HP HP Certifications HP2-Z37 Questions & Answers

• Question 71:

  Which HP solution provides network optimization and automated network provisioning to its customers?

  A. Intelligent Management Center NTA

  B. FlexNetwork Architecture

  C. Intelligent Resilient Framework

  D. Software-defined Networking

  Correct Answer: D

• Question 72:

  A network administrator adds a new VLAN in a campus network, VI.AN 120. The administrator needs to set up a DHCP scope for this VLAN. The scope will include an IP address for DHCP clients and a default gateway address. An HP Comware aggregation layer switch acts as a DHCP server for this VLANs at the access layer. The administrator configures this on the Comware switch for the new DHCP scope:

  

  Based on this configuration, what else must the administrator configure to make the pool available to DHCP clients that send requests in VLAN 120?

  A. dhcp vlan 120

  B. dhcp server ip pool 120vlan 120

  C. dhcp enable

  D. dhcp server vlan 120

  Correct Answer: C

• Question 73:

  A network administrator establishes an aggregated link between an HP Comware and ProVision switch. VLAN 1 is untagged and VLANs 2 and 3 are tagged. The administrator configures these commands on the Comware switch:

  

  The administrator configures theses commands on the ProVision switch:

  

  Some of the links in the aggregated link become blocked.

  Which Comware configuration should the administrator apply to the Comware switch to resolve this issue?

  A. interface bridge-aggregation 1link-aggregation mode dynamic

  B. interface bridge-aggregation 1link-aggregation type lacp dynamic

  C. interface bridge-aggregation 1link-aggregation mode static

  D. interface bridge-aggregation 1link-mode type lacp

  Correct Answer: A

• Question 74:

  Which statement is true about the default configuration on an HP ProVision switch?

  A. Spanning tree is disabled.

  B. LACP is used when a BAGG interface is created.

  C. IRF is enabled.

  D. RSTP is the default spanning tree mode.

  Correct Answer: A

• Question 75:

  An HP ProVision switch is operating at its factory default settings. A network administrator connects the switch to a VLAN with a DHCP server. The switch-to-switch connection is carrying untagged traffic. The administrator wants to log in to the switch CLI using Telnet.

  How should the administrator contact the switch and log in?

  A. Contact the switch at its DHCP-assigned IP address and log in with the default password hp.

  B. Contact the switch at its default IP address 192.168.1.1/24 and log in without entering a password.

  C. Contact the switch at its DHCP-assigned IP address and log in without entering a password.

  D. Contact the switch at its default IP address 192.168.1.1/24 and log in with the default password hp.

  Correct Answer: B

• Question 76:

  Which security benefit does SNMPv3 offer that SNMPv2 does not offer?

  A. Data integrity

  B. SSL encryption

  C. RADIUS groups

  D. Scopes

  Correct Answer: A

• Question 77:

  What is the maximum number of active links supported between a device and HP ProVision switches when distributed trunking is used to connect the device to the ProVision switches?

  A. Two

  B. Four

  C. Six

  D. Eight

  Correct Answer: A

• Question 78:

  A network administrator configures several HP Comware switches to be part of a single Intelligent Resilient Framework (IRF) virtual device. What is correct about the domain and member IDs in this configuration?

  A. The switches have different domain IDs and different member IDs.

  B. The switches have the same domain ID and the same member ID.

  C. The switches have the same domain ID and different member IDs.

  D. The switches have different domain IDs and the same member ID.

  Correct Answer: C

• Question 79:

  How does Open Shortest Path First (OSPF) help enterprises meet their high availability requirements, compared to RIP?

  A. OSPF is usually easier to troubleshoot if problems occur

  B. OSPF has a resilient, non-hierarchical design

  C. OSPF provides faster convergence.

  D. OSPF uses less CPU during routing updates

  Correct Answer: C

• Question 80:

  Which ProVision configuration includes 10.0.3.0/24, which represents VLAN 30 in OSPF area 0?

  A. vlan 30 ip ospf area 0

  B. vlan 30 area 0

  C. interface vlan 30 ip ospf area 0

  D. router ospf area 0 vlan 30

  Correct Answer: A