HP HPE0-J80 Online Practice Questions and Exam Preparation

HP HPE0-J80 Online Questions & Answers

• Question 1:

  What happens during the fabric login (FLOGI) during the Fibre Channel registration process? (Select two.)

  A. Service parameters are exchanged
  B. Buffer-to-buffer credits are initiated
  C. E_Port FCIDs are assigned
  D. F_Port error counters are cleared
  E. Connections between N-Ports are established
  A. Service parameters are exchanged
  E. Connections between N-Ports are established

• Question 2:

  You size a Remote Copy solution for an HPE StoreServ customer. Which best practice should be implemented concerning Virtual Volumes (VVs)?

  A. All VVs should be put into their own Remote Copy group BAll VVS belonging to the same application should be added to the same Remote Copy group
  B. All VVs belonging to the same application should be added to the same Remote Copy group
  C. All VVs should be spread evenly across all available Remote Copy groups
  D. All VVs belonging to the same application should be added to different Remote Copy groups
  B. All VVs belonging to the same application should be added to the same Remote Copy group

• Question 3:

  A storage architect is reviewing customer as-built documentation. The solution architect discovers that there are Windows Server 2003 machines that will be virtualized in an ESXi 5.5 environment connected to an HPE 3 PAR StoreServ.

  What should be considered in the MPIO implementation design?

  A. The HPE 3PAR array will handle load balancing on the hardware level
  B. HPE 3PAR Multipath I/O should be used for Microsoft Windows 2003
  C. MPIO will be handled natively by the ESXi host software
  D. MPIO must be set to use MRU
  B. HPE 3PAR Multipath I/O should be used for Microsoft Windows 2003

• Question 4:

  Which functionalities or use cases are included in all HPE Converged Storage offerings for software-defined data centers? (Select three.)

  A. Platforms that provide key elements of programmatic control of the SDDC infrastructure
  B. HPE StoreVirtual VSA, HPE 3PAR StoreServ, and HPE StoreOnce VSA
  C. Solutions that provide robust solutions, remote site protection, and simple enterprise- class choice for VDI
  D. Converged Storage appliances that include the HPE Apollo and HPE Moonshot platforms
  E. Platforms that support data center control that is entirely automated by software, providing the ability for applications to request infrastructure resources
  F. Storage platforms designed to support virtualization growth at all stages of the expected data and performance needs over the life of the implementation
  B. HPE StoreVirtual VSA, HPE 3PAR StoreServ, and HPE StoreOnce VSA
  D. Converged Storage appliances that include the HPE Apollo and HPE Moonshot platforms
  E. Platforms that support data center control that is entirely automated by software, providing the ability for applications to request infrastructure resources

• Question 5:

  Which technology allows HPE to maximize available capacity utilization of SSD drives?

  A. HPE 3PAR Global Sparing
  B. HPE 3PAR Adaptive Sparing
  C. HPE 3PAR Adaptive Optimization
  D. HPE 3PAR Distributed Sparing
  C. HPE 3PAR Adaptive Optimization

• Question 6:

  A storage architect is reviewing customer as-built documentation and a proposed design for an HPE 3PAR StoreServ deployment. The array must be installed in a co-location facility in facility-supplied-and-managed racks. The storage architect has determined that service clearances and power are adequate. The proposed design is storage-centric and will require two racks to accommodate all the disk enclosures.

  What should the storage architect consider when validating the design?

  A. The correct number of SAS Active Optical Cables (AOC) are included.
  B. The correct number of InfiniBand cables are included.
  C. Expansion is only supported in HPE racks.
  D. The correct number of Fiber Channel Cables are required
  A. The correct number of SAS Active Optical Cables (AOC) are included.

• Question 7:

  Which information should be collected and analyzed when discovering customer expectations for replication performance? (Select two.)

  A. rate of data change
  B. bandwidth
  C. type of data
  D. latency
  E. frequency of copies
  A. rate of data change
  D. latency

• Question 8:

  You are working with a junior storage administrator to document an existing SAN implementation. You must determine if an HPE 3PAR StoreServ 7000 is cabled correctly. The admin only has the 3parcust credentials.

  How can you verify that the array is correctly cabled?

  A. Check the Storage Systems section in HPE OneView.
  B. Execute a Checkhealth through SPOCC.
  C. Use the HPE SAN Visibility tool.
  D. Use HPE 3PAR StoreServ Management Console (SSMC) with read-only rights.
  B. Execute a Checkhealth through SPOCC.

• Question 9:

  You are demonstrating management of HPE 3PAR StoreServ arrays using HPE OneView. When you attempt to add an array, you cannot attach to it. What must you do to resolve this problem?

  A. Reboot the HPE 3PAR StoreServ nodes, one at a time.
  B. Restart the RESTful Application Program Interface (REST API).
  C. Reboot the HPE OneView appliance.
  D. Restart the Web Services Application Program Interface (WSAPI).
  D. Restart the Web Services Application Program Interface (WSAPI).

• Question 10:

  You design and size an HPE StoreVirtual solution for an SMB customer environment according to these requirements. -High availability between two data centers is needed -3 TB of data should be replicated -21 Gb/s links are needed between Sites A and B -A round trip time of 1.8 ms is needed between Sites A and B -A third site, Site C, is needed for Failover Manager (FOM) connected with 100 MB/s. There is a latency of 55 ms between Site C and the other sites. Which potential issue should be discussed with the customer before proposing the HPE StoreVirtual solution?

  A. Maximum latency requirements are not met for Site C.
  B. Minimum bandwidth requirements between Sites C and B are not met.
  C. Minimum round trip time for Sites A and B is not met.
  D. Minimum bandwidth requirements for Site C are not met.
  D. Minimum bandwidth requirements for Site C are not met.