HP HPE6-A73 Online Practice Questions and Exam Preparation

HP HPE6-A73 Online Questions & Answers

• Question 51:

  How is NetEdit installed at a customer location?

  A. Via an Aruba NetEdit hardware appliance
  B. Via a DVD using a virtualized platform like Microsoft's Hyper-V
  C. Via the Aruba Central cloud solution
  D. Via an OVA file and a virtualized platform like VMware's ESXi
  D. Via an OVA file and a virtualized platform like VMware's ESXi

• Question 52:

  A network administrator is tasked to set up BGP in the company's network. The administrator is defining an eBGP peering between an AOS-CX switch and a directly- connected service provider. The administrator has configured the following on the AOS-CX switch:

  

  However, when using the "show bgp all summary" command, the state does not display "Established" for the eBGP peer. What must the administrator configure to fix this issue?

  A. router bgp 64500 neighbor 192.168.1.1 ebgp-multihop
  B. router bgp 64500 enable
  C. router bgp 64500 address-family ipv4 unicast neighbor 192.168.1.1 activate
  D. router bgp 64500 neighbor 192.168.1.1 update-source loopback0
  C. router bgp 64500 address-family ipv4 unicast neighbor 192.168.1.1 activate

• Question 53:

  Examine the network exhibit.

  

  A network administrator is implementing OSPF on a VSX pair of aggregation switches:

  Agg1 and Agg2. VLANs 10 and 20 are connected to layer-2 access switches. Agg-1 and Agg-2 are configured as the default gateway for VLANs 10 and 20, with active gateway enabled.

  What is the best practice for configuring OSPF on the aggregation switches and their connection to the Core switch?

  A. Define a layer-2 VSX LAG associated with a layer-3 VLAN interface. Enable active gateway for the Layer-3 VLAN.
  B. Define separate layer-3 VLAN interfaces between the aggregation and core switches. Enable active forwarding for the Layer-3 VLAN.
  C. Define separate layer-3 VLAN interfaces between the aggregation and core switches. Enable active gateway for the Layer-3 VLAN.
  D. Define a layer-2 VSX LAG associated with a layer-3 VLAN interface. Enable active forwarding for the Layer-3 VLAN.
  A. Define a layer-2 VSX LAG associated with a layer-3 VLAN interface. Enable active gateway for the Layer-3 VLAN.

• Question 54:

  Examine the AOS-CX configuration: The switches have a default factory password setting NetEdit fails to access the configuration of the AOS-CX switches. What should the administrator do to solve this problem?

  

  A. Set a password for the default admin user account.
  B. Disable telnet globally.
  C. Use the default VRF instead of the mgmt VRF
  D. Enable IP routing globally
  D. Enable IP routing globally

• Question 55:

  An administrator is implementing a downloadable user role solution involving AOS-CX switches. The AAA solution and the AOS-CX switches can successfully authenticate users; however, the role information fails to download to the switches. What policy should be added to an intermediate firewall to allow the downloadable role function to succeed?

  A. Allow TCP 443
  B. Allow UDP 1811
  C. Allow UDP 8211
  D. Allow TCP 22
  A. Allow TCP 443

• Question 56:

  An administrator is configuring BGP and has two connections to a service provider to two different local routers.

  Which BGP metric should the administrator configure to influence which local router the service provider will use to reach certain routes?

  A. Weight
  B. Multiple exit discriminator
  C. Local preference
  D. Origin
  C. Local preference

• Question 57:

  What is the correct way of associating a VRF instance to either a VLAN or an interface?

  A. Switch(config)# interface Switch(config-if)# vlan access vrf attach
  B. Switch(config)# vlan vrf attach < vrf-name >
  C. Switch(config)# vlan Switch(config-vlan-# vrf attach < vrf-name >
  D. Switch(config)# vlan vrf < vrf-name >
  C. Switch(config)# vlan Switch(config-vlan-# vrf attach < vrf-name >

• Question 58:

  A network has an ABR that connects area 0 and 1. A network engineer configures a summarized route for area 0. The ABR is a designated router (DR) for the segment it uses to connect to area 1. Which LSA type is assigned to this route when the summarized route is advertised into area 1 by the ABR?

  A. LSA1
  B. LSA4
  C. LSA3
  D. LSA2
  B. LSA4

• Question 59:

  An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS- CX switch output:

  

  Based on this output, what is the state of the user's access?

  A. No downloadable user role exists
  B. MAC authentication has passed, but 802.1X authentication is in progress
  C. The RADIUS request timed out to the AAA server
  D. The port should be configured for 802.1X
  A. No downloadable user role exists

• Question 60:

  Examine the commands entered on an AOS-CX switch:

  What is true regarding this configuration for traffic received on interface 100?

  A. The default next-hop address supersedes the two preceding next-hop addresses
  B. The traffic is always dropped is the next-hop addresses are unreachable
  C. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable
  D. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2
  C. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable