

• Question 62:

  Exhibit cl01::>ucadmin show Current Current Pending Pending Admin

  Node Adapter Mode Type Mode

  cl01-01 0c fc target - online cl01-01 0d fc target - online cl01-01 3a cna target - online cl01-01 3b cna target - online cl01-01 4a cna target - online cl01-01 4b cna target - online cl02-01 0c fc target - online cl02-01 0d fc target - online cl01-02 3a cna target - online cl01-02 3b cna target - online cl01-02 4a cna target - online cl01-02 4b cna target - online 12 entries were displayed. cl01::> Referring to the exhibit, which cables are valid for connecting port 0d on node cl01-02 when the switch is 10 meters away?

  A. Twinax copper SFP+ active cables
  B. Twinax copper SFP+ passive cables
  C. LC/LC optical OM3 cables
  D. RJ45 Cat6 Ethernet cables
  B. Twinax copper SFP+ passive cables

• Question 63:

  A customer has a clustered Data ONTAP solution and needs to connect several Windows 2012 servers using iSCSI for LUN access. Before the LUN can be seen, what must be configured on the host?

  A. the LUN partitioning
  B. the Host Utilities Kit
  C. the iSCSI software initiator
  D. the HBA queue depth
  B. the Host Utilities Kit

• Question 64:

  A customer has recently deployed a clustered Data ONTAP 8.3 system and is trying to mount LUNs to a Windows 2012 Server using the iSCSI protocol. They have enabled jumbo frames on their nodes as well as their Windows 2012 Server. Whenever they attempt to scan for a new LUNs, Disk Management times out and does not present any new storage.

  What is causing the problem?

  A. Windows 2012 does not support jumbo frames with the iSCSI protocol.
  B. Clustered Data ONTAP 8.3 does not support the iSCSI protocol.
  C. They have jumbo frames enabled on the host and storage, but not the Ethernet switches.
  D. Clustered Data ONTAP 8.3 does not support jumbo frames with the iSCSI protocol.
  C. They have jumbo frames enabled on the host and storage, but not the Ethernet switches.

• Question 65:

  A customer is configuring their host for FC connectivity to a clustered Data ONTAP storage solution. They have installed a 4 GB FC HBA into the host and connected it with optical cables to an 8 GB FC switch. They have also connected the UTA2 ports from the FAS2552 with 16 GB SFP+ optics installed using optical cables to the switch.

  Which two actions will improve host FCP throughput? (Choose two.)

  A. replacing the existing 8 GB FC switch with a new 16 GB FC switch.
  B. replacing the switch with a 10 GB Ethernet switch
  C. adding 16 GB FC HBA and appropriate optics
  D. replacing the optical cables with copper TwinAx cables.
  B. replacing the switch with a 10 GB Ethernet switch
  C. adding 16 GB FC HBA and appropriate optics