NetApp NS0-192 Online Practice Questions and Exam Preparation

NetApp NS0-192 Online Questions & Answers

• Question 11:

  You order a FAS8200 cluster with 4 TB SATA drives. Before executing the cluster setup command, you notice that ADP is not being used. In this scenario, which statement is correct?

  A. Halt the nodes and configure ADP at the LOADER-X> prompt.
  B. Complete the cluster setup and use OnCommand System Manager to configure ADP.
  C. While executing the cluster setup command, reconfigure the disks to use ADP.
  D. Halt the nodes, boot to the special boot menu, and configure ADP.
  D. Halt the nodes, boot to the special boot menu, and configure ADP.

• Question 12:

  Using QoS statistics for a group of volumes on one node, you notice that most of the latency comes from the data layer. In this scenario, which statement is correct?

  A. There is too much indirect traffic from other nodes.
  B. QoS processing is increasing CPU usage.
  C. The CPU on the node is overused.
  D. High disk use is increasing CPU usage.
  D. High disk use is increasing CPU usage.

• Question 13:

  A customer explains that the Active IQ section of the NetApp Support site indicates that their controller has not called home within the past three months. They are not using a mail host to deliver AutoSupport notifications. When troubleshooting the AutoSupport message, you enter the event log show -messagename asup.post* command.

  In this scenario, what would you expect to see on the console?

  A. event-management system (EMS) events for the AutoSupport system that are related to SMTP
  B. a history of all error events related to the AutoSupport system
  C. event-management system (EMS) events for the AutoSupport system that are related to HTTP/HTTPS
  D. event-management (EMS) events for the AutoSupport system that are related to any protocol
  A. event-management system (EMS) events for the AutoSupport system that are related to SMTP

• Question 14:

  A customer recently performed an ONTAP upgrade and would like to confirm the successful completion of the process. Which three actions would satisfy this requirement? (Choose three.)

  A. Execute the version command at the cluster shell.
  B. Verify the version from the new AutoSupport that was automatically triggered after an upgrade.
  C. A System Message notification will be shown upon reboot after a successful upgrade.
  D. Execute the system node upgrade-revert show command at the cluster shell.
  E. Execute the system node upgrade-revert show-task-status command at the cluster shell.
  A. Execute the version command at the cluster shell.
  C. A System Message notification will be shown upon reboot after a successful upgrade.
  D. Execute the system node upgrade-revert show command at the cluster shell.

• Question 15:

  You have a vSphere Essentials Plus environment configured with NetApp LUNs for datastores. You are backing up the environment using the SnapCenter Plug-in for VMware vSphere. However, you are having problems performing restore operations using SnapCenter.

  What is a reason for this problem?

  A. NetApp Virtual Storage Console is required for restore operations.
  B. Only NFS datastores are supported with SnapCenter.
  C. A Windows-based vCenter Server is required.
  D. VMware Storage vMotion is not licensed.
  D. VMware Storage vMotion is not licensed.

• Question 16:

  You have an ONTAP 9.3 cluster and create a new SnapMirror relationship with a SnapMirror type of DP. You initialize the SnapMirror relationship and verify the incremental updates are operating as expected. However, you notice that the SnapMirror type is XDP instead of the specified DP.

  In this scenario, which statement is correct?

  A. All new relationships default to XDP.
  B. DP is not supported in ONTAP 9.3
  C. The SnapMirror policy type was set to MirrorAllSnapshots.
  D. The destination cluster is running an older version of ONTAP.
  C. The SnapMirror policy type was set to MirrorAllSnapshots.

• Question 17:

  A customer can no longer connect to a data LIF after upgrading from ONTAP 9.1 to ONTAP 9.2. A packet trace shows the data LIF is responding to the initial SYN with a SYN/ACK. This SYN/ACK never makes it to the client. In this scenario, which statement is correct?

  A. ONTAP 9.2 does not have IP FastPath.
  B. ONTAP 9.2 does not have Large Receive Offload.
  C. ONTAP 9.2 does not have LACP.
  D. ONTAP 9.2 does not have TCP Segmentation Offload.
  A. ONTAP 9.2 does not have IP FastPath.

• Question 18:

  Click the Exhibit button.

  

  A backup administrator notices throughput problems during backup jobs. While the job is running, you review the QoS output for the target volume. Referring to the exhibit, which statement is correct?

  A. The volume is encountering the QoS limit.
  B. The network is slow.
  C. The data layer of the controller is slow.
  D. The traffic is going over an indirect path in the cluster.
  A. The volume is encountering the QoS limit.

• Question 19:

  You have severe database performance issues with a server connected to 8-Gb FC switches to storage. You know that the problem is not the storage because the QoS output indicates that the issue is outside the controller. You need to examine each piece of the chain, such as switch port status and the host contribution to latency.

  In this scenario, which NetApp product would provide the required information?

  A. OnCommand Unified Manager
  B. OnCommand Insight
  C. SnapDrive
  D. OnCommand Performance Manager
  D. OnCommand Performance Manager

• Question 20:

  You want to replicate all volumes of an SVM, including the SVM's configuration data, to another cluster on an hourly schedule. Which action should you perform to accomplish this task?

  A. Configure SVM disaster recovery between the two SVMs.
  B. Configure SyncMirror between the two clusters.
  C. Configure SnapMirror replication for the volumes with a relationship type of DP.
  D. Configure SnapMirror replication for the volumes with a relationship type of XDP.
  A. Configure SVM disaster recovery between the two SVMs.