HPE6-A71 Questions & Answers

• Question 1:

  An administrator supports Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM) in a noncluster deployment. The administrator performs these tasks on the MM for the MCs:

  Enables L3 IP mobility for the respective VAPs on the MCs Creates a L3 domain and places the MCs in the domain

  However, roaming does not work when users roam from an AP connected to one controller in the domain to an AP connected to a different controller in the domain.

  What must the administrator do to fix this problem?

  A. Configure the same VLANs on the Mobility Controllers in the L3 domain.

  B. Re-provision the APs associated with the Mobility Controllers.

  C. Enable L3 IP Mobility globally on the Mobility Controllers.

  D. Create a home-agent-to-foreign-agent mapping table.

  Correct Answer: D

• Question 2:

  Which device can terminate to a cluster of Aruba Mobility Controllers (MCs) that run ArubaOS.8.x?

  A. BLE Beacon

  B. Mobility Master

  C. Mesh Point

  D. RAP

  Correct Answer: D

• Question 3:

  Which license type must an administrator purchase to use Spectrum Monitoring?

  A. RFP

  B. VMC

  C. PEFV

  D. PEFNG

  Correct Answer: A

• Question 4:

  Refer to the exhibit.

  

  Once connected to a WLAN, a user cannot reliably access resources in a company's network. Based on the output shown in the exhibit, what can be determined about the user's connection?

  A. The user has successfully authenticated through use of PEAP.

  B. The user is connected to a controller through use of the VIA client.

  C. The user is connected wirelessly to a controller.

  D. The user is connected to an ArubaOS-Switch.

  Correct Answer: D

• Question 5:

  Refer to the exhibit.

  

  An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the

  exhibit.

  -Zone A has six controllers that form a cluster.

  -Zone B has three controllers that from a cluster.

  -Zones C, D, and E have a single standalone controller each.

  A total of 13 VAPs are created across the five zones. A zone needs to accept RAP connections form

  branch offices. All zones have the same AP Group name. One of the zones will not accept connections

  from the MultiZone APs.

  Which could be a cause of this problem?

  A. RAPs are used in the configuration.

  B. The number of zones exceeds the maximum limit of four zones.

  C. AP Group names are different for each zone.

  D. The number of VAPs exceeds the maximum limit of 12 VAPs.

  Correct Answer: A

• Question 6:

  An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company's WLAN?

  A. AirMatch

  B. Clustering

  C. ARM

  D. Zones

  Correct Answer: C

• Question 7:

  An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user's session if machine authentication fails, but the 802.1X user authentication passes for a user who connects?

  A. 802.1X default user role

  B. Machine authentication initial user role

  C. 802.1X initial user role

  D. Machine authentication default user role

  Correct Answer: D

• Question 8:

  An administrator manages an AirWave Management Platform (AMP). The AMP server receives many SNMP traps from managed devices, but no alerts are generated on the AMP for certain critical traps.

  Which rule should the administrator create to cause the AMP server to generate an alert based on receipt of a critical SNMP trap from an Aruba Mobility Controller (MC)?

  A. AMON rule

  B. SNMP trap rule

  C. Trigger rule

  D. Alert rule

  Correct Answer: C

• Question 9:

  An administrator deploys Aruba Mobility Controller 7005s to a company's branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers.

  Which controller command should the administrator use to implement this policy?

  A. no console enable

  B. no mgmt-user console

  C. mgmt-user console-block

  D. console disable

  Correct Answer: C

• Question 10:

  Which Aruba Mobility Controller (MC) command should an administrator execute to determine whether an ArubaOS-Switch successfully registers to an MC?

  A. show port-access clients

  B. show crypto ipsec sa

  C. show tunneled-node-server state

  D. show datapath tunnel

  Correct Answer: D