Exam Details

  • Exam Code
    :NS0-505
  • Exam Name
    :NetApp Certified Implementation Engineer – SAN ESeries
  • Certification
    :NCIE-SAN ESeries
  • Vendor
    :NetApp
  • Total Questions
    :52 Q&As
  • Last Updated
    :May 14, 2024

NetApp NCIE-SAN ESeries NS0-505 Questions & Answers

  • Question 41:

    A d-stripe within a disk pool is always the equivalent of _______. (Choose the best answer.)

    A. 9+1 RAID 3

    B. 9+1 RAID 5

    C. 8+2 RAID 6

    D. 5+5 RAID 10

    E. 10+0 RAID 0

  • Question 42:

    The system automatically disables write caching when _________. (Choose the best answer.)

    A. a disk pool is being expanded by adding a drive

    B. a failed disk drive has put a volume group into a degraded state

    C. there is a failed controller on the system, so that cache mirroring is unavailable

    D. the systemdetects a small percentage of cache hits over a 10-minute timeframe

    E. more than 4 unique host identifiers are trying to access the same volume

  • Question 43:

    Which three methods can be used to increase the space available to clients? (Choose three.)

    A. Increase volume segment size

    B. Convert RAID-6 volume group to RAID-5

    C. Create new volume groups from unconfigured capacity

    D. Fill empty drive slots in the array

    E. Replace some HDD with SSD

  • Question 44:

    With ALUA support, how does the storage system handle I/Os to the non-preferred path? (Choose the best answer.)

    A. The controller handles them normally, updating both controllers'cache to maintain consistency, which is why ALUA requires cache mirroring to be enabled.

    B. They are accepted but maintained in cache with a special change log, and only processed after 5 minutes when volume ownership may be changed.

    C. They are shipped over to the owning controller to be managed, then returned through the non-preferred path after completion.

    D. They are rejected with a specific SCSI check condition.

    E. The non-owning controller takes ownership of the volume in order to handle them, then restores ownership to the original controller.

  • Question 45:

    Review the diagram.

    Is this cabling correct or incorrect, and why? (Choose the best answer.)

    A. The cabling is incorrectbecauseeach controller goes to only one stack of disk shelves

    B. The cabling is correct for the dual stack cabling method

    C. The cabling is incorrect because it uses the top-down bottom-up cabling method

    D. The cabling is incorrect because the controllers are cabled from the host port.

  • Question 46:

    What system file is used during the controller start-of-day sequence to determine various SCSI parameters and other host-type specific settings for an E-Series system? (Choose the best answer.)

    A. Major Event Log

    B. ESM Firmware

    C. NVSRAM

    D. Unreadable Sectors Log

  • Question 47:

    The ability of many E-Series controllers to hold an additional firmware image in reserve _________. (Choose the best answer.)

    A. is used to store a backup boot image

    B. allows controller firmware to be downloaded immediately and activated at a later time

    C. allows two firmware images to be used at the same time

    D. is used for Support use only

  • Question 48:

    What is SMAgent? (Choose the best answer.)

    A. a host server process that enables storage system management with the storage data path

    B. an OS-dependent collection of utilities for servers attached to SANtricity-managed storage systems

    C. a GUI or CLI run on a host server used for storage system management

    D. a host I/O performance modeling interface

    E. inter-process communication that supports computer program subroutines

  • Question 49:

    Consult the ___________ to determine the current link status of a host port. (Choose the best answer.)

    A. Storage Array Profile

    B. Real-time performance monitor

    C. Recovery Guru

    D. Unreadable Sectorslog

  • Question 50:

    What should you do to confirm a component failure prior to replacing hardware? (Choose the best answer.)

    A. Run the Recovery Guru

    B. Run chkdsk on the client

    C. Check the Major Events Log

    D. Power cycle the storage array

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only NetApp exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your NS0-505 exam preparations and NetApp certification application, do not hesitate to visit our Vcedump.com to find your solutions here.