CompTIA N10-006 Online Practice Questions and Exam Preparation

CompTIA N10-006 Online Questions & Answers

• Question 691:

  A technician is looking at an issue with a computer connecting to the network. The technician determines wire 3 of a UTP Ethernet cable run has a break in it. This computer was previously connected to the switch at 1Gbps throughput. This PC is a kiosk and does not need anything more than 50-60Mbps connection speed. Which of the following can the technician do to resolve the issue quickly?

  A. Rewire both ends to have the wire on pin 6 remapped to pin 3. Force the duplex and speed to 100Mbps full duplex.
  B. Rewire both ends to have the wire on pin 6 remapped to pin 3. Force the duplex and speed to 1000Mbps full duplex.
  C. Rewire both ends to have the wire on pin 7 remapped to pin 3. Force the duplex and speed to 100Mbps full duplex.
  D. Rewire both ends to have the wire on pin 7 remapped to pin 3. Force the duplex and speed to 1000Mbps full duplex.
  D. Rewire both ends to have the wire on pin 7 remapped to pin 3. Force the duplex and speed to 1000Mbps full duplex.

  ---

  Explanation Explanation/Reference:http://pinouts.ru/NetworkCables/ethernet_10_100_1000_pinout.shtml

• Question 692:

  A new OC3 experiencing intermittent connectivity and loss of signal alarms. A network administrator finds all the cables are properly connected. There is excess cable between the patch panel and the network node. The cables were forced into their storage compartments about the rack. Which of the following is MOST likely cause of the connectivity issue and alarms?

  A. The OC2 was improperly provisioned.
  B. The cable was improperly crimped.
  C. The bend radius of the cable has been exceeded.
  D. The new OC3 cable is experiencing EMI.
  C. The bend radius of the cable has been exceeded.

• Question 693:

  In an engineering office, all plotters are configured via static IP. Which of the following best practices will alleviate many issues if equipment moves are required? (Select TWO).

  A. Rack monitoring
  B. Device placement
  C. Wall plate labeling
  D. Room numbering
  E. Patch panel labeling
  C. Wall plate labeling
  E. Patch panel labeling

  ---

  By labeling each wall plate (where the plotters' network cables plug in to) and the patch panel ports (where the cables connecting to each wall plate terminate), we'll be able to see which device is connected to which port. If equipment moves are required, we will be able to easily see which patch cables need to be moved in the patch panel.

• Question 694:

  A network has a large number of users who connect for short periods of time and the network needs to maximize the number of devices that can be configured using DHCP. Which of the following should be configured to solve this issue?

  A. Increase the number of reservations
  B. Increase exclude list
  C. Decrease lease times
  D. Decrease the scope
  C. Decrease lease times

• Question 695:

  A technician is sorting patch cables into four bins labeled coaxial, crossover, straight-through, and fiber. The technician has a cable with RJ-45 ends. The wires at one end of the cable start with an orange-white wire, while the wires at the other end of the cable start with a green wire. Into which of the following bins should this cable be placed?

  A. Crossover
  B. Fiber
  C. Straight-through
  D. Coaxial
  A. Crossover

• Question 696:

  Which of the following network monitoring resources would be used to analyze possible connectivity issues such as duplex mismatches and uptime statistics?

  A. Protocol analyzer
  B. Syslog server
  C. Packet sniffer
  D. IPS logs
  B. Syslog server

• Question 697:

  There has been an increase in Help Desk tickets related to web portal user accounts being locked out. Which of the following resources would be used to analyze the issue?

  A. Router logs
  B. Protocol analyzer
  C. Firewall logs
  D. Application logs
  D. Application logs

• Question 698:

  Which of the following devices can be used to offload outbound web server SSL encryption overhead?

  A. NIPS
  B. Proxy server
  C. Content filter
  D. VPN connectator
  B. Proxy server

• Question 699:

  Which of the following can be issued from the command line to find the layer 3 hops to a remote destination?

  A. traceroute
  B. nslookup
  C. ping
  D. netstat
  A. traceroute

• Question 700:

  Which of the following is true about an IP address if the first bit is a one and the second bit is a zero?

  A. The address is a Class A address.
  B. The address is a Class B address.
  C. The address is a Class C address.
  D. The address is a Class D address.
  B. The address is a Class B address.