Microsoft MB-330 Online Practice Questions and Exam Preparation

Microsoft MB-330 Online Questions & Answers

• Question 31:

  You need to complete the shipments.

  A. Confirm the load and generate packing slips and bills of lading.
  B. Create waves to generate work for shipping loads and send an ASN.
  C. Confirm shipments and generate pick/put work.
  D. Create work for printing shipping documents and send an ASN.
  B. Create waves to generate work for shipping loads and send an ASN.

  ---

  Explanation

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/warehousing/wave-processing

• Question 32:

  DRAG DROP

  A company is implementing Dynamics 365 Supply Chain Management.

  The company has vendor agreements with domestic and international companies.

  A production controller requires the ability to process the goods in transit to the company from international vendors. Charges and costs require the following setup:

  1. applied to domestic and international inbound shipments

  2. separate purchase orders

  The company will not create inbound Wads automatically

  Youneed to determine which module to configure to meet the requirement for inbound shipments.

  Which module should you use? To answer, drag the appropriate modules to the correct requirements. Each module may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  NOTE Each correct selection is worth one point.

  Select and Place:

  

  

• Question 33:

  You are the warehouse manager at a distribution center.

  In the warehouse, items must be moved to a staging location before moving to the baydoor location for shipping.

  You need to set up a work template that accomplishes this pick/put scenario.

  Which two actions should you perform? Each correct answer presents part of the solution.

  NOTE: Each correct selection is worth one point.

  A. Create one work class ID with valid location types of staging and baydoor. Assign these to the work template details.
  B. Create two work templates: one is a pick/put from inventory to staging and the other is from staging to baydoor.
  C. Create a sales order work template with two pick/put pairs: one to staging and the second to baydoor.
  D. Create two work class IDs: one with valid put location types of staging and the other of baydoor. Assignthese to the appropriate put work types on the work template.
  B. Create two work templates: one is a pick/put from inventory to staging and the other is from staging to baydoor.
  D. Create two work class IDs: one with valid put location types of staging and the other of baydoor. Assignthese to the appropriate put work types on the work template.

  ---

  Explanation

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/warehousing/control-warehouse-locationdirectives

• Question 34:

  A distribution company uses Dynamics 365 Supply Chain Management.

  The company implements a new safety policy. The policy dictates that all business units must undergo a rapid routine safety checkup every week.

  To follow the new policy, the warehouse manager must ensure the following:

  1. The business unit must be unavailable for use during that period.

  2. The maintenance activities must be conducted during the lunch break to avoid production downtime losses.

  You must configure the system to meet the safety requirements.

  Which two configurations should you complete? Each correct answer presents a part of the solution.

  NOTE: Each correct selection is worth one point.

  A. Work order service levels
  B. Maintenance request lifecycle models
  C. Asset BOMs
  D. Work order types
  E. Attributes
  A. Work order service levels
  D. Work order types

• Question 35:

  HOTSPOT

  Employed needs to schedule deliveries.

  How should Employee? plan for a carrier to deliver goods to Store2? To answer, select the appropriate options In the answer area.

  NOTE: Each correct selection is worth one point.

  

  

  ---

  1. Select All loads, Outbound, Status 2. Select Site, Warehouse, Shipping carrier, Allow customer pick up

• Question 36:

  An employee at a company needs to lay out the various component builds for bicycles.

  You need to identify which constraints the employee should use to set up the bicycles.

  Which two types of constraints achieve the goal? Each correct answer presents a complete solution.

  NOTE: Each correct selection is worth one point.

  A. table constraints that are used generically among product configuration models
  B. expression constraints that are used generically among product configuration models
  C. expression constraints that are unique to each product configuration model
  D. table constraints that are always unique to each product configuration model
  A. table constraints that are used generically among product configuration models
  C. expression constraints that are unique to each product configuration model

• Question 37:

  DRAG DROP

  An energy sustainability company uses Dynamics 365 Supply Chain Management.

  The company sells raw materials to contractors working on a pipeline project by using special pricing. The company plans to sell raw materials to non-pipeline contractors; however, those sales will not be eligible for the special pricing, any discounts, or price breaks. The non-pipeline contractor pricing may change over time. The price history must be retained.

  You need to configure the system for the pricing requirements.

  What should you configure? To answer, drag the appropriate configurations to the correct pricings. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  NOTE: Each correct selection is worth one point.

  Select and Place:

  

  

  ---

  Box 1: price group, affiliations

  Price groups are at the heart of price and discount management in Commerce. Price groups are used to assign prices and discounts to Commerce entities (that is, channels, catalogs, affiliations, and loyalty programs). Because price groups are used for all pricing and discounts, it's very important that you plan how you will use them before you start. If you want to apply customer-specific prices, we recommend that you not set price groups directly on the customer. Instead, you should use affiliations.

  Box 2: trade agreement, customer

  Trade agreements are fixed price or discount agreements that are set up for one or more customers or vendors for the sale or purchase of single or multiple products.

  Trade agreements can apply to the following:

  A specific customer, a vendor, or a product Groups of customers, vendors, or items All customers, all vendors, or all items

• Question 38:

  A caulking manufacturer is implementing Dynamics 365 Supply Chain Management. When caulking is produced, it is sold by tubes, 1-gallon cans, 5-gallon buckets, 55-gallon drums, or 330-gallon totes with potential to add other sizes.

  The manufacturer wants to ensure that when new units are added, only one conversion is set up that does not require conversions between each unit of measure.

  You need to configure the unit of measure to meet the requirement.

  What should you use?

  A. Unit class
  B. Conversion formula
  C. Formula layout
  D. Base unit
  D. Base unit

  ---

  Explanation

  Helpful in unit conversions without need to define all conversions to and from with this unit and other units in same unit class.

  Base unit

  Set this option to Yes to use the current unit as the base unit for its unit class. In this case, you only have to specify the conversion factor between the base unit and each additional unit in the unit class. The system can then convert between all units in that unit class. Therefore, it's easier to set up conversions.

  For example, if gallon is the base unit for the Volume unit class, you only have to set up conversion factors from quart to gallon and from pint to gallon. The system can then also convert from quart to pint.

  You can have only one base unit per unit class.

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/tasks/manage-unit-measure

• Question 39:

  HOTSPOT

  A primary vendor tells you that their purchase order (PO) items will be delivered seven days later than expected. You find another vendor that carries the product and can deliver it the next day.

  You need the purchases from both vendors, but only one PO exists in the system.

  You need to ensure that the system correctly reflects the inbound products from both vendors.

  How should you complete the setup? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 40:

  A vendor is offering a rebate program on bottles of wine that have purchase orders placed within a month. There is a V5.00 rebate on the purchase of 10-100 bottles and a $6.00 rebate for the purchase of 101-200 bottles. Customers can purchase wine by the bottle or by the case. Discounts apply to all varieties of wine sold by the vendor.

  You need to create a vendor rebate agreement to ensure that the correct rebate amount is claimed at the end of the month,

  Solution: On the rebate agreement, in the unit of measure rebate option, select exact match.

  Does the solution meet the goal?

  A. Yes
  B. No
  B. No