NetApp Netapp Other Certification NS0-181 Questions & Answers

• Question 1:

  What should you do to change the data protocol of a LIF?

  A. Delete and re-recreate the LIF.

  B. Add the new data protocol to the LIF.

  C. Put the LIF in another broadcast domain.

  D. Shut down the assigned port.

  Correct Answer: A

  Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID-26EEBB35-4CA6-4814-B819-32DAB46F50E5.html

• Question 2:

  You are preparing for the installation of a new 2-node cluster with ONTAP 9.7 using NL-SAS drives. Your customer wants to use the cluster exclusively with FlexGroups. In this scenario, which two statements are correct? (Choose two.)

  A. All NL-SAS drives are assigned only to one of the nodes.

  B. A NAS protocol is licensed on both nodes.

  C. A SAN protocol is licensed on both nodes.

  D. All NL-SAS drives are divided evenly across both nodes.

  Correct Answer: BD

  Reference: https://www.netapp.com/media/12385-tr4571.pdf

• Question 3:

  You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.

  Which tool would you use to accomplish this task?

  A. Active IQ scheduled reports

  B. NetAppDocs output report

  C. ONTAP System Manager

  D. Active IQ Config Advisor worksheet

  Correct Answer: A

• Question 4:

  What is the default shelf ID for disk shelves with IOM12 modules?

  A. 12

  B. 01

  C. 10

  D. 00

  Correct Answer: D

  Reference: https://docs.netapp.com/platstor/index.jsp?topic=%2Fcom.netapp.doc.hw-ds-sas3-icg%2FGUID-F6882D15-2C68-40FC-AAA7-06B227B92377.html

• Question 5:

  After completing the installation of an AFF A800 ONTAP AI cluster, you are asked which contacts are available for additional help in obtaining immediate assistance in solving P1 issues. In this scenario, what do you tell the customer?

  A. Contact NetApp Support using chat.

  B. Use Guided Problem Solving.

  C. Contact NetApp Support by telephone.

  D. Use the NetApp KB TV channel.

  Correct Answer: C

• Question 6:

  A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data. In this scenario, which two capabilities are available to the storage administrator? (Choose two.)

  A. the ability to move the volumes from the old nodes to the new nodes

  B. the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s

  C. the ability to create a 4-node MetroCluster across the four nodes

  D. the ability to convert the FAS2520s to disk shelves and attach them to the new nodes

  Correct Answer: CD

• Question 7:

  You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.

  Which NetApp tool will verify which cluster interconnect switches support this configuration?

  A. Active IQ Config Advisor

  B. Interoperability Matrix Tool (IMT)

  C. Hardware Universe (HWU)

  D. mysupport.netapp.com site

  Correct Answer: C

  Reference: https://www.netapp.com/media/12424-tr4036.pdf

• Question 8:

  When you install a new ONTAP 9.7 4-node cluster, which network type is required?

  A. data network

  B. peering network

  C. cluster interconnect

  D. intercluster network

  Correct Answer: C

  Reference: https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-nmg/Network%20and%20LIF%20management.pdf

• Question 9:

  You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center. In this scenario, which cluster configuration is allowed with ASA controllers?

  A. Add the ASA controllers to an existing 4-node cluster with NAS licenses.

  B. ASA controllers can only be added to clusters that have existing SAN licenses.

  C. ASA controllers can only be installed as a standalone HA pair.

  D. Add the ASA controllers to an existing 10-node cluster.

  Correct Answer: B

• Question 10:

  You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.

  In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?

  A. BGP

  B. broadcast domains

  C. routing

  D. IPspaces

  Correct Answer: B

  Reference: https://www.netapp.com/media/16885-tr-4182.pdf (9)