What represents the binary equivalence of 96?
A. 11010100Which command do you use to show active alarms?
A. show hardware stateWhich statement is correct about the forwarding table?
A. The forwarding table is stored only on the PFE.What are two reasons why a route might be hidden? (Choose two.)
A. route preference-- Exhibit -user@router> show configuration firewall
familyinet {
filter demo {
term example {
from {
source-address {
100.100.100.0/24;
}
destination-address {
200.200.200.0/24;
}
}
then {
reject;
}
}
term testing {
from {
source-address {
10.10.10.0/28;
}
destination-address {
200.200.200.0/24;
}
}
then sample;
}
term results {
from {
address {
200.200.200.0/24;
}
}
then accept;
}
term final {
then policer LAPD;
}
}
}
-- Exhibit -Given the configuration shown in the exhibit, what will happen to traffic from source 10.10.10.25 destined to 200.200.200.1?
A. The traffic will be rejected.Which statement is true regarding the Network Time Protocol (NTP) on Junos devices?
A. MD5 authentication is supported by the Junos OS.-- Exhibit -user@router> show configuration
groups {
ge-int {
interfaces {
unit 0 {
family inet {
address 10.10.12.1/24;
}
}
}
}
}
}
...
interfaces {
ge-0/0/1 {
unit 0;
}
-- Exhibit -Referring to the exhibit, which two actions would you take to only apply the 10.10.12.1/24 address to the ge-0/0/1.0 interface?
A. Apply the ge-int group to the configuration at the [edit] hierarchy.Which set of IP addresses are in the same subnet?
A. 185.114.16.59/28 and 185.114.16.64/28You are asked to change the cable on interface ge-2/1/3. Which statement is correct?
A. The cable is found on FPC 1, slot 3, and port 2.-- Exhibit -user@router> show route inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both 10.10.10.91/32 *[Direct/0] 00:09:40 >via lo0.0 10.10.10.92/32 *[OSPF/10] 00:01:50, metric 1 >to 172.16.1.2 via ge-0/0/2.0 100.100.1.0/24 *[Static/5] 00:01:50 Reject 172.16.1.0/24 *[Direct/0] 00:06:09 >via ge-0/0/2.0 172.16.1.1/32 *[Local/0] 00:06:09 Local via ge-0/0/2.0 192.168.0.0/16 *[Aggregate/130] 00:00:06 Reject 192.168.0.0/17 *[Aggregate/130] 00:00:06 >to 172.16.1.2 via ge-0/0/2.0
192.168.50.0/24 *[Static/5] 00:00:06 >to 172.16.1.2 via ge-0/0/2.0 192.168.51.0/24 *[Static/5] 00:00:06 >to 172.16.1.2 via ge-0/0/2.0 user@router> show configuration policy-options policy-statement demo { term 1 { from { protocol aggregate; route-filter 192.168.0.0/16 longer; } then accept; } } user@router> show configuration protocols ospf export demo; area 0.0.0.0 { interface ge-0/0/2.0; } -- Exhibit -Given the configuration and routing table shown in the exhibit, which routes will be advertised to OSPF neighbors because of the demo policy?
A. 192.168.0.0/16 onlyNowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Juniper exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your JN0-102 exam preparations and Juniper certification application, do not hesitate to visit our Vcedump.com to find your solutions here.