Nutanix Nutanix Certified Advanced Professional (NCAP) NCM-5.15 Questions & Answers

• Question 71:

  An administrator is planning to deploy a Nutanix cluster to support a few high-performance VMs. This deployment will have the following considerations: Individual VMs will likely generate network throughputs in the range of 90-100Mbps Due to the configuration of the VMs, it is unlikely that a node will host more than one or two of them at a time Individual VMs will communicate with only a few (one or two) remote hosts at a time Multicast will not be used in the environment The hosts are connected via two 1GbE network connections

  How should the administrator configure the network bonds to meet this requirement while maintaining the simplest switch configuration?

  A. Configure bond0 as balance-sib

  B. Configure bond0 as active-backup

  C. Configure bond0 as balance-tcp

  D. Configure bond0 as balance-lacp

  Correct Answer: A

• Question 72:

  Refer to the exhibit.

  

  User 1 and User 2 belong to the AAPM group.

  What are two descriptions of how Files perform quota management? (Choose two.)

  A. User 2 can continue to add another 3GB file but will receive a daily notification email.

  B. User 1 can continue to add another 5GB file but will receive a daily notification email.

  C. User 1 can add an 8GB file to the share without receiving notification.

  D. User 2 can add an 8GB file without receiving a notification email.

  Correct Answer: BD

• Question 73:

  An administrator is supporting a business critical environment and deploys metro availability to achieve a zero data loss configuration. The two clusters are connected by a 1GbE connection. A new workload is going to be deployed to this cluster. This workload requires a sustained 150MB/s of write throughput and 20MB/s of read throughput.

  Which change must be made to deploy the workload successfully on this cluster?

  A. The bandwidth must be increased to support this workload.

  B. The workload must be configured to read at greater than 12.5MB/s.

  C. The replication frequency must be less than 60 minutes.

  D. Zero data loss nearsync must be used to support this workload.

  Correct Answer: A

• Question 74:

  An administrator manages the following two Nutanix AOS 5.15 cluster environment: Corp-cluster-01 Corp-cluster-02

  The VM images must be available only on Corp-cluster-01, but cannot be checked out to cluster Corp-cluster-02. The images also cannot be checked out to any other clusters that are registered with Prism Central in the future.

  Which two configuration settings must the administrator choose when creating the image placement policy that satisfies the stated requirements? (Choose two.)

  A. Create an image placement policy that identifies cluster Corp-cluster-01 as the target cluster

  B. Set the policy enforcement to Soft.

  C. Set the policy enforcement to Hard.

  D. Create an image placement policy that identifies cluster Corp-cluster-02 as the target cluster.

  Correct Answer: AC

• Question 75:

  An administrator needs to create and start five new VMs for a Data Analytics Project (OLAP). The VM Profile is as follows: vCPU:4 vRAM: 64 GB vDisk: 1.5 TB

  Each of the four nodes of the Nutanix cluster has the following: 24 vCPU. 20% overall usage 192 GB RAM, 60% overall usage 2 x l920 GB SSD 4 x 2 TB HDD

  At cluster level, there is a single RF2 container that is 30% utilized and has an extent store capacity of 13.5 TB.

  Which component requires administrator attention?

  A. Physical RAM, because it is not enough to power on all of the new VMs.

  B. Physical Cores, because they are not enough to power on all of the new VMs.

  C. Storage, because the capacity is not enough to create VMs.

  D. Flash Tier because it is not enough to accommodate the workloads.

  Correct Answer: A

• Question 76:

  A customer recently set up Async Replication between Site A and Site B. The customer wants to conduct a planned failover and clicks Activate on Site B. The customer then runs the following command on Site A: ncli pd

  deactivate_and__destroy_vms name=.

  What does this do to the customer environment?

  A. VMs get deleted from Site B and the protection domain is now Active.

  B. VMs are powered off on Site A and must be manually powered on at Site B.

  C. VMs get deleted from Site A and the protection domain is no longer active.

  D. Customer must then manually power off VMs at Site A and power them on at Site B.

  Correct Answer: C

  

• Question 77:

  An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed. The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.

  What should the administrator do to meet the requirement?

  A. Disable the vNIC on the affected VM

  B. Quarantine the VM using the Forensic Method

  C. Create a firewall rule that blocks VM traffic but permits diagnostic access

  D. Create a security policy with a service chain directing that VMs traffic to the firewall

  Correct Answer: B

• Question 78:

  An administrator is responsible for the following Nutanix Enterprise Cloud environment: A central datacenter with a 20-node cluster with 1.5PB of storage Five remote sites each with a 4-node cluster with 200TB storage

  The remote sites are connected to the datacenter via 1GB links with an average latency of 6 ms RTT.

  What is the minimum RPO the administrator can achieve for this environment?

  A. 0 minutes

  B. 15 minutes

  C. 1 hour

  D. 6 hours

  Correct Answer: B

• Question 79:

  An administrator has a custom backup application that requires a 2TB disk and runs in Windows. Throughput is considerably lower than expected. The application was installed on a VM with the following configuration: Four vCPUs with one core/vCPU 4GB of Memory One 50GB vDisk for the Windows installation One 2TB vDisk for the application

  What is the recommended configuration change to improve throughput?

  A. Increase the number of cores per vCPU

  B. Increase the vCPUs assigned to the VM

  C. Span the 2TB disk across four vDisks

  D. Add 4GB of memory to the VM

  Correct Answer: C

• Question 80:

  In a Nutanix cluster, a Protection Domain contains 50 entities that are replicated to a remote Single Node Replication Target. The current schedule configuration is as follows: Repeat every 6 hours Local Retention Policy 1 Remote Retention Policy 8 Starting time 12 am

  At 8 am on Monday, the administrator discovers that a protected VM is corrupted. The latest good state was Sunday 2 pm. The administrator needs to maintain current protection.

  Which strategy should the administrator use to meet these requirements?

  A. From the Remote site, activate the Protection Domain, then re-protect the entity.

  B. From the Remote site, restore the VM from the local snapshot by selecting the correct snapshot.

  C. From the local site, retrieve the correct remote snapshot, then restore the VM locally.

  D. From the local site, restore the VM from the local snapshot by selecting the correct snapshot.

  Correct Answer: C