HP HPE2-Z40 Online Practice Questions and Exam Preparation

HP HPE2-Z40 Online Questions & Answers

• Question 1:

  Which solution provides firmware update automation for Aruba APs and switches?

  A. Aruba CIearPass
  B. Aruba Virtual Switching Framework (VSF)
  C. Aruba Activate
  D. Aruba AirWave
  A. Aruba CIearPass

• Question 2:

  Refer to the exhibit.

  

  The exhibit shows the physical connection between two Aruba 5400R switches and a server The network administrator is concerned about redundancy and wants to implement a solution like that shown on the right side of the exhibit. The

  administrator plans to use an LACP link aggregation with both links active.

  What must the administrator do first?

  A. Configure an LACP link aggregation between the switches.
  B. Enable dynamic link aggregation globally on the switches.
  C. Combine the switches into a Virtual Switching Framework (VSF) fabric.
  D. Configure the same operational key on both the switches.
  B. Enable dynamic link aggregation globally on the switches.

• Question 3:

  What is one requirement to combine Aruba 5400R z|2 Series switches in a Virtual Switching Framework (VSF) fabric?

  A. Both ofthe members must have two management modules.
  B. The switches must operate in v3-module only mode; any modules of an earlier version are automatically disabled.
  C. The interfaces assigned to the VSF link must be pre-configured as part of a link aggregation.
  D. One of the switches must be an Aruba 5412R switch, while the other member can be any switch in the 5400R series.
  D. One of the switches must be an Aruba 5412R switch, while the other member can be any switch in the 5400R series.

• Question 4:

  A network administrator configures LLDP-MAD on an Aruba Virtual Switching Framework (VSF) fabric The administrator needs to enter an SNMP community string after v2c in this command: Swich(config)# vsf Ildp-mad ipv4 10.1.0.2 v2c

  Which SNMP community string should the administrator enter?

  A. one configured for the VSF fabric on AirWave.
  B. one configured on the device at 10.1.0.2.
  C. one configured on the standby member in the fabric.
  D. one configured on the VSF fabric as a whole.
  C. one configured on the standby member in the fabric.

• Question 5:

  A network administrator wants to form a cluster with several Aruba Instant APs (|APs). What must the administrator verify?

  A. that all APs are pre-configured with WLANs with the same SSID
  B. that all APs are operating on the same radio channel
  C. that all APs are the same model
  D. that all APs are connected in the same subnet
  A. that all APs are pre-configured with WLANs with the same SSID

• Question 6:

  What is a benefit of HPE Network Optimizer in an Aruba network?

  A. It enables network devices to automatically prioritize Microsoft Skype for Business traffic flows.
  B. It enables network administrators to detect wired and wireless denial of service (DoS) attacks.
  C. It enables APs to distribute clients to the optimal AP for each client connection.
  D. It enables device profile deployment for Lyne Hard Phones.
  A. It enables network devices to automatically prioritize Microsoft Skype for Business traffic flows.

• Question 7:

  A company wants to deploy Aruba Instant APs (|APs) at branch offices and have a configuration automatically deployed to the APs. How can network administrators achieve this goal?

  A. Set up an Aruba Activate account and upload configuration templates and provisioning rules to it.
  B. Set up configuration templates on AirWave and Aruba Activate provisioning rules that direct the Aps to AirWave.
  C. Configure Aruba CIearPass to discover the APs and push configurations to them.
  D. Upload a configuration template on a management station and then connect that station to the Instant SSID.
  C. Configure Aruba CIearPass to discover the APs and push configurations to them.

• Question 8:

  A company needs a modular switch that can be combined with another modular switch into a single logical fabric. Which ArubaOS switch series meets these criteria?

  A. Aruba 2930F Series
  B. Aruba 3800 Series
  C. Aruba 3810 Series
  D. Aruba 5400R Series
  D. Aruba 5400R Series

• Question 9:

  A company wants all wireless users who connect to a WLAN to authenticate with an individual username and password. The company also wants to control which wireless devices are allowed to connect to the WLAN. Which security option on Aruba APs meets these criteria?

  A. WPA/WPA2 Personal and IVIAC authentication
  B. WPA/WPA2 Enterprise and IVIAC authentication with the IVIAC authentication fail-thru option
  C. Open and IVIAC authentication with a closed SSID
  D. WPA/WPA2 Enterprise and IVIAC authentication before 802.IX option
  A. WPA/WPA2 Personal and IVIAC authentication

• Question 10:

  A network administrator wants to apply a critical PoE priority to any ArubaOS switch port that connects to an Aruba AP. The priority should be applied dynamically based on LLDP messages received from the AP. Which step should the administrator take to meet this goal?

  A. Configure the PoE usage setting on all ports as //dp.
  B. Configure the PoE usage setting on all ports as class and make sure that Aruba APs are defined as Class 4 devices.
  C. Enable the default AP profile bound to the Aruba AP device type.
  D. Enable LLDP IVIED TLV extensions on the switch port.
  C. Enable the default AP profile bound to the Aruba AP device type.