HP HPE6-A44 Online Practice Questions and Exam Preparation

HP HPE6-A44 Online Questions & Answers

• Question 21:

  An administrator manages an AirWave Management Platform (AMP). The AMP server receives many SNMP traps from managed devices, but no alerts are generated on the AMP for certain critical traps. Which rule should the administrator create to cause the AMP server to generate an alert based on receipt of a critical SNMP trap from an Aruba Mobility Controller (MC)?

  A. AMON rule
  B. SNMP trap rule
  C. Trigger rule
  D. Alert rule
  B. SNMP trap rule

• Question 22:

  Refer to the exhibit.

  

  An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the exhibit.

  -Zone A has six controllers that form a cluster.

  -Zone B has three controllers that from a cluster.

  -Zones C, D, and E have a single standalone controller each.

  A total of 13 VAPs are created across the five zones. A zone needs to accept RAP connections form branch offices. All zones have the same AP Group name. One of the zones will not accept connections from the MultiZone APs.

  Which could be a cause of this problem?

  A. RAPs are used in the configuration.
  B. The number of zones exceeds the maximum limit of four zones.
  C. AP Group names are different for each zone.
  D. The number of VAPs exceeds the maximum limit of 12 VAPs.
  D. The number of VAPs exceeds the maximum limit of 12 VAPs.

• Question 23:

  Refer to the exhibit.

  

  An administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine from the configuration?

  A. RAP terminated on a stand-alone controller.
  B. AP terminated on a non-cluster Mobility Controller.
  C. RAP terminated on a Mobility Master.
  D. AP terminated on a Mobility Controller in a cluster.
  D. AP terminated on a Mobility Controller in a cluster.

• Question 24:

  An administrator defines credentials in the Mobility Master> Configuration> System section to configure a Mobility Master (MM). The administrator then accesses AirWave and adds the MM in Monitor-Only mode. The administrator expects

  AirWave to automatically discover the Aruba Virtual Mobility Controllers (VMCs) also managed by the MM, but does not see these under APs/Devices> New section in AirWave.

  What should the administrator do to solve this problem?

  A. Enable Automatic Device Authorization for the Group the Mobility Master belongs to in AirWave.
  B. Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and then scan for the Virtual Mobility Controllers in AirWave.
  C. Define the AirWave communication parameters on the Virtual Mobility Controllers, and then scan for the Virtual Mobility Controllers in AirWave.
  D. Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and have AirWave repoll the Mobility Master.
  C. Define the AirWave communication parameters on the Virtual Mobility Controllers, and then scan for the Virtual Mobility Controllers in AirWave.

• Question 25:

  Refer to the exhibit.

  

  What is true about the configuration shown in the exhibit?

  A. This is an ArubaOS-Switch configured for per-user tunneled node.
  B. This is an ArubaOS controller configured for per-user tunneled node.
  C. This is an ArubaOS-Switch configured for per-port tunneled node.
  D. This is an ArubaOS controller configured for per-user tunneled node.
  C. This is an ArubaOS-Switch configured for per-port tunneled node.

• Question 26:

  An administrator wants to reduce downtime of the wireless network when controllers are upgraded. Which Aruba OS feature should the administrator implement to reduce the amount of downtime the Aps will experience at the time of the upgrade process?

  A. Centralized upgrades
  B. AP apboot mode bypass
  C. AP fast start
  D. AP image preload
  A. Centralized upgrades

• Question 27:

  Refer to the exhibit.

  

  An administrator configures a cluster with only the members shown in the exhibit. AP load balancing is enabled. There are no other cluster parameters configured. What occurs when a cluster member experiences a failure?

  A. High value sessions are synchronized.
  B. APs and clients are fully replicated.
  C. Connected users are de-authenticated
  D. APs reboot and rejoin the cluster.
  D. APs reboot and rejoin the cluster.

• Question 28:

  A company has a wireless network that contains a cluster of four Aruba 7030 Mobility Controllers (MC) managed by a Mobility Master (MM) located in the data center. The company has Aps deployed that are nearing the capacity of the

  cluster. The administrator wants to increase AP capacity.

  How can the administrator solve the problem?

  A. Add a new controller to the Mobility Master.
  B. Add a Virtual Mobility Controller to the existing cluster.
  C. Add a 7030 controller to the existing cluster.
  D. Add a 7220 controller to the existing cluster.
  B. Add a Virtual Mobility Controller to the existing cluster.

• Question 29:

  Which Aruba Mobility Controller (MC) administrative role should an administrator assign to a receptionist so that they can create and manage guest accounts?

  A. guest-provisioning
  B. receptionist
  C. guest-operator
  D. network-operations
  A. guest-provisioning

• Question 30:

  An Administrator supports a group of employees that connect to the corporate office using the VIA client. An Aruba Mobility Controller (MC), behind a corporate firewall, terminates the user's VPN sessions. The VPN sessions fail to establish

  because of the existing firewall rules.

  Which connections must the administrator allow on the firewall? (Choose three.)

  A. UDP 8202
  B. UDP 4500
  C. UDP 8211
  D. TCP 4443
  E. TCP 443
  F. UDP 500
  A. UDP 8202
  B. UDP 4500
  E. TCP 443