MikroTik MTCNA Online Practice Questions and Exam Preparation

MikroTik MTCNA Online Questions & Answers

• Question 171:

  Which of the following protocols / port s are used for SNMP. (Simple Network Managemnt Protocol)

  A. TCP 25
  B. TCP 161
  C. UDP 162
  D. TCP 162
  E. TCP 123
  F. UDP 161
  C. UDP 162
  F. UDP 161

• Question 172:

  For user in local PPP Secrets/PPP Profiles database, it is possible to

  A. Allow/deny use of more than one login by this user
  B. Allow login by PPPoE and PPTP, but deny login by L2TP
  C. Set max values for transferred data (Rx/Tx)
  D. Allow only PPPoE login
  E. Deny services (like telnet) only for this user or for one group of users
  A. Allow/deny use of more than one login by this user
  C. Set max values for transferred data (Rx/Tx)
  D. Allow only PPPoE login

• Question 173:

  Which of the following commands will allow you to set your Telnet password on a Cisco router?

  A. line telnet 0 4
  B. line aux 0 4
  C. line vty 0 4
  D. line con 0
  C. line vty 0 4

• Question 174:

  How many collision domains are created when you segment a network with a 12-port switch?

  A. 1
  B. 2
  C. 5
  D. 12
  D. 12

• Question 175:

  Which protocol does DHCP use at the Transport layer?

  A. IP
  B. TCP
  C. UDP
  D. ARP
  C. UDP

• Question 176:

  Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized, and you suspect it is a driver issue?

  A. Yes
  B. No
  B. No

• Question 177:

  Which of these are possible solutions to bridge two networks over a wireless link:

  A. Both devices in AP mode and enable WDS mode
  B. One device in AP mode, another one in station-pseudobridge-clone
  C. One device in AP mode, another one in station-pseudobridge
  D. One device in AP mode, another one in station
  A. Both devices in AP mode and enable WDS mode

• Question 178:

  If your router is facilitating a CSU/DSU, which of the following commands do you need to use to provide the router with a 64000bps serial link?

  A. RouterA(config)#bandwidth 64
  B. RouterA(config-if)#bandwidth 64000
  C. RouterA(config-if)#clock rate 64
  D. RouterA(config-if)#clock rate 64000
  D. RouterA(config-if)#clock rate 64000

• Question 179:

  What wireless card can we use to achieve 100 Mbps actual wireless throughput?

  A. 802.11 b/g
  B. 802.11 a/b/g
  C. 802.11 a
  D. 802.11 a/n
  E. 802.11 a/b/g/n
  A. 802.11 b/g

• Question 180:

  Select valid MACaddress

  A. G2:60:CF:21:99:H0
  B. 00:00:5E:80:EE:B0
  C. AEC8:21F1:AA44:54FF:1111:DDAE:0212:1201
  D. 192.168.0.0/16
  B. 00:00:5E:80:EE:B0