HP HPE6-A71 Online Practice Questions and Exam Preparation

HP HPE6-A71 Online Questions & Answers

• Question 141:

  An AP connects to a controller. Then, the AP loses power and reboots.

  Which parameters will the AP remember and use from its initial connection? (Select two.)

  A. AP group
  B. Server IP
  C. AP IP address and subnet mask
  D. Mobility Master IP
  E. AirWave server name
  A. AP group
  B. Server IP

• Question 142:

  An administrator wants to implement the MultiZone feature in a company's network to segregate corporate and guest traffic. Corporate traffic will have APs establish connections to a cluster managed by a Mobility Master (MM), and guest traffic will have the same APs establish connections to a standalone controller at the company's DMZ.

  Given this scenario, what is true about the implementation of Multizone?

  A. A management session is established only with the primary zone, but data sessions are established to all zones.
  B. Only the primary zones can reboot, upgrade, or provision MultiZone APs.
  C. The primary and data zones must be in the same L2 subnet.
  D. A MultiZone AP can initially connect to any zone to obtain its configuration.
  B. Only the primary zones can reboot, upgrade, or provision MultiZone APs.

• Question 143:

  Which two protocols does AirWave use to monitor Aruba Mobility Controllers ()?

  A. PAPI and AMON
  B. SNMP and AMON
  C. PAPI and GRE
  D. SNMP and SSH
  B. SNMP and AMON

• Question 144:

  An administrator needs to implement multiple configuration changes on a set of Aruba Mobility Controllers (MCs) that involve both VLAN and interface configurations at the same time. The controllers are deployed in a cluster.

  How can the administrator accomplish this task?

  A. Apply pending changes, and schedule the changes to occur at a similar time.
  B. Create a template and deploy the changes by use of the bulk configuration update feature.
  C. Use AirWave to deploy the changes to respective controllers in the cluster.
  D. Use the Live Update (in-service update) feature for a cluster of controllers.
  B. Create a template and deploy the changes by use of the bulk configuration update feature.

• Question 145:

  A Microsoft RADIUS server is used to centralize AAA functions by a company. Upon a successful authentication lookup performed by an Aruba Mobility Controller (MC), the administrator wants to have the RADIUS server pass back the correct post-authentication role name that the controller should apply to the user's traffic.

  Which additional task must the administrator perform for the controller's configuration to implement this process?

  A. Install ClearPass's VSA file on the controller.
  B. Install Microsoft's VSA file on the controller.
  C. Configure the server-derived rules on the controller.
  D. Enable AAA on the controller.
  C. Configure the server-derived rules on the controller.

• Question 146:

  An administrator stages an AP and re-provisions it as a RAP from the Mobility Master (MM). When re-provisioning the RAP, the administrator must enter a user's credentials. What is the purpose of these credentials?

  A. to authenticate users on wired and wireless ports
  B. to authenticate the RAP device
  C. to authenticate users on wireless ports
  D. to authenticate users on wired ports
  B. to authenticate the RAP device

• Question 147:

  An administrator configures a network scan set in AirWare to scan a subnet to discover new switches. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access. However, SSH access fails and the administrator must manually configure the SSH credentials used for all of these devices.

  To prevent this problem in the future, what should the administrator complete prior to running the network scan?

  A. Define the SSH communication parameters under the Group's Manage section.
  B. Define a scan credentials set that includes the SSH communication parameters.
  C. Define the SSH communication parameters under the AP/Device's Manage section.
  D. Define the SSH communication parameters for the Default Credentials under Device Setup section.
  D. Define the SSH communication parameters for the Default Credentials under Device Setup section.

• Question 148:

  Refer to the exhibit.

  

  An administrator wants to centralize administrative access to the Aruba Mobility Controllers (MC) and Mobility Master (MM). ClearPass is set up and the preferred authentication protocols is TACACS+. Where should the administrator perform this configuration in the MM hierarchy shown in the exhibit?

  A. At the Managed Network level
  B. At the two campus levels
  C. At both the Mobility Master and Managed Network levels
  D. At the controller levels
  C. At both the Mobility Master and Managed Network levels

• Question 149:

  Where would an administrator define the split-tunneling mode for a RAP located at a branch office?

  A. the Firewall policy on the RAP
  B. the AAA policy on the controller
  C. the Firewall policy on the controller
  D. the VAP profile on the controller
  D. the VAP profile on the controller

• Question 150:

  A guest establishes an authenticated wireless session to an Aruba Mobility Controller (MC). The controller uses a ClearPass server for all AAA functions.

  Which AAA component disconnects the user when the guest exceeds their allowed duration?

  A. RADIUS Change of Authorization
  B. Active Directory Session Limits
  C. RADIUS Authorization Profile
  D. SNMP Disconnect
  A. RADIUS Change of Authorization