HPE0-J58 Exam Details

  • Exam Code
    :HPE0-J58
  • Exam Name
    :Designing Multi-Site HPE Storage Solutions
  • Certification
    :HP Certifications
  • Vendor
    :HP
  • Total Questions
    :60 Q&As
  • Last Updated
    :Jul 11, 2026

HP HPE0-J58 Online Questions & Answers

  • Question 1:

    You have chosen to utilize HPE 3PAR synchronous replication in order to meet the customer stated requirement of RPO=0. What is a key consideration you need to explain to the customer?

    A. Host write latencies will decrease
    B. Host write latencies will increase
    C. Host writes can be committed to either primary or backup storage before host acknowledgment
    D. RC sync can only be deployed over FC links

  • Question 2:

    A customer needs a data recovery solution for their HPE 3PAR array. They have the following requirements: RPO needs to be within three hours RTO needs to be within three hours There is no need for offsite data archive They will have a limited maintenance window

    Which solution meets all of the customer needs?

    A. HPE 3PAR StoreServ with RMC
    B. HPE StoreOnce
    C. HPE StoreAll
    D. HPE StoreEver

  • Question 3:

    A customer needs a new replication solution that makes use of capacity efficiency technologies, even though data is being replicated to another array. You have been developing a solution that includes two HPE 3PAR arrays. What should you emphasize in your proposal?

    A. The arrays share deduplication hash tables, and the target array only needs to compress the replicated data from the source array
    B. Compression technologies increase the effective bandwidth being available for replication and disaster recovery
    C. Thin Technologies, deduplication, and compression can be used on both sides with volumes in Remote Copy groups
    D. The data being replicated will travel the connection between the arrays fully compressed and deduplicated

  • Question 4:

    A customer needs to setup specific replication bandwidth requirements to limit the bandwidth between HPE Nimble Storage replication partners, which is different than the bandwidth requirements to another Replication Partner. Which Bandwidth parameter should the customer use?

    A. Array-to-array Limit
    B. Per-partner limit
    C. Partner Maximum limit
    D. Overall limit policy

  • Question 5:

    A customer has three 4-node HPE 3PAR arrays. Two of the arrays are deployed at a primary site, and the third array is deployed at a disaster recovery site. Both arrays at the primary site are replicated to the single array at the disaster

    recovery site.

    All replication is asynchronous periodic. All arrays are utilizing 4 RCIP links for replication.

    The customer needs to add a third array at the primary site. They would like to use the existing array at the disaster recovery site as a replication target for this additional array.

    What must the architect consider to meet this customer requirement?

    A. A single pair of RCIP ports on one array can have a Remote Copy relationship with up to two other arrays
    B. Remote Copy fan-in ratios of greater than 2:1 are only supported with RCIP when using 10 Gb Ethernet links
    C. Arrays involved in a Remote Copy relationship must have the same number of node pairs
    D. Asynchronous streaming replication must be used for Remote Copy fan-in ratios greater than 2:1

  • Question 6:

    Which advantage is provided by HPE 3PAR Remote Copy across all replication modes?

    A. support of all Remote Copy topologies
    B. automatic recovery of array failure independent of Remote copy topology
    C. Remote Copy support up to 100ms latency over all transport layers
    D. all Remote Copy topologies yield identical RPO and RTO

  • Question 7:

    A customer has recently acquired another company that is located less than 3 km from their current main location. Both locations use HPE B-Series products in their storage environment. The customer needs to merge the 2 locations together

    while still using the current WAN and networking infrastructure at both locations. They need to keep their initial cost down until they are able to redesign both networking infrastructures.

    Which protocol should be incorporated when providing a proposal to meet the customer needs?

    A. ISCSI
    B. CWDM
    C. DWDM
    D. FCIP

  • Question 8:

    A customer needs to upgrade their existing HPE 3PAR environment. They ask you to present a solution to gather data from all 200 of their HPE 3PARs arrays, which are spread across the globe. The arrays consist of various generations and OS levels, and they are managed by regional instances of SSMC. What should you present to the customer as a solution?

    A. using an HPE 3PAR CLI script with the checkupgrade command
    B. using a script based on the HPE 3PAR Web Services API
    C. using the upgrade report tool in HPE InfoSight
    D. using the SSMC array configuration reports

  • Question 9:

    A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence. What should you recommend to the customer?

    A. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
    B. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
    C. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
    D. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs

  • Question 10:

    A customer needs to a multi-site environment where the entire inter-site transmission will be encrypted. Which products support this feature without additional licenses? (Select two.)

    A. HPE 3PAR
    B. HPE StoreOnce VSA
    C. HPE Nimble arrays with SmartReplicate (remote replication)
    D. any B-series 16Gb SAN Switch
    E. HPE StoreOnce hardware appliance

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only HP exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your HPE0-J58 exam preparations and HP certification application, do not hesitate to visit our Vcedump.com to find your solutions here.