HP HPE0-V14 Online Practice Questions and Exam Preparation

HP HPE0-V14 Online Questions & Answers

• Question 241:

  A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The customer runs a large Oracle database. They need to increase performance and reduce their licensing costs. Which feature of HPE Gen10 servers offers these benefits?

  A. workload profile matching
  B. agentless management
  C. jitter smoothing
  D. core boosting
  D. core boosting

• Question 242:

  You are installing a HPE MSA storage system and need to connect the power cooling module (PCM). What should you do to ensure power redundancy?

  A. Ensure that a physical service processor is properly connected to each PCM
  B. Verify that each cooling fan is cabled to a separate controller
  C. Connect each PCM within a shelf to a different power distribution unit (PDU)
  D. Connect redundant power cords from the PCM controller to independent power supplies
  C. Connect each PCM within a shelf to a different power distribution unit (PDU)

• Question 243:

  Refer to the exhibit.

  

  When performing a code upgrade on an HPE Nimble array, you noticed a connection failure on ESX1. Refer to the exhibit showing the complete zoning configuration of one of the HPE SN3000B switches. What should you do to ensure storage access is not interrupted when doing the next update?

  A. Create and ISL between the two HPE SN3000B switches.
  B. Create a new zone for ESX1 and the second storage controller.
  C. Change the timeout values on the SN3000B switch.
  D. Configure the same zone on a second HPE SN3000B.
  B. Create a new zone for ESX1 and the second storage controller.

• Question 244:

  Which information is contained in the Array Diagnostic Report? (Choose two.)

  A. firmware version numbers
  B. device status
  C. file system types
  D. partition types
  E. operating system mount points
  A. firmware version numbers
  B. device status

• Question 245:

  Which hardware and software components make up a Nimble dHCI infrastructure?

  A. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and VMware
  B. Aruba Switches, HPE Synergy, HPE Nimble, and VMware
  C. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and Hyper-V
  D. Aruba Switches, HPE Synergy, HPE Nimble, and Hyper-V
  A. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and VMware

• Question 246:

  A customer has a VMware environment with HPE ProLiant servers and Nimble storage. They have been using a Windows VM to provide file services for their employees.

  The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.

  What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?

  A. HPE StoreEver 30750
  B. HPE Storage Performance File Controller
  C. HPE StoreEasy 1460 Storage
  D. HPE StoreEasy 1650 Expanded Storage
  B. HPE Storage Performance File Controller

• Question 247:

  DRAG DROP

  Match the characteristic to the correct HPE ProLiant family.

  Select and Place:

  

  

  ---

  Reference: https://www.hpe.com/uk/en/product-catalog/servers/proliant-servers/pip.specifications.hpe-proliant-dl380-gen10-server.1010026818.html

• Question 248:

  While troubleshooting a HPE ProLiant Gen10 rack-mount server, you determine that the current and backup system ROMs are corrupt.

  What should be the next step to fix the server?

  A. Restore the system firmware from a USB drive
  B. Restore the system firmware from a UEFI shell prompt
  C. Replace the CMOS battery
  D. Restore the system firmware from the iLO repository
  E. Replace the system board
  E. Replace the system board

• Question 249:

  A customer is planning to deploy a branch office server rack. The environment will have the following requirements:

  1.

  Single rack with 20 HPE ProLiant DL360 Gen10 Servers.

  2.

  Each Server will have 6 x 10G SFP+ Ports.

  3.

  Each Server will have a dedicated iLO port.

  4.

  The customer requires that only two switches be used.

  5.

  The customer requires separate control planes. Which switch configuration can meet these requirements?

  A. 2 HPE 5945 Series switch with IRF
  B. 2 Aruba 8325 Series switches with VSX
  C. 2 HPE 5945 Series switches standalone
  D. 2 Aruba 8325 Series switches with backplane stacking.
  C. 2 HPE 5945 Series switches standalone

• Question 250:

  You are discussing storage types with a customer that is configuring their NAS solution. The company's application developers use user-generated media and image files. For which type of data should this customer use file storage?

  A. Mass storage
  B. Microsoft Exchange database
  C. Server boot volumes
  D. VDI applications
  A. Mass storage