NetApp NCIE-SAN Specialist NS0-506 Questions & Answers

• Question 41:

  What is a NetApp-recommended zoning best practice?

  A. Switch port zoning should always be employed.

  B. WWNN zoning is required.

  C. Single-initiator zoning is recommended.

  D. Zones can overlap.

  Correct Answer: C

• Question 42:

  Which resource would you use to search for information about the configurations for NetApp products that work with third-party solutions?

  A. Config Advisor

  B. Host Utility Kit

  C. Interoperability Matrix Tool

  D. Clustered Data ONTAP 8.3 SAN Administration Guide

  Correct Answer: C

• Question 43:

  You created a 5 TB VMware volume "vol_esx_nfs1" in "svm1" for an NFS datastore. The storage efficiency savings of the vmdks are one over 50%, but the application team wants to minimize the possibility of an out-of-space condition. You enable autogrow, autoshrink, and snapshot autodelete with the following commands:

  volume modify -vserver vm1 -volume vol_esx_nfs1 -space-mgt-try-first

  volume_grow snapshotautodelete modify -vserver vm1 -volume vol_esx_nfs1 -enabled true delete

  orderoldest_first -target-free-space 10% -trigger volume

  volautosize -vserver vm1 -volume vol_esx_nfs1 -mode grow_shrink -maximum-size10 TB minimum-size 5 TB -grow-threshold-percent 80 -shrink-threshold-percent 60

  What will these commands do?

  A. Delete the oldest Snapshot copies before growing the volume.

  B. Increase the Snapshot copy reserve before growing the volume.

  C. Shrink the volume before deleting the Snapshot copies.

  D. Grow the volume before deleting the Snapshot copies.

  Correct Answer: B

• Question 44:

  A company has a 4-node Data ONTAP cluster called cl01. The administrator attempts to create a volume on svm1 and can only select aggregates that are owned by node cl01-01 or cl01-02.

  What is causing the problem?

  A. The SVM peering relationship has not been configured with the cl01-03 and cl01-04 HA pair.

  B. The storage virtual machine is not configured to use nodes cl01-03 or cl01-04.

  C. No LIFs have been created on nodes cl01-03 or cl01-04.

  D. Volume creation delegation is not configured to allow use of cl01-03 or cl01-04 owned aggregates.

  Correct Answer: B

• Question 45:

  Exhibit

  cl01::>ucadmin show Current Current Pending Pending Admin Node Adapter Mode Type Mode

  cl01-01 0c fc target - online cl01-01 0d fc target - online cl01-01 3a cna target - online cl01-01 3b cna target - online cl01-01 4a cna target - online cl01-01 4b cna target - online cl02-01 0c fc target - online cl02-01 0d fc target - online cl01-02 3a cna target - online cl01-02 3b cna target - online cl01-02 4a cna target - online cl01-02 4b cna target - online 12 entries were displayed. cl01::>

  Referring to the exhibit, which cables are valid for connecting port 0d on node cl01-02 when the switch is 10 meters away?

  A. Twinax copper SFP+ active cables

  B. Twinax copper SFP+ passive cables

  C. LC/LC optical OM3 cables

  D. RJ45 Cat6 Ethernet cables

  Correct Answer: B

• Question 46:

  Click the Exhibit button.

  An administrator is attempting to map an iSCSI LUN to a Windows 2012 host, but the windows host fails to discover the iSCSI targets.

  Referring to the exhibit, what is the connectivity problem?

  Exhibit:

  

  A. The iSCSI service is running on svm1, but iSCSI is not licensed on the nodes.

  B. The iSCSI LIFs are not currently on their home port.

  C. The iSCSI LIFs are currently disabled.

  D. The LIFs do not have a failover group defined.

  Correct Answer: A

• Question 47:

  An administrator wants to provide isolation among physical devices connected to the same FCP fabric. Which Cisco switch feature accomplishes this task?

  A. VSAN

  B. FSIP

  C. LUN masking

  D. logical domains

  Correct Answer: A

• Question 48:

  You are creating a logical diagram for an FCP SAN solution.

  You need to show connectivity between which three sets of components? (Choose three.)

  A. management port and ACP cabling

  B. inter-cluster network ports and hosts

  C. hosts and FCP switches

  D. hosts and FCoE switches

  E. FCP switches and storage controller

  Correct Answer: BDE

• Question 49:

  When designing a new SAN solution, which three components should be verified with the IMT? (Choose three.)

  A. the connection protocol

  B. the patch panel make and model

  C. host OS type and version

  D. the type of Ethernet switch

  E. the clustered Data ONTAP version

  Correct Answer: CDE

• Question 50:

  Which two port personality combinations are valid for the onboard UTA2 ports on a FAS8040 controller?

  A. e0e/0e - fc e0f/0f - fc e0g/0g - cna e0h/0h -cna

  B. e0e/0e - fc e0f/0f - cna e0g/0g - fc e0h/0h -cna

  C. e0e/0e - fc e0f/0f - fc e0g/0g - fc e0h/0h -cna

  D. e0e/0e - cna e0f/0f -cna e0g/0g - fc e0h/0h - fc

  Correct Answer: C