HP HPE0-J50 Online Practice Questions and Exam Preparation

HP HPE0-J50 Online Questions & Answers

• Question 1:

  When installing an HPE StoreOnce multimode system, which licenses must be available on all couplets to do Catalyst stores and to be allowed to do Catalyst replication?

  A. Catalyst required for the first couplet
  B. Catalyst and Replication licenses on the first couplet
  C. Catalyst licenses on all couplets
  D. Replication license on all couplets
  D. Replication license on all couplets

• Question 2:

  Refer to the exhibit.

  

  A customer is complaining about slow performance for their HPE 3PAR StoreServ system.

  Which CLI command can be used by the storage administrator to display the queue length of a VLUN attached to the server during the troubleshooting process?

  A. perfvluns
  B. statvirtvolmapping
  C. show mappingsvirtvol
  D. srstatvlun
  D. srstatvlun

• Question 3:

  Your customer needs to extend their storage SAN environment without the additional workload of manually creating zones for every new host or storage device. What will allow the customer to move from creating zones manually to having zones created automatically?

  A. Brocade scripting of the zone setup
  B. HPE 3PAR Smart SAN feature
  C. break up of SAN switches to zone individually
  D. HPE SAN Advisor
  C. break up of SAN switches to zone individually

• Question 4:

  A storage integrator is handing over an installed HPE StoreOnce solution to the customer and demonstrates that the system is property configured. Which CLI command can be used to run an appliance self-test?

  A. run confidencereport
  B. run confidencereport all
  C. system confidencechecker runtest all
  D. confidencecheck
  C. system confidencechecker runtest all

• Question 5:

  After installing the HPE StoreOnce VSA into the VM environment, where can the version number of the software be checked?

  A. in the install log file
  B. on the console login screen
  C. in the install messages
  D. on the VMware vCenter
  A. in the install log file

• Question 6:

  A customer has requested the storage integrator to assist in installation of a HPE 3PAR StoreServ 8200.

  As a best practice, what should be taken into consideration when deploying 3PAR Virtual Service Processor?

  A. Microsoft Hyper-V version of Virtual Service processor needs to be deployed to a CSV volume.
  B. Installation of the Virtual Service processor is optional with a single two node HPE 3PAR StoreServ.
  C. The Virtual Service processor should be deployed on other volume than a volume from the managed HPE 3PAR StoreServ.
  D. Virtual Service processor for VMware vSphere should be installed using VMware Fault Tolerance.
  A. Microsoft Hyper-V version of Virtual Service processor needs to be deployed to a CSV volume.

• Question 7:

  A storage integrator is implementing an HPE 3PAR StoreServ system and connecting several storage volumes to a customer's VMware farm. During the implementation, the customer reveals that their legacy backup solution for protecting virtual machines does not provide a satisfactory RTO (recovery time objective). A recent implementation of new StoreOnce appliances did not fully solve the problem.

  Which HPE solution could the integrator demonstrate to address the customers RTO concerns?

  A. HPE 3PAR StoreServ Management Console
  B. HPE Complete iTernity iCAS
  C. HPE 3PAR Integrated Management Console
  D. HPE Recovery Manager Central for VMware
  D. HPE Recovery Manager Central for VMware

• Question 8:

  The storage integrator is about to add new HPE 3PAR StoreServ 8200 to a customer's existing SAN infrastructure. What must be taken into account when developing a technical action plan?

  A. customer change control procedures
  B. action plan audience
  C. environmental requirements
  D. level of support
  C. environmental requirements

• Question 9:

  What does DWPD (drive writes per day) for an SSD indicate?

  A. the maximum number of 4K host writes to the entire drive capacity of the SSD per day over a three-year period
  B. the maximum number of erase operations to the entire drive capacity of the SSD per day over a three-year period
  C. the maximum number of 4K host writes to the entire drive capacity of the SSD per day over a five-year period
  D. the maximum number of drive rewrite cycles (erase and write) for the SSD over a five-year period
  C. the maximum number of 4K host writes to the entire drive capacity of the SSD per day over a five-year period

• Question 10:

  A customer has 10 different branch offices. Each branch has one MSA 1040 and a StoreOnce 3100. The customer has concerns regarding the actual and predictive failures on sites which don't have any IT staff. Which HPE tool should the integrator implement to provide visibility and alerts for the end customer and HPE?

  A. HPE STATS
  B. HPE OneView
  C. HPE Insight Support Online
  D. HPE Insight Remote Support
  D. HPE Insight Remote Support