NetApp NS0-502 Online Practice Questions and Exam Preparation

NetApp NS0-502 Online Questions & Answers

• Question 61:

  Click the Exhibit button.

  

  Based on the diagram shown, what is the appropriate FC switch topology?

  A. core-edge
  B. full mesh
  C. partial mesh
  D. partial cascade
  C. partial mesh

• Question 62:

  What are two performance tuning parameters available for Fibre Channel HBAs on a host? (Choose two.)

  A. LUN queue depth
  B. HBA BootBIOS enabled
  C. Fibre Channel speed
  D. LUN device ID
  A. LUN queue depth
  C. Fibre Channel speed

• Question 63:

  For which four operations would you use igroup throttles on a NetApp storage solution? (Choose four.)

  A. to assign a specific percentage of the queue resources on each physical port to the igroup
  B. to manage pathing to the LUNs
  C. to reserve a minimum percentage of queue resources for a specific igroup
  D. to limit the number of concurrent I/O requests an initiator can send to the storage system
  E. to restrict an igroup to a maximum percentage of use
  F. to manage space reclamation
  A. to assign a specific percentage of the queue resources on each physical port to the igroup
  C. to reserve a minimum percentage of queue resources for a specific igroup
  D. to limit the number of concurrent I/O requests an initiator can send to the storage system
  E. to restrict an igroup to a maximum percentage of use

• Question 64:

  Click the Exhibit button.

  

  

  

  Given the information provided in the diagram, what is the appropriate FC topology?

  A. point-to-point
  B. switched fabric
  C. arbitrated loop
  D. ring
  B. switched fabric

• Question 65:

  Which host-based tool will enable you to stripe a LUN across multiple NetApp controllers?

  A. multipathing software
  B. host-based file system
  C. host-based volume manager
  D. HBA driver
  C. host-based volume manager

• Question 66:

  You need to gather information from the host systems that will be attached to the NetApp storage system using either FC or iSCSI. This information includes operating system version, patch levels, open bus slots, and cards in bus slots. What other information must you gather from the host systems?

  A. bus type (PCIe and/or PCI-x) and video adapters
  B. memory in system and Ethernet ports (both used and free)
  C. bus type (PCIe and/or PCI-x)and Ethernet ports (both used and free)
  D. bus type (PCIe and/or PCI-x) and Serial ports (both used and free)
  C. bus type (PCIe and/or PCI-x)and Ethernet ports (both used and free)

• Question 67:

  Which software feature must be supported and configured on the NetApp storage controller to configure multipath high availability between the storage controller and disk shelves?

  A. MetroCluster
  B. Software Disk Ownership
  C. Snapshot copies
  D. Single System Image cfmode
  B. Software Disk Ownership

• Question 68:

  When does Fractional Reservation reserve space from the volume?

  A. Volume Creation
  B. LUN Creation
  C. LUN SnapMirror
  D. Volume Snapshot
  D. Volume Snapshot

• Question 69:

  You connect a host to a NetApp storage system through an FC switch. The host has its boot volumes on the NetApp storage system. What is mandatory for you to configure?

  A. persistent binding
  B. port zoning
  C. portsets
  D. WWPN zoning
  A. persistent binding

• Question 70:

  for access to a VMFS datastore created on a NetApp LUN on an ESX 4.0 system for an ALUA configuration, the path selection policy should be set to:

  A. MRU (Most Recently Used)
  B. Fixed
  C. RR (Round Robin)
  D. ALUA
  C. RR (Round Robin)