CompTIA ISS-003 Online Practice Questions and Exam Preparation

CompTIA ISS-003 Online Questions & Answers

• Question 111:

  During a training event that you are giving as an Intel® Server Specialist on the use of RAID in protecting customer data from loss, you are asked to explain how a RAID array can be configured without using the operating system. How would you answer this question from the list below? (Select ALL that apply).

  A. You can use the System Configuration Utility in UEFI
  B. You can use the RAID BIOS
  C. You can use the RAID web console
  D. You can use SysInfo in UEFI
  E. You can use the CmdTool2
  B. You can use the RAID BIOS
  E. You can use the CmdTool2

• Question 112:

  Your customer wishes to consolidate a number of their current servers in their business, so virtualization will be required. In addition they have asked for information on the cloud; so you will need to specify a system (as their Intel Server Specialist) which will accommodate this eventuality; and give advice on the type of cloud they should go for, as well as configure a server that can handle this level of abstraction. They currently have 7 servers to be consolidated along with their switched infrastructure. Your first task will be to suggest the best server platform. Which of the following will you suggest, given the requirement for the highest number of add-in cards in the server?

  A. Intel Server Board HNS2600KP
  B. Intel Server System R2224WTTYS
  C. Intel Server Board S2600CWT
  D. Intel Server Board S1200V3RP
  E. Intel Server System R1208GZ4GSN
  B. Intel Server System R2224WTTYS

• Question 113:

  Your customer is buying a new server and due to space constraints it needs to enable maximum storage as well. The minimum acceptable number of drives is at least 20 HDDs so that secure arrays may be created. Please choose your answer from the list below:

  A. Intel Compute Module HNS2600TPand; Intel Server Chassis H2216XXKR2
  B. Intel Server System R1304WTXXX
  C. Intel Server System R2224WTTYS
  D. Intel Server System R1208WTXXX
  C. Intel Server System R2224WTTYS

• Question 114:

  Your customer has enabled BMC management and remote access in the event that they need you the Intel Server Specialist to perform remote reporting or diagnostics. They want to know if chassis status lights and buttons are available via the Embedded Web Server, and if so which ones. (Select ALL that apply).

  A. Only power and reset buttons are available
  B. Only the power and status LEDs are visible via the EWS
  C. Only the power LED is visible through the EWS
  D. The power, chassis id and status LEDs are available
  E. Power, reset and chassis id buttons are available
  F. Only the chassis id is available through the EWS
  D. The power, chassis id and status LEDs are available
  E. Power, reset and chassis id buttons are available

• Question 115:

  Your customer is looking for new servers. Space is very limited; they have room for one new rack and want to add at least 30 servers. The servers need to be able to support E5-2600 v3 14 core processors, 768GB memory and 8 HDDs. Which of the following configurations would you recommend?

  A. HNS2600TP and H2216XXKR2.
  B. R2208WT2YS.
  C. R1208WTXXX.
  D. R1304WTXXX.
  C. R1208WTXXX.

• Question 116:

  Your customer is in the market to upgrade their HPC infrastructure. Therefore integrated InfiniBand is seen to be a base essential and must be down on the board. Please advise your customer as to which systems could answer their needs from the list below:

  A. Intel® Compute Module HNS2600KP
  B. Intel® Compute Module HNS2600TP
  C. Intel® Server System R1208WTTGS
  D. Intel® Compute Module HNS2600TPF
  E. Intel® Server System R2208WTTYC1
  D. Intel® Compute Module HNS2600TPF

• Question 117:

  During a RAID "Deep-Dive" training event that you have organized as the Intel Server Specialist, you have been asked how to increase the speed of HWRAID. How would you answer that question from the following list? (Select ALL that apply).

  A. "Write Through" should be enabled.
  B. The battery should be removed.
  C. "No Read Ahead" should be enabled.
  D. "Always Read Ahead" should be enabled.
  E. "Always Write Back" should be enabled.
  D. "Always Read Ahead" should be enabled.
  E. "Always Write Back" should be enabled.

• Question 118:

  A customer has asked you to specify a server system that has a high degree of fault tolerance. Which of the following would satisfy that criteria?

  A. DC power supply
  B. Redundant power supply
  C. High efficiency power supply
  D. AC power supply
  B. Redundant power supply

• Question 119:

  Below is a step in the server management configuration process. Which of the following is true about this command?

  

  A. This SYSCFG command, Reset Factory Settings, can be used to erase all BMC management settings. This command can be used to reset the management settings to support reconfiguration of management, without carrying over previous management settings.
  B. This SYSCFG command, Restore File System, is used to restore a backup of the server management settings. This is an efficient method of restoring the BMC settings if they have been lost or deleted.
  C. This DOS command allows a super user to replace the file system within the BMC, reformatting the data area down to a low-level format prior to a system restore.
  D. This SYSCFG command, Refreshes Sensors, resets the sensor values and forces the BMC to rescan all sensors to update the Sensor Data Records (SDR). This is used when a system error has been resolved, but the status remains critical in the SDR.
  A. This SYSCFG command, Reset Factory Settings, can be used to erase all BMC management settings. This command can be used to reset the management settings to support reconfiguration of management, without carrying over previous management settings.

• Question 120:

  Does the number of hard drives in a given array determine the RAID levels that can be supported?

  A. No
  B. Yes
  B. Yes