Microsoft MB6-703 Online Practice Questions and Exam Preparation

Microsoft MB6-703 Online Questions & Answers

• Question 41:

  You plan to report a bill of materials (BOM) as finished.

  You need to ensure that when you report the BOM as finished, the following occurs:

  

  Component items from the BOM are reported as finished.

  

  Component items from the sub-BOMs that are currently on-hand are reported as finished.

  What should you set?

  A. The Reservation field to Automatic
  B. The Explosion option to Always
  C. The Explosion option to Shortage
  D. The Reservation field to Explosion
  C. The Explosion option to Shortage

  ---

  The "explosion" parameter defines how AX will consume the on hand inventory of the components.

  *

  Shortage: Sub BOMs are only exploded if there is insufficient on hand inventory. If there is a partial quantity of the Sub BOM available, AX will only explode the component quantities of the Sub BOM, for the difference.

  *

  Never: The Sub BOM is never exploded if there is a component shortage

  *

  Always: The Sub BOM is always exploded, and any free on hand inventory of the Sub BOM is never consumed

• Question 42:

  Which three configuration technologies are supported on the product master definition? Each correct answer presents part of the solution.

  A. Dimension-based configuration
  B. Product attributes
  C. Constraint-based configuration
  D. Predefined variant
  E. Product variant
  A. Dimension-based configuration
  C. Constraint-based configuration
  D. Predefined variant

  ---

  *

  Dimension-based configuration

  Variants are configured by using the Configuration dimension when the variants are added to transaction lines.

  *

  Constraint-based configuration

  Variants are configured by using the Product configurator when the variants are added to transaction lines.

  *

  Predefined variant

  Variants are configured by using the product dimensions when the variants are created. Therefore, after you create the product master, you can assign product dimensions and create product variants.

• Question 43:

  You send a sales quotation to a customer named Contoso, Ltd.

  You have another customer named Lit ware, Inc.

  Lit ware has a trade agreement in place, which includes two of the items in the sales quotation that was sent to Contoso.

  You plan to copy the sales quotation to create a sales quotation for Lit ware.

  You need to ensure that the sales quotation for Lit ware adheres to the trade agreement you have with Lit ware. Which option should you select in the copy quotation function?

  A. Copy precisely
  B. Recalculate price
  C. Copy charges
  D. Delete quotation lines
  D. Delete quotation lines

  ---

  Copy project quotations [AX 2012]

  Use the following procedure to copy all or part of a project quotation.

  1.

  Click Project management and accounting > Common > Quotations > Project quotations.

  2.

  Select or open a project quotation.

  3.

  On the Action Pane, on the Project quotation tab or Quotation tab, in the Copy group, click From all.

  4.

  Under Setup, at the top of the Copy from all form, select one or more of the following options:

  Select the Copy precisely check box to copy all dimensions, sales tax, and ledger o accounts to the new project quotation. Delivery dates are not copied. Select the Delete quotation lines check box to delete any project quotation lines in the o

  new project quotation before you copy project quotation lines from this form. Select the Copy quotation header check box to copy information from the selected o

  project quotation to the new project quotation.

  Etc.

• Question 44:

  You need to configure Dynamics AX to support moving items from one site to another by using journals.

  Which module should you use?

  A. Product information management
  B. Transportation management
  C. Warehouse management
  D. Inventory management
  D. Inventory management

  ---

  Inventory management [AX 2012]

  You can use Inventory management for inbound and outbound operations, quality assurance, warehouse activities, and inventory control.

  From the Arrival overview form you can keep track of expected items and you can use arrival journals to register receipts. After items have arrived in the inbound dock, you can use pallet transports to guide the flow through the warehouse to

  the picking or the bulk location areas.

  Incorrect:

  Not C: Use Warehouse management to monitor and automate warehouse processes. The Warehouse management module for Microsoft Dynamics AX 2012 R3 lets you manage warehouse processes in manufacturing, distribution, and retail

  companies.

• Question 45:

  You need to create a new version of a bill of materials (BOM).

  Which three options can be used to create a new version of the BOM? Each correct answer presents part of the solution.

  A. Warehouse
  B. Dates
  C. Line type
  D. Quantities
  E. Site
  B. Dates
  C. Line type
  D. Quantities

  ---

  To create another version of the new BOM, click CTRL+N in the Versions grid to create a new line. Select the relevant item number, and enter dates in the From date and To date fields to control the validity period of the BOM version. Use the

  From qty. field to set a minimum item quantity for using the BOM version.

  Click Approve to approve the BOM version.

  Select the Active check box to make the BOM version active.

• Question 46:

  You need to report a bill of materials (BOM) as finished.

  Which three settings should you specify before you report the BOM as finished? Each correct answer presents part of the solution.

  A. Subcomponents
  B. BOM number
  C. Date
  D. Quantity
  E. Storage dimensions
  B. BOM number
  C. Date
  D. Quantity

  ---

  A bill of material (BOM) can be reported as finished when no further changes are necessary and when you want to post the inventory transactions.

  At a minimum, enter information in the following fields: BOM number Date Quantity Item number Any applicable Configuration

• Question 47:

  You have a bill of materials (BOM) item.

  Ten percent of one of the BOM components is wasted during the manufacturing process.

  You need to ensure that the cost calculation for the BOM item is accurate.

  What should you do?

  A. Set the Variable scrap field on the component BOM line to 10.
  B. Set the Constant scrap field on the component BOM line to 10.
  C. Set the Consumption is field on the component BOM line to variable.
  D. Set the Consumption is field on the component BOM line to constant.
  B. Set the Constant scrap field on the component BOM line to 10.

  ---

  Specify constant scrap when you know, or have calculated, that a quantity of bill of materials (BOM) items will be lost or rejected during production. For example, you can apply constant scrap to the setup of a machine if you know that material will be always be wasted before a usable product is produced.

• Question 48:

  You have several bills of materials (BOMs) that include an item manufactured by a third party.

  The third party plans to discontinue the production of the item. You need to locate all of the BOMs that include the item.

  Which report should you use?

  A. Order lines
  B. Where-used
  C. Calculation
  D. On-hand inventory
  A. Order lines

  ---

  Order lines report (SalesLinesExtended) [AX 2012]

  You can use the Order lines report to print sales order lines and basic information for each sales order line such as item number, sales price, and discount.

  Incorrect:

  Not B: Row structure where-used report (LedgerRowStructureWhereUsed) [AX 2012] This report displays the details of row definitions and financial statements that are used in the selected row definition.

  Not C: BOM calculation results (form) [AX 2012]

  Use this form to view the results of an item's order-specific bill of material (BOM) calculations and as a starting point to perform additional order-specific BOM calculations. An order-specific BOM calculation can be performed for a line item on

  a sales order, sales quotation or service order. Each order-specific BOM calculation creates a calculation record that is uniquely identified by a calculation number.

  Not D: Critical on-hand inventory report (InventSumCritical) [AX 2012] You can use the On-hand inventory report to print on-hand inventory according to quantity. The quantity is based on the on-hand inventory and the product, tracking, and storage dimensions. Select which product, tracking, and storage dimensions you want to include in the report.

• Question 49:

  You create a new purchase order and add a line that has a product, quantity, and unit price. You need to send the purchase order to the vendor.

  What should you generate?

  A. A receipts list
  B. A product receipt
  C. A pro forma receipts list
  D. A confirmation
  B. A product receipt

  ---

  Confirm the receipt of products [AX 2012]

  When you order a product such as a new office desk, and the purchase is then confirmed, a product receipt that has not yet been confirmed becomes available on the Unconfirmed product receipts page on Enterprise Portal for Microsoft

  Dynamics AX. The product receipt indicates the expected date of delivery of the ordered product. When the product arrives, you must confirm the receipt of the product. You need to do this to indicate that you accept the delivery. You do this

  on the Unconfirmed product receipts page.

  1.

  Click Procurement on the top link bar, and then click Unconfirmed product receipts on the Quick Launch.

  2.

  Select the product receipt that you want to confirm. On the Action Pane, on the Confirmation of product receipt tab, in the Update group, click Receive.

  3.

  Approve or change the received quantity, and then click the Close line check box if you want to close the purchase order line.

  4.

  Click Save and close to save the changes, if any, and return to the Unconfirmed product receipts page. The product receipt that you have just confirmed is no longer visible in the list.

• Question 50:

  You create a new product change case for an item.

  You need to add associations to the product change case.

  Which types of associations can you add to the product change case?

  A. Only bills of materials (BOMs) and routes
  B. All association types
  C. Only bills of materials (BOMs) and formulas
  D. Only formulas and items
  B. All association types

  ---

  A new type of case became available in Ax 2012 R2 CU7. The Product change case / Product change case for the product / Product change case for the released product / Product change case for the BOM / Product change case for the BOM-line / Product change case for the Routing / Product change case for the routing operation

  * What can I associate with a product change case? You can assign all of the entities that case management is designed for. However, product change cases are intended for use with the following entities: Products and released products Formulas Routes