MikroTik MTCNA Online Practice Questions and Exam Preparation

MikroTik MTCNA Online Questions & Answers

• Question 51:

  There are two wireless cards (wlan1 and wlan2) which are bridged together. On wlan1 card there is a setting "Forwarding=no". Choose the correct answer(s):

  A. Stations on wlan2 will be able to communicate with stations on wlan2
  B. Stations on wlan2 will be able to communicate with stations on wlan1
  C. Stations on wlan1 will be able to communicate with stations on wlan1
  D. To prevent communication between wlan1 and wlan2 one cannot use Bridge Filters
  E. Stations on wlan1 will be able to communicate with stations on wlan2
  D. To prevent communication between wlan1 and wlan2 one cannot use Bridge Filters

• Question 52:

  What is the minimal possible wireless configuration to create an Access Point?

  A. radio name
  B. scan-list
  C. frequency
  D. band
  E. ssid
  F. DFS mode
  G. WDS
  H. mode
  H. mode

• Question 53:

  In RouterOS queue configurations the word "total" ussually represents

  A. download
  B. upload + download
  C. download - upload
  D. upload
  B. upload + download

• Question 54:

  What is the meaning of letter "R" on an active session in the menu PPP Active Connections?

  A. Radius
  B. Running
  C. Remote
  A. Radius

• Question 55:

  What is possible with Netinstall?

  A. MikroTik RouterOS reinstall
  B. MikroTik RouterOS password reset with saving router's configuration
  C. MikroTik RouterOS configuration reset
  A. MikroTik RouterOS reinstall
  B. MikroTik RouterOS password reset with saving router's configuration
  C. MikroTik RouterOS configuration reset

• Question 56:

  When adding a static route, you must always ensure that you add both the gateway and the interface.

  A. False
  B. True
  A. False

• Question 57:

  Which of the following is used in standard 802.11 wireless networks?

  A. CSMA/CA
  B. CDMA
  C. FDD
  D. CSMA/CD
  A. CSMA/CA

• Question 58:

  It is required to make a web server on a private LAN visible on the Public Internet. Only the web server port should be visible to the public. Which of the following configuration steps must be met. (select all that apply)

  A. Public IP address of the webserver must be installed on the NAT Router
  B. in ip firewall NAT there should be a dst-nat between the public ip of the router and the private ip of the webserver
  C. Connection Tracking must be enabled on NAT router
  D. A route between the NAT Router and the webserver must exist
  E. LAN address of the webserver should be routable on the internet
  B. in ip firewall NAT there should be a dst-nat between the public ip of the router and the private ip of the webserver
  D. A route between the NAT Router and the webserver must exist

• Question 59:

  Router A and B are both running as PPPoE servers on different broadcast domains of your network. It is possible to set Router A to use "/ppp secret" accounts from Router B to authenticate PPPoE customers.

  A. true
  B. false
  B. false

• Question 60:

  Which option in the configuration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access list to connect?

  A. Security Profile
  B. Default Forward
  C. Enable Access List
  D. Default Authenticate
  C. Enable Access List