CompTIA N10-006 Online Practice Questions and Exam Preparation

CompTIA N10-006 Online Questions & Answers

• Question 701:

  A user is unable to connect to a remote computer using RDP. The technician checks the firewall rules and notes that there is no rule that blocks RDP. Which of the following features of the firewall is responsible for blocking RDP?

  A. Stateful inspection
  B. NAT/PAT
  C. Port security
  D. Implicit deny
  D. Implicit deny

• Question 702:

  An engineer has installed a new switch in the network. After configuring the new switch with a logical address, baseline configuration, and trunking to the other switches, the engineer starts receiving reports that users are unable to access any servers or the Internet. When of the following features enabled on the new switch caused this outage?

  A. 802.1q
  B. 802.1w
  C. VTP
  D. LACP
  B. 802.1w

• Question 703:

  203.50.5.0 is an example of which of the following network classes?

  A. Class A
  B. Class B
  C. Class C
  D. Class D
  C. Class C

• Question 704:

  Employees are unable to connect their laptops to network printers or access the Internet. The wireless access point is 49ft (15m) away from the offices in a hallway with direct line-of-sight to the employees' cubicles. The access point connects via a 394ft (120m) Cat 5 cable to the MDF. The IDF connects to the MDF via a 164ft (50m) multimode fiber cable. Which of the following should the technician do to enable wireless connectivity?

  A. Use single-mode fiber to connect to the cubicles.
  B. Reset the switches in the IDF.
  C. Move the access point cluster to the cubicles.
  D. Wire the access point to the DIF with a shorter cable.
  D. Wire the access point to the DIF with a shorter cable.

• Question 705:

  Which of the following cable types is unshielded?

  A. STP
  B. Twinax
  C. UTP
  D. Coax
  C. UTP

• Question 706:

  Which of the following protocols is MOST commonly used for the transfer of router configuration files?

  A. SSL
  B. TFTP
  C. DNS
  D. IMAP
  B. TFTP

  ---

  Trivial File Transfer Protocol (TFTP) is a file transfer protocol notable for its simplicity. It is generally used for automated transfer of configuration or boot files between machines in a local environment. Compared to FTP, TFTP is extremely limited, providing no authentication, and is rarely used interactively by a user.

• Question 707:

  After an upgrade of network equipment and applications, users are no longer able to access the Internet. Internal resources, such as file servers and databases, are accessible to the users. Which of the following is the MOST likely cause?

  A. The firewall is blocking outbound port 80 traffic.
  B. The web server was placed in the network's DMZ.
  C. The NetBIOS ports were left open on the firewall.
  D. The user PCs and the web server are both using IPv6.
  A. The firewall is blocking outbound port 80 traffic.

• Question 708:

  After the technician has established a theory of probable cause of a user reported problem, which of the following should the technician do NEXT in the troubleshooting process?

  A. Implement the solution to the problem.
  B. Establish a plan of action.
  C. Identify the problem.
  D. Implement preventative measures.
  B. Establish a plan of action.

• Question 709:

  A technician has configured a router to authenticate VPN users to an LDAP server on the network. In order to allow the authentication service, both UDP and TCP ports needed to be allowed on the router. Which of the following services was MOST likely used?

  A. Kerberos
  B. TACACS+
  C. RADIUS
  D. 802.1x
  C. RADIUS

• Question 710:

  A network technician has a RADIUS server IP address that must be included as part of the security settings for a WAP. Which of the following encryption types should the technician select?

  A. WPA enterprise
  B. TKIP
  C. WPA2 CCMP
  D. WEP 128-bit
  A. WPA enterprise