NetApp NS0-163 Online Practice Questions and Exam Preparation

NetApp NS0-163 Online Questions & Answers

• Question 31:

  One method of configuring an interface for takeover is to enter ifconfig interface partner address at the command line. To make tins configuration persistent across reboots, you must enter tins information in the_____file for each appliance.

  A. /etc/hosts
  B. /etc/rc
  C. /voL'volO/home
  D. /vol/volO/mount
  B. /etc/rc

• Question 32:

  Which system is recommended as a secondary system for SnapVault?

  A. IS1200
  B. DataFort
  C. NearStore VTL
  D. FAS withNearStore license
  D. FAS withNearStore license

• Question 33:

  Which three are true when creating a SyncMirror volume? (Choose 3)

  A. The number of disks added must be an even number and equally divided between the twoplexes.
  B. The disks selected forPlex 0 and Plex 1 must come from the same disk pools.
  C. The number of disks selected for oneplex must equal the number of disks selected from the other plex.
  D. The disks are selected first on the basis of equivalent bytes per sector (bps) size, then on the basis of the size of the disk. If there is no equivalent-sized disk, Data ONTAP takes a larger capacity disk and downsizes it.
  A. The number of disks added must be an even number and equally divided between the twoplexes.
  C. The number of disks selected for oneplex must equal the number of disks selected from the other plex.
  D. The disks are selected first on the basis of equivalent bytes per sector (bps) size, then on the basis of the size of the disk. If there is no equivalent-sized disk, Data ONTAP takes a larger capacity disk and downsizes it.

• Question 34:

  Refer to the exhibit.

  

  An administrator has a NetApp AFF cluster with Cloud Tiering enabled on all data using the snapshot-only policy. When restoring files, users report slow response times.

  What is the highest latency seen during restore?

  A. 9591
  B. 10500
  C. 10021
  D. 7889
  B. 10500

• Question 35:

  You are trying to do a single file SnapRestore for a file, but you are receiving an error message that the directory structure no longer exists. Which one of the following is the most likely explanation?

  A. You must recreate the directory structure before trying to restore the file.
  B. Once the directory structure has been deleted, you cannot restore the file using single fileSnapRestore. You must now SnapRestore the volume.
  C. Snapshots have been created since the original directory structure was deleted.
  D. None of the above
  A. You must recreate the directory structure before trying to restore the file.

• Question 36:

  You have connected all cables and disk shelves in a Fabric Attached MetroCluster. Which one of the following commands would you use to verify that disks are connected and have dual paths?

  A. storage show disk-p
  B. sysconfig -v
  C. vol status -r
  D. disk show
  A. storage show disk-p

• Question 37:

  You have quiesced a volume to stabilize the contents of a destination just prior to a snapshot. What is the next logical command that you would issue after the snapshot is complete?

  A. snapmirror resume
  B. snapmirror quiesce-q
  C. options snapmirror.log enable off
  D. snapmirror restart
  A. snapmirror resume

• Question 38:

  Alter issuing the vol split volO/plexO volNew command:

  A. There are twounmirrored volumes, volO and volNew.
  B. There are two newplexes, plexO and plexNew.
  C. There is a new mirrored volume calledvolNew.
  D. There is a newplex called plexNew.
  A. There are twounmirrored volumes, volO and volNew.

• Question 39:

  The two copies of a SyncMirror volume are called_______. Each______is a physical copy of the same file system and consists of one or more RAID groups.

  A. plexes. plex
  B. volumes, volume
  C. qtrees. qtree
  D. snapshots, snapshot
  A. plexes. plex

• Question 40:

  An administrator is troubleshooting failed cluster peering between three ONTAP clusters for cascaded SnapMirror replication. Cluster1 is peered to Cluster2. Cluster2 is peered to Cluster3.

  Cluster1 and Cluster3 do not have an available route to reach each other. Cluster2 can route to both Cluster1 and Cluster3 using dedicated and separate intercluster LIFs.

  What ONTAP network component must be configured on Cluster2 to resolve this issue?

  A. Subnets
  B. IPspaces
  C. Failover groups
  D. Broadcast domains
  B. IPspaces