HP HP2-Z32 Online Practice Questions and Exam Preparation

HP HP2-Z32 Online Questions & Answers

• Question 71:

  Common settings (such as the IP address) for all ports on an MSM access point are represented by a port name. What is this port called?

  A. Common
  B. Global
  C. Switch
  D. Bridge
  D. Bridge

• Question 72:

  A company wants to use MSM765 zl Controllers in a team solution that supports 750 MSM APs. What must the company purchase for this solution?

  A. Six MSM765 zJ Controllers
  B. Five MSM765 zl Controllers and an additional Premium license for each one
  C. Four MSM765 zl Controllers and an additional Premium license for each one
  D. Four MSU765 zl Controllers
  B. Five MSM765 zl Controllers and an additional Premium license for each one

• Question 73:

  What is the primary difference between AES-CCMP and TKIP?

  A. With AES-CCMP, each station generates its PMK as part of the 802.1X authentication process.
  B. With TKIP, the station uses the same key to secure data and the MIC.
  C. AES-CCMP uses a 254-bit key stream, while TKIP uses a 128-bit key stream.
  D. AES-CCMP uses a stronger encryption algorithm than that provided by TKIP.
  D. AES-CCMP uses a stronger encryption algorithm than that provided by TKIP.

• Question 74:

  What is a proper use for an ingress VLAN in an HP MSM VSC?

  A. To specify the VLAN on which APs forward traffic from clients connected to the VSC
  B. To enable controlled MSM APs to tunnel wireless guest traffic successfully
  C. To map traffic from wired guest clients to an access-controlled VSC
  D. To specify the VLAN on which the controller forwards traffic from clients connected to the VSC
  A. To specify the VLAN on which APs forward traffic from clients connected to the VSC

• Question 75:

  A hospital requires a wireless solution for visitors. The network administration wants to prevent guests from accessing the Internet until they agree to a legal policy and log in on a Web page supported by the controller. Which file should the network administrator provide to the web designer to customize for this purpose?

  A. subscribe.asp
  B. index asp
  C. public-ip.asp
  D. welcome.asp
  B. index asp

• Question 76:

  A company wants to increase its security by adding its security by adding a wireless intrusion detection system/intrusion prevention system (IDS/IPS), which could detect rogue APs and Wi- Fi Protected Access (WPA) attacks. Which product would provide this extra layer of security?

  A. HP Threat management Services z1 Module
  B. HP RF Manager
  C. HP TippingPoint IPS Platform
  D. HP Intelligent management Center (IMC) with Endpoint Admission Defense (EAD)
  B. HP RF Manager

• Question 77:

  What should match on HP MSM Controllers in order for the team to form properly?

  

  

• Question 78:

  A company needs a WLAN for its employees Network administrators are planning a non-access- controlled VSC that enforces WPA2 and 802.1x. The network administrators want to assign wireless clients to VLAN 10 in building 1 and to VLAN 20 in building 2.

  What is the proper design?

  A. Two VSCs each or which specifies a different egress VLAN
  B. One VSC that specifies two egress VLANs
  C. Two VSCs each of which specifies a different ingress VLAN
  D. One VSC that is bound to two AP groups using different egress VLANs
  D. One VSC that is bound to two AP groups using different egress VLANs

• Question 79:

  A network administrator configures most settings for an HP MSM team from the team Web browser interface. However, the network administrator must configure a few settings from the interface of the individual member. What is one of these settings?

  A. Certificates
  B. Subscripting plans
  C. DHCP relay settings
  D. Virtual service communities (VSCs)
  C. DHCP relay settings

• Question 80:

  A network administrator maps a network profile with aVLAN ID 512 to the LAN port of an HP MSM765zl Mobility Controller The network administrator configures an IP interface for this profile and intends to contact and manage the controller

  on this interface.

  All other settings remain at default.

  What is one step that the network administrator must complete before connecting to the controller on its new IP address?

  A. Set the untagged LAN port network interface IP address to none.
  B. Enable Spanning Tree Protocol (STP) on the interface.
  C. Select the new IP interface as an active interface in the Controller 籑anagement>; Management tool window
  D. Set the IP interface as the authorized egress VLAN in the default VSC.
  D. Set the IP interface as the authorized egress VLAN in the default VSC.