Nutanix NCM-MCI-5.15 Online Practice Questions and Exam Preparation

Nutanix NCM-MCI-5.15 Online Questions & Answers

• Question 61:

  An administrator receives an alert in Prism indicating that interface eth2, on an AHV host is receiving many CRC errors. After togging into the problematic host, the following command is run to show the indicated output:

  

  What is causing this issue?

  A. Incorrect link speeds on the switch
  B. The interface is incorrectly configured with Jumbo Frames
  C. A misconfigured bond
  D. A physical layer network problem
  B. The interface is incorrectly configured with Jumbo Frames

• Question 62:

  An administrator is managing multiple Windows and Linux VMs connected to Nutanix Volumes. The Linux VMs are experiencing intermittent connectivity issues. The Windows VMs do not experience the same issue. Which option should the administrator use to resolve this issue?

  A. Utilize Jumbo Frames
  B. Add additional disks to the Volume Group
  C. Set the SCSI timeout value to 60
  D. Utilize a separate subnet for the Linux VMs
  C. Set the SCSI timeout value to 60

• Question 63:

  A VM is exhibiting one or more of the following baseline values based on the past 30 days:

  CPU usage<; 20%

  CPU ready time<; 5%

  Memory usage<; 50% (moderately) or<; 20% (severely)

  Memory swap rate = 0 Kbps

  Which type of VM is being described?

  A. Constrained VM
  B. Inactive VM
  C. Bully VM
  D. Over-Provisioned VM
  D. Over-Provisioned VM

• Question 64:

  An administrator has a VM that consumes large amounts of storage and has the following characteristics:

  Create large / sequential writes

  Data must be kept for years

  Data is normally only accessed at the end of the year to run report

  The administrator decides to use Erasure Coding to save space.

  Which feature should the administrator utilize to save space for this VM?

  A. Inline Compression
  B. Flash Mode
  C. Cache Dedup
  D. Post-Process Compression
  D. Post-Process Compression

• Question 65:

  An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter. Which two steps should be taken to prepare for this task? (Choose two.)

  A. Stop all Nutanix Files clusters
  B. Relocate the linked LDAP servers
  C. Shut down all user VMs in the cluster
  D. Reconfigure IPMI for the new datacenter
  A. Stop all Nutanix Files clusters
  C. Shut down all user VMs in the cluster

• Question 66:

  A customer has a Nutanix cluster with 10Gb connectivity via switch fabric extenders. The administrator receives NCC health check errors of latency greater than 200ms. Which action should the administrator take to resolve the NCC errors?

  A. Replace the switch fabric extenders with 10G line rate switches
  B. Upgrade NCC and increase the CVM memory by 4Gb
  C. Add 2 additional 10G uplinks from the switch fabric extenders per node
  D. Upgrade NCC and increase the vCPU of the CVM
  A. Replace the switch fabric extenders with 10G line rate switches

• Question 67:

  The networking team makes changes to the Top of Rack switches to which the Nutanix cluster are attached. A few VMs are able to communicate with each other on the same node but are unable to connect to other parts of the network. What is the likely cause of this issue?

  A. There is a VLAN misconfiguration on the VMs.
  B. The vNIC port is disconnected on the affected VMs.
  C. There is a VLAN misconfiguration on the switch.
  D. Jumbo Frame are misconfigured across ports.
  C. There is a VLAN misconfiguration on the switch.

• Question 68:

  An administrator finds that home shares cannot be configured in a new Files 3.5 deployment. Why is this happening?

  A. NFS default access is set to Read Only.
  B. Multi-protocol access is not configured.
  C. Access Based Enumeration is not enabled.
  D. The system is deployed as a single FSVM.
  D. The system is deployed as a single FSVM.

• Question 69:

  An administrator wants to utilize Network Visualization to monitor the physical and logical network on the Nutanix cluster. The first-hop switch has LLDP enabled. The network switch information is still not being displayed. What is causing this problem?

  A. The ISL between switches is not configured.
  B. SNMP is not configured properly.
  C. br0 and br1 are not defined.
  D. The cluster is using RDMA-enabled NICs.
  B. SNMP is not configured properly.

• Question 70:

  A customer wants to run SAP HANA on a Nutanix cluster with the following characteristics:

  AHV nodes SAP HANA version 2 Production database files

  Which configuration should be recommended to the customer?

  A. Start with a cluster containing three or more nodes
  B. Enable only compression for the container that contains the Production database
  C. Do not enable compression, deduplication. or erasure coding on the storage container
  D. Plate the SAP HANA Database on the same socket as CVM
  C. Do not enable compression, deduplication. or erasure coding on the storage container