HP HPE0-V14 Online Practice Questions and Exam Preparation

HP HPE0-V14 Online Questions & Answers

• Question 171:

  A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.

  They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.

  Which architecture meets the customer requirements?

  A. One VSX stack of two Aruba 8320 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch 10 SFP+ to SFP+ DACs in each switch Two QSFP+ to Quad SFP+ adapters
  B. One IRF stack of wo HPE 5945 2-Slot switches each with the following: One 24-Port SFP28 + 2-Port QSFP28 module One 24-Port 1/10GBASE-T + 2-Port QSFP+ module 10 SFP+ to SFP+ DACs in each switch
  C. One IRF stack of two HPE 5945 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch 10 SFP+ to SFP+ DACs in each switch
  D. One VSX stack of two Aruba 8325 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch 10 SFP+ to SFP+ DACs in each switch
  C. One IRF stack of two HPE 5945 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch 10 SFP+ to SFP+ DACs in each switch

• Question 172:

  You are creating a logical array on an HPE ProLiant server. The customer asks you to use drives with different capacities in a single array. What should you explain to this customer?

  A. Using drives with different capacities in a single array increases the chance of disk failure
  B. The extra capacity of the larger drives will not be utilized
  C. The process to create the array will fail, and the server will not boot
  D. The RAID level will be set at RAID 0 automatically
  B. The extra capacity of the larger drives will not be utilized

• Question 173:

  A customer needs to locate an exact time when a link down event occurred at the FC port of Nimble storage Which on-premises tool can the customer use?

  A. Embedded UEFI Diagnostics
  B. HPE Nimble Storage web-based user interface
  C. HPE StoreServ Management Console
  D. HPE InfoSight
  D. HPE InfoSight

• Question 174:

  You have completed a non-disruptive activation of firmware on an SN6000 switch. Which session must be restarted manually?

  A. Enterprise Fabric Management Suite session
  B. telnet session
  C. SAN connection Manager session
  D. QuickTools session
  B. telnet session

• Question 175:

  When configuring a single ProLiant Gen10 server, which embedded tool can be used to deploy a reliable and consistent configuration?

  A. HPE iLO Amplifier Pack
  B. HPE OneView
  C. Smart Update Manager
  D. Intelligent Provisioning
  D. Intelligent Provisioning

• Question 176:

  You are installing new drives into the internal cage of a HPE ProLiant DL380 server. How is the drive device number set?

  A. The Smart Array controller assigns the device number automatically based on the bay
  B. HPE OneView uses the server profile to assign the device number
  C. The operating system assigns the device number automatically based on the drive installation order
  D. You must use Smart Storage Administrator to assign the device number
  A. The Smart Array controller assigns the device number automatically based on the bay

• Question 177:

  Which HPE MSA storage feature enables tuning the tier-migration algorithm for a virtual volume when creating or modifying the volume?

  A. Automated Tiered Storage
  B. Volume Tier Affinity
  C. Wide Striping
  D. HDD drive geometry
  A. Automated Tiered Storage

• Question 178:

  A customer wants an HPE solution to expand a Big Data platform. The company is outgrowing its current setup and expects to consume 1 PB of data in a few months and up to 2 PB of data within a year. Which HPE server platform is best suited for this use case?

  A. HPE Microserver
  B. HPE Edgeline
  C. HPE Apollo
  D. HPE Proliant ML
  C. HPE Apollo

• Question 179:

  A customer needs a solution that supports rapid provisioning changes on physical bare-metal servers and on a virtualization hypervisor. They are considering migrating to a new solution that supports software-defined storage. Which HPE compute platform should the customer implement?

  A. ProLiant DL
  B. BladeSystem
  C. Synergy
  D. SimpliVity
  C. Synergy

• Question 180:

  Refer to the exhibit.

  

  You are asked to review a server configuration for a customer before it is quoted. The server will be used in a business-critical environment and high availability is required. The server configuration is shown in the exhibit. What should be added to the configuration to ensure availability?

  A. HPE Smart Array P408i-a SR Gen10 12 G SAS Modular Controller
  B. HPE DL380 Gen10 Intel Xeon-Gold 6143 (2.8 GHz/16-core/205 W) Processor Kit
  C. HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit D. HPE DL38X Gen10 12 Gb SAS Expander Card Kit
  C. HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit D. HPE DL38X Gen10 12 Gb SAS Expander Card Kit