NetApp NS0-504 Online Practice Questions and Exam Preparation

NetApp NS0-504 Online Questions & Answers

• Question 81:

  Which system is recommended as a secondary system for SnapVault?

  A. IS1200
  B. DataFort
  C. NearStore VTL
  D. FAS with NearStore license
  D. FAS with NearStore license

• Question 82:

  What will configuring the FCP service for a Vserver do?

  A. It will disable any NAS protocols for that Vserver.
  B. It will create a target World Wide Node Name for the Vserver.
  C. It will log the storage controllers' target adapters into the attached Fibre Channel fabric.
  D. It will allow igroups to be created on the Vserver.
  B. It will create a target World Wide Node Name for the Vserver.

• Question 83:

  Which MetroCluster configuration procedure is recommended for re-establishing a mirrored volume that was in a level-0 resynchronization state when it failed?

  A. Determine which volumes are at the remote and disaster sites.
  B. Re-create the synchronous mirror.
  C. Rejoin the two volumes.
  D. Turn on power to the cluster node at the disaster site.
  B. Re-create the synchronous mirror.

• Question 84:

  Which storage system command would display the WWPNs of hosts that have logged into storage system using a Fibre Channel connection?

  A. fcp config
  B. fcp initiator show
  C. fcp show i
  D. fcp show initiator
  D. fcp show initiator

• Question 85:

  You cannot remove the SyncMirror license if one or more mirrored volumes exist.

  A. True
  B. False
  A. True

• Question 86:

  Which statement is true about a Data Protection (DP)-type SnapMirror destination volume?

  A. It can be in a Data ONTAP GX cluster.
  B. It must be on the same disk type as the source volume.
  C. It can be smaller than the source volume.
  D. It can be on a different disk type than the source volume.
  D. It can be on a different disk type than the source volume.

• Question 87:

  Which two methods expose volumes to NAS clients? (Choose two.)

  A. mount directories of a volume in a namespace
  B. mount the required namespaces in a volume
  C. mount the required namespaces in an aggregate
  D. mount the required volumes in a namespace
  A. mount directories of a volume in a namespace
  D. mount the required volumes in a namespace

• Question 88:

  Data ONTAP uses inodes in an active file system to reference ___________.

  A. qtrees
  B. disk blocks
  C. file segments
  D. Snapshot copies
  B. disk blocks

• Question 89:

  Which mechanism allows you to make LUNs available to some initiators and unavailable to others?

  A. LUN masking
  B. LUN grouping
  C. LUN cloning
  D. LUN hiding
  A. LUN masking

• Question 90:

  Click the Exhibit button.

  

  You see the following error on the storage controller's console or messages file. What is the most likely cause for this error?

  A. portal group misconfiguration
  B. iSCSI CHAP misconfiguration
  C. iSNS misconfiguration
  D. IPsec misconfiguration
  B. iSCSI CHAP misconfiguration