HP HPE6-A44 Online Practice Questions and Exam Preparation

HP HPE6-A44 Online Questions & Answers

• Question 41:

  Refer to the exhibit.

  

  An administrator configures a policy for an AP Group. Port 3 of a RAP is a trunk that connects to a switch at a branch office. VLAN 1 is untagged and VLANs 10 (for data) and 11 (for voice) are tagged. The administrator applies an ACL

  inbound on Port 3 of the RAP.

  How does this configuration affect traffic on Port 3?

  A. It filters traffic from VLAN 10 and 11, but allows traffic from VLAN1.
  B. It filters traffic form VLAN 1, but allows traffic from VLANs 10 and 11.
  C. It allows all traffic form VLANs 1, 10, and 11.
  D. It filters traffic from VLANs 1, 10, and 11.
  A. It filters traffic from VLAN 10 and 11, but allows traffic from VLAN1.

• Question 42:

  IEEE 802.11r relies on which technology to reduce re-authentication delays when clients roam between APs?

  A. Fast BSS Transition
  B. Temporal Key Integrity
  C. Robust Security Network
  D. Opportunistic Key Caching
  A. Fast BSS Transition

• Question 43:

  An administrator configures a network scan set in AirWare to scan a subnet to discover new switches. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access. However, SSH access fails and the administrator must manually configure the SSH credentials used for all of these devices.

  To prevent this problem in the future, what should the administrator complete prior to running the network scan?

  A. Define the SSH communication parameters under the Group's Manage section.
  B. Define a scan credentials set that includes the SSH communication parameters.
  C. Define the SSH communication parameters under the AP/Device's Manage section.
  D. Define the SSH communication parameters for the Default Credentials under Device Setup section.
  B. Define a scan credentials set that includes the SSH communication parameters.

• Question 44:

  An administrator wants to simulate network traffic and analyze results in an Aruba wireless network to test components such as WPA-2, DHCP, and other protocols. Which Aruba solution implements these functions?

  A. Clarity Live
  B. AirWave VisualRF
  C. AirWave RAPIDS
  D. Clarity Synthetic
  B. AirWave VisualRF

• Question 45:

  An administrator wants to implement a cluster of Aruba Mobility Controllers (MCs). Which guideline should be followed?

  A. Implement Virtual Mobility Controllers and Mobility Controllers in the cluster to provide scalability.
  B. Verify that all the controllers run the same release of software.
  C. Purchase a cluster license to enable clustering
  D. Implement High Availability (HA) AP Fast Failover for redundancy.
  B. Verify that all the controllers run the same release of software.

• Question 46:

  Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers (MCs)?

  A. Heuristics mode
  B. WMM mode
  C. ALG mode
  D. SDN-API mode
  B. WMM mode

• Question 47:

  An administrator uses a ClearPass server to perform user authentication and download the role configuration that should be applied to the user's session. The server is associated to an AAA profile of a VAP. However, when a user connects to the SSID of the VAP, they are assigned the default role.

  What must the administrator do to ensure that the role is downloaded and used?

  A. Enable download role for CPPM in the VAP's WLAN profile.
  B. Enable server derivation in the ClearPass' RADIUS configuration.
  C. Enable server derivation in the server group.
  D. Enable server derivation in the AAA Server Group.
  B. Enable server derivation in the ClearPass' RADIUS configuration.

• Question 48:

  An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user's session if machine authentication passes, but the 802.1X user authentication fails for a user who connects?

  A. 802.1X default user role
  B. Machine authentication default machine role
  C. 802.1X initial user role
  D. Machine authentication default user role
  D. Machine authentication default user role

• Question 49:

  Refer to the exhibits.

  Exhibit 1: WLAN VAP configuration

  

  Exhibit 2: Microsoft NPS server configuration

  

  Exhibit 3: Server group configuration for the VAP.

  

  An employee authenticates with the username employee and the correct password. However, once the user authenticates, an administrator notices that the employee is assigned the authenticated role and not the desired employee role. What should the administrator do to solve this problem?

  A. Add a new server group rule on the controller.
  B. Associate the user to the employee group in Microsoft NPS.
  C. Change the server group name on the controller.
  D. Reference the employee role in the WLAN VAP on the controller.
  D. Reference the employee role in the WLAN VAP on the controller.

• Question 50:

  Refer to the exhibit.

  

  Controllers are configured in a cluster as shown in the exhibit. These are the network details.

  -A Mobility Master (MM) managers the cluster.

  -The cluster contains two controllers: C1 and C2.

  -AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).

  -AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.

  User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

  A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
  B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
  C. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
  D. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
  B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.