HP HP2-Z33 Online Practice Questions and Exam Preparation

HP HP2-Z33 Online Questions & Answers

• Question 11:

  Which factors impact the calculation of the Effective Isotropic Radiated Power (EIRP)?

  A. antenna gain, cable loss, and transmit power
  B. propagation loss, receiver sensitivity, and transmit power
  C. antenna height, interference, and receiver signal strength
  D. antenna gain, propagation loss, and transmit power
  A. antenna gain, cable loss, and transmit power

• Question 12:

  Refer to the exhibit.

  

  Based on the access controller configuration shown in the exhibit, when can newly discovered access points (AP) join this AC?

  A. An AP can automatically join if the controller recognizes the AP serial number
  B. An AP can automatically join if the controller recognizes the AP IP subnet address
  C. An AP can automatically join if the controller recognizes the AP name
  D. An AP can automatically join if the controller recognizes the AP model type
  D. An AP can automatically join if the controller recognizes the AP model type

• Question 13:

  Which statement is correct about security on a wireless network?

  A. 802.1X with EAP-TLS mode provides encryption without authentication.
  B. In MAC authentication, the MAC address can be spoofed.
  C. 802.1X with PEAP MSCHAPV2 provides authentication without encryption.
  D. MAC authentication provides encryption.
  B. In MAC authentication, the MAC address can be spoofed.

• Question 14:

  In an HP BYOD solution, which settings are required in order to allow guest users to access the BYOD registration page? (Select two.)

  A. User Access Manager Access Condition on the VLAN group that selects the GUEST VLAN
  B. User Access Manager Access Policy that defines user authentication
  C. User Access Manager Access Policy that returns Onboarding VLAN
  D. Portal free rule that enables DNS to be forwarded from onboarding VLAN interface to DNS server
  E. Portal server commands that block HTTP traffic from being forwarded
  D. Portal free rule that enables DNS to be forwarded from onboarding VLAN interface to DNS server
  E. Portal server commands that block HTTP traffic from being forwarded

• Question 15:

  When is a User Access Manager certificate required?

  A. in 802.1X mode during EAP authentication process
  B. in PAP authentication
  C. with a WPA/WPA2 preshared-key
  D. in MAC authentication
  A. in 802.1X mode during EAP authentication process

• Question 16:

  Refer to the exhibit.

  

  A client can roam successfully between AP1 and AP2. However, the client is unable to roam between AP2 and AP3. What could be the problem?

  A. The client is not using RSN+802.1X authentication mode.
  B. The AP2 and AP3 are not in the same mobility group.
  C. The network is using IPv6.
  D. The IACTP service has been disabled on AC1.
  D. The IACTP service has been disabled on AC1.

• Question 17:

  In an HP BYOD solution, what does DHCP fingerprinting provide?

  A. endpoint information
  B. web browser type
  C. SSID of the connection
  D. user account information
  A. endpoint information

• Question 18:

  A network administrator has been receiving complaints about dropped voice calls. The administrator looks at the client's information on the access controller. The administrator sees that the clients experiencing dropped voice calls have a roaming status of Normal. The administrator also sees that the clients not experiencing dropped voice calls have a roaming status of Fast Roaming.

  What could cause two clients to have different naming statuses?

  A. Fast roaming cannot be used for clients using WPA2 and 802.1X
  B. Fast roaming cannot be used when the client is on the edge of cell coverage
  C. Fast roaming cannot be used for clients using WPA and 802.1X
  D. Fast roaming cannot be used for clients using PEAP/MS-CHAPv2
  C. Fast roaming cannot be used for clients using WPA and 802.1X

• Question 19:

  Refer to the exhibit.

  

  An engineer is installing a new access point (AP). The AP has successfully acquired an IP address. The engineer can ping the access controller (AC) from the AP. However the AC is not discovering the AP. What could cause this problem?

  A. The interface between the AC and the IP network is down.
  B. The AC and AP must be in the same subnetwork.
  C. The AP and AC are not in the same VLAN.
  D. The DHCP server has not been set up with option 43.
  D. The DHCP server has not been set up with option 43.

• Question 20:

  What are the process steps that occur for a guest to access a wireless network managed with an HP BYOD solution? (Place the steps in the correct order.)

  Hot Area: