HP HPE0-S56 Online Practice Questions and Exam Preparation

HP HPE0-S56 Online Questions & Answers

• Question 1:

  You need to install 10 HPE ProLiant servers in an environment without DHCP. Which tool can you use to set up remote management?

  A. Intelligent Provisioning
  B. UEFI System Utilities
  C. Intelligent Management Center
  D. iLO 5 Configuration Utility
  C. Intelligent Management Center

• Question 2:

  A customer requires a software-defined storage solution. Which storage solution meets the customer's needs?

  A. HPE MSA
  B. HPE StoreVirtual VSA
  C. HPE 3PAR StoreServ
  D. HPE Nimble Storage
  B. HPE StoreVirtual VSA

• Question 3:

  You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack. How should you install the PDUs to maximize power distribution and space efficiency?

  A. at the top of the rack with the cables running between the RETMA rails
  B. horizontally on extension bars mounted directly to the frame for improved clearance
  C. in the bottom bay of the rack with the outlets facing the front
  D. vertically, side by side on both sides of the rack with the outlets facing the center
  D. vertically, side by side on both sides of the rack with the outlets facing the center

• Question 4:

  A customer is planning an upgrade to their network infrastructure. They want to move to an open networking solution, and they want to install a network switch that supports their choice of network operating system. Which HPE product family will meet the customer's needs?

  A. Altoline
  B. FlexFabric
  C. Arista
  D. Aruba
  A. Altoline

• Question 5:

  What can you do when installing an HPE switch to provide protection from electrostatic discharge?

  A. Install the switch in a rack with rubber insulators.
  B. Use a power surge protector.
  C. Load balance the power supplies.
  D. Connect the switch grounding cable correctly.
  D. Connect the switch grounding cable correctly.

• Question 6:

  A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability. Which HPE server family meets the customer's needs?

  A. ProLiant ML
  B. ProLiant DL
  C. ProLiant BL
  D. ProLiant MicroServer
  A. ProLiant ML

• Question 7:

  What should you install with a server for a customer who may need to perform maintenance on the server while it is the rack? (Select two.)

  A. Cable Management Arm (CMA)
  B. redundant PDUs
  C. high performance fan kit
  D. rack stabilization kit
  E. blanking panels
  A. Cable Management Arm (CMA)
  D. rack stabilization kit

• Question 8:

  A customer needs to connect two switches without VLANs or Spanning Tree. To which mode should the switches be set?

  A. Routing Mode
  B. Bridge Mode
  C. Switch Mode
  D. Gateway Mode
  D. Gateway Mode

• Question 9:

  You are troubleshooting HPE ProLiant servers for a customer. The customer has granted you read-only access to HPE OneView. You need to download the audit log from OneView. Which permission level should the customer give you?

  A. Network administrator
  B. Infrastructure administrator
  C. Backup administrator
  D. Server administrator
  D. Server administrator

• Question 10:

  A customer requires a high level of network bandwidth and reliability. You are installing a pair of HPE switches that can provide redundancy with multiple connections between them for high availability and faster throughput. Which technology should you configure on the switches to enable the capability the customer requires?

  A. Rapid Spanning Tree Protocol (RSTP)
  B. Virtual Extensible Local Area Network (VxLAN)
  C. Multichassis Link Aggregation (MLAG)
  D. Multiple Spanning Tree Protocol (MSTP)
  C. Multichassis Link Aggregation (MLAG)