HP HPE2-Z39 Online Practice Questions and Exam Preparation

HP HPE2-Z39 Online Questions & Answers

• Question 51:

  A company has a cluster of Aruba Instant APs (lAPs). The company wants to add a new IAP to the cluster. What should network administrators ensure before they connect the new IAP?

  A. that the new IAP has been provisioned with an IP address and the IP address of the cluster virtual controller (VC)
  B. that the switch port for the AP is untagged for the same VLAN as the current cluster
  C. that Aruba Activate is configured with provisioning rules for the IAP
  D. that the DHCP server has the correct options 60 and 43
  A. that the new IAP has been provisioned with an IP address and the IP address of the cluster virtual controller (VC)

• Question 52:

  A network administrator enters this command on an ArubaOS switch:

  Switch(config) # trunk 1,2 trk1

  What is required for the switch to combine both interfaces in a link aggregation?

  A. that the interfaces are up
  B. that the interfaces are aggregated while in a shutdown state
  C. that the interfaces are up and connect to interfaces that support active mode LACP
  D. that the interfaces are up and have LACP enabled on them
  B. that the interfaces are aggregated while in a shutdown state

• Question 53:

  

  Switch-1 and Switch -2 have the Virtual Switching Framework (VSF) settings shown in the exhibits. The administrator then connects the switches together on the interfaces in the VSF link. The administrator first enables VSF on Switch-1 and confirms the reboot. After Switch-1 reboots, the administrator enables VSF on Switch-2 and confirms the reboot.

  What happens?

  A. Switch-1 and Switch-2 form a VSF fabric, and Switch-1 becomes the commander.
  B. Switch-1 and Switch-2 fail to form a VSF fabric, and al interfaces on both switches remain up.
  C. Switch-1 and Switch-2 form a VSF fabric, and all interfaces on Switch-1 are disabled.
  D. Switch-1 and Switch-2 form a VSF fabric, and Switch-2 becomes the commander.
  C. Switch-1 and Switch-2 form a VSF fabric, and all interfaces on Switch-1 are disabled.

• Question 54:

  

  After the administrator enters this command, packets arrive that are destined for 10.1.8.8 and 10.1.8 13 What does the switch do with this traffic?

  A. It forwards all of the traffic to 10.1.101.1.
  B. It load balances some of the traffic 10.1.101.1 and some to 10.1.104.2.
  C. It forwards all of the traffic to 10.1.104.2.
  D. It drops the traffic.
  D. It drops the traffic.

• Question 55:

  A network administrator configures LLDP-MAD on an Aruba Virtual Switching Framework(VSF) fabric. The administrator needs to enter an SNMP community string after v2c in this command:

  Switch:(config) # vat lldp-rnad ipv4 10.1.0.2 v2c ---------------Which SNMP community string should the administrator enter?

  A. one configured on the device at 10.1.0.2
  B. one configured for the VSF fabric on AirWave
  C. one configured on the VSF fabric as a whole
  D. one configured on the standby member in the fabric
  D. one configured on the standby member in the fabric

• Question 56:

  

  This ArubaOS switch receives traffic without a VLAN tag on a switch port 1. The traffic is destined to a MAC address learned on port 2. What does the switch do with the traffic?

  A. It forwards the traffic on port 2 without a VLAN tag.
  B. It floods the traffic on port 2 on all VLANs.
  C. It drops the traffic.
  D. It forwards the traffic on port 2 with a VLAN tag of 5.
  C. It drops the traffic.

• Question 57:

  Network administrators need to access an ArubaOS switch CLI remotely. How can the administrator ensure that all data passed between management stations and the switch is encrypted?

  A. Create local user accounts and enable command authorization.
  B. Configure operator and manager passwords for Telnet access.
  C. Create an SSH key. enable SSH. and disable Telnet.
  D. Enable HTTPS access.
  D. Enable HTTPS access.

• Question 58:

  What is one characteristic of a spanning tree edge port on an ArubaOS switch?

  A. It ignores incoming BPDUs.
  B. It stays in Designated role during topology changes.
  C. It only forwards traffic in VLANs assigned to the instance 0 (1ST).
  D. It connects to a switch that runs MSTP but in a different region.
  B. It stays in Designated role during topology changes.

• Question 59:

  The switches in the exhibit use RSTP. The network administrator needs to add Link 2.

  Exhibit Missing

  Why should the administrator configure Links 1 and 2 as a link aggregation?

  A. to share traffic more evenly over both links
  B. to prevent a loop from occurring
  C. to automatically apply the settings already configured for Link 1 to Link 2
  D. 4th option Missing
  A. to share traffic more evenly over both links

• Question 60:

  A network has ArubaOS switches and an Aruba Instant cluster with IP addresses on 10.1.255.0/24 The network administrator wants to manage the devices in Aruba AirWave. The administrator uses the SNMP credentials configured on the switches to create a scan set for 10.1.255.0/24. The scan discovers the switches but not the Instant cluster.

  What should the administrator do to discover the cluster in AirWave?

  A. Re-configure the scan set to use the Aruba Instant default SNMPv3 user admin
  B. Configure SNMP credentials in the Instant Ul.
  C. Specify the AirWave IP address in the Instant Ul System > Admin settings.
  D. Install the Instant cluster self-signed certificate on AirWave.
  B. Configure SNMP credentials in the Instant Ul.