NetApp NS0-505 Online Practice Questions and Exam Preparation

NetApp NS0-505 Online Questions & Answers

• Question 31:

  When you arrive on a customer site, you discover that the customer network administrator has called in sick. While required power has been provided and all of the components ordered have been physically accounted for, the network will not

  be operational today.

  Which would be the most useful tool to complete your rack and stack and initial configuration of the system? (Choose the best answer.)

  A. a Serial Port cable
  B. a CD containing the 10.86 version of SANtricity
  C. a standalone switch or hub
  D. None of the above, come back tomorrow.
  B. a CD containing the 10.86 version of SANtricity

• Question 32:

  A d-stripe within a disk pool is always the equivalent of _______. (Choose the best answer.)

  A. 9+1 RAID 3
  B. 9+1 RAID 5
  C. 8+2 RAID 6
  D. 5+5 RAID 10
  E. 10+0 RAID 0
  C. 8+2 RAID 6

• Question 33:

  What is the first step when replacing a FRU component on a running storage system? (Choose the best answer.)

  A. Disconnect the cables from the management ports.
  B. Power down the array before changing the part.
  C. Remove the part and check SANtricity for continuing errors.
  D. Use SANtricity to view the target component and place the component off-line or in service mode before removing the part.
  D. Use SANtricity to view the target component and place the component off-line or in service mode before removing the part.

• Question 34:

  What happens if you choose one disk that has a capacity of 300 GB and five others that have a capacity of 900 GB for a volume group? (Choose the best answer.)

  A. All disks are recognized as 900 GB in capacity.
  B. All disks are recognized as 300 GB in capacity.
  C. Each disk is recognized as its particular capacity.
  D. Mixing disk capacities is not supported in E-Series volume groups.
  C. Each disk is recognized as its particular capacity.

• Question 35:

  What would be the minimum configuration required to support a drawer-protected 20-drive DDP? (Choose the best answer.)

  A. An E2624 with four DE5600 Expansion Chassis, containing a total of 6, 1.6TB SSD and 96, 3T NL-SAS drives.
  B. An E5460 with one DE6600 Expansion Chassis, containing a total of 120, 3TB NL-SAS drives.
  C. An E2712 with one DE6600 Expansion Chassis, containing a total of 72, 3TB NL-SAS drives.
  D. An E5424 with one DE5600 Expansion Chassis, containing a total of 48, 900GB SAS drives.
  B. An E5460 with one DE6600 Expansion Chassis, containing a total of 120, 3TB NL-SAS drives.

• Question 36:

  Consult the ___________ to determine the current link status of a host port. (Choose the best answer.)

  A. Storage Array Profile
  B. Real-time performance monitor
  C. Recovery Guru
  D. Unreadable Sectorslog
  A. Storage Array Profile

• Question 37:

  When data is written to a snapshot, volume is stored __________. (Choose the best answer.)

  A. on the base volume for that snapshot
  B. on the repository area associated with the snapshot's corresponding image
  C. on the repository associated with the snapshot volume
  D. on the common repository for the snapshot group
  E. on a hot spare drive
  D. on the common repository for the snapshot group

• Question 38:

  The interval for an asynchronous mirror group should usually be equal to ______________. (Choose the best answer.)

  A. the corresponding application's RPO
  B. half the corresponding application's RPO
  C. half the corresponding application's RTO
  D. the corresponding application's RTO
  E. the amount of time required to copy the size of the mirror repository to the remote site
  E. the amount of time required to copy the size of the mirror repository to the remote site

• Question 39:

  Which component of an E-Series storage system should always be upgraded first? (Choose the best answer.)

  A. ESM firmware
  B. Controller firmware
  C. Controller NVSRAM
  D. SANtricity management client
  B. Controller firmware

• Question 40:

  The ability of many E-Series controllers to hold an additional firmware image in reserve _________. (Choose the best answer.)

  A. is used to store a backup boot image
  B. allows controller firmware to be downloaded immediately and activated at a later time
  C. allows two firmware images to be used at the same time
  D. is used for Support use only
  C. allows two firmware images to be used at the same time