Juniper JN0-102 Online Practice Questions and Exam Preparation

Juniper JN0-102 Online Questions & Answers

• Question 411:

  Which command displays the egress interfaces selected on the PFE for destination prefixes?

  A. show route forwarding-table
  B. show route table
  C. show route table extensive
  D. show pfefwdd
  A. show route forwarding-table

• Question 412:

  You must apply the family inet configuration parameter only to Gigabit Ethernet interfaces that are in FPC 2. Which output applies to this configuration?

  A. [edit groups]user@router# showge-int {interfaces { {unit 0 {family inet;}}}}
  B. [edit groups]user@router# showge-int {interfaces { {unit 0 {family inet;}}}}
  C. [edit groups]user@router# showge-int {interfaces { {unit 0 {family inet;}}}}
  D. [edit groups]user@router# showge-int {interfaces { {unit 0 {family inet;}}}}
  D. [edit groups]user@router# showge-int {interfaces { {unit 0 {family inet;}}}}

• Question 413:

  Which command do you use to go from the shell prompt to the CLI prompt?

  A. run cli
  B. cli
  C. start cli
  D. edit
  B. cli

• Question 414:

  What represents the binary equivalence of 148?

  A. 10010110
  B. 11010010
  C. 10011100
  D. 10010100
  D. 10010100

• Question 415:

  Click the Exhibit button.

  

  Referring to the exhibit, which next-hop interface will be used to reach the 10.21.14.16 destination?

  A. ge-0/0/3.0
  B. ge-0/0/0.0
  C. ge-0/0/2.0
  D. ge-0/0/1.0
  D. ge-0/0/1.0

• Question 416:

  When is the BA Classifier engaged for identifying the forwarding class of traffic in a Juniper router?

  A. after a packet is identified by a multifield classifier
  B. after the traffic passes though a shaper
  C. prior to ingress policing of traffic
  D. while the packet is stored in the switching fabric of the router
  C. prior to ingress policing of traffic

• Question 417:

  Which three commands will cause a logical interface to go administratively down after being committed? (Choose three.)

  A. shutdown
  B. deactivate
  C. disable
  D. down
  E. delete
  B. deactivate
  C. disable
  E. delete

• Question 418:

  Which class-of-service component allows you to define the bandwidth allocated to different traffic types?

  A. classification
  B. rewrite marking
  C. scheduling
  D. queuing
  C. scheduling

• Question 419:

  How do you save the current candidate configuration in the set format to permanent storage media?

  A. [edit]user@router# show | set | save /var/tmp/current.conf
  B. [edit]user@router# show | compare set | save /var/tmp/current.conf
  C. [edit]user@router# save /var/tmp/current.conf | display set
  D. [edit]user@router# show | display set | save /var/tmp/current.conf
  D. [edit]user@router# show | display set | save /var/tmp/current.conf