HP HP2-Z32 Online Practice Questions and Exam Preparation

HP HP2-Z32 Online Questions & Answers

• Question 51:

  Refer to the exhibit.

  

  A network administrator enables 802.1X authentication on a VSC. The HP MSM Controller implements the RADIUS server settings shown in the exhibit. Which devices require certificates?

  

  

• Question 52:

  Select the appropriate answer below drop.

  

  

• Question 53:

  Which 802.11 frames can be sent at any supported rate (as opposed to the basic rate)?

  A. Broadcast frames
  B. Management frames
  C. Multicast frames
  D. Unicast frames
  D. Unicast frames

• Question 54:

  What is one factor that a wireless network designer must consider when estimating path loss between an AP and a client?

  A. The antenna gain
  B. The transmit power of the AP
  C. The client receiver sensitivity
  D. The type of environmental obstruction
  D. The type of environmental obstruction

• Question 55:

  Refer to the exhibit.

  

  A company must deploy APs at multiple branch sites, as well as at a main site, and selects HP MSM APs for this purpose. A centralized HP MSM Controller must manage the APs. The exhibit shows the VLANs and addressing for a few of the branches as examples. What is a guideline for deploying the APs and ensuring that they can contact the controller?

  A. The company should only use the DHCP option for discovery if the network DHCP server does not already use option 43 to configure devices such as Voice over IP (VoIP) phones.
  B. Because APs are deployed across a Layer 3 boundary from the MSM Controller, they must be pre- provisioned with static IP addresses.
  C. The company should create a DHCP scope that includes DHCP option 43. the IP address of the controller, and the vendor code equal to 1.
  D. The company should configure the controller to assign IP addresses to the APs.
  C. The company should create a DHCP scope that includes DHCP option 43. the IP address of the controller, and the vendor code equal to 1.

• Question 56:

  Refer to the exhibit.

  

  A network administrator needs to configure a local mesh between the three APs shown in the exhibit. The network administrator configured AP1 for the master role. What are valid roles for AP 2 and AP 3?

  A. 2 = Alternate Master; 3 - Slave
  B. 2 = Slave; 3 = Alternate Master
  C. 2 = Slave; 3 = Master
  D. 2 = Slave; 3 = Slave
  C. 2 = Slave; 3 = Master

• Question 57:

  A company has an MSM765 zl Controller that is managing more than one hundred APs. To increase redundancy, the company is adding another MSM765 zl Controller, which will form a team with the first. The controller currently supports an access-controlled VSC for guests. It assigns IP addresses to guest clients, directs the clients to its local web pages, and authenticates the guests to a local user account. Which aspect of this solution should the network administrator change in order implement teaming?

  A. Controllers should use non-access-controlled VSCs with the guest login pages.
  B. Controllers should now direct guests to pages on an external web server.
  C. Controllers should use DHCP relay instead of assigning IP addresses to clients.
  D. Controllers should now authenticate guests to an external RADIUS server.
  A. Controllers should use non-access-controlled VSCs with the guest login pages.

• Question 58:

  A company has an MSM solution that includes an MSM 760 Controller and MSM APs. The VSC for the employees does not use the controller for access control, nor does it use wireless mobility. Employees' wireless clients should be assigned to VLAN 10. How should the Ethernet network administrators design VLAN 10?

  A. Extend VLAN 10 from its default router to the MSM Controller's LAN port.
  B. Extend VLAN 10 from its default router to the APs' switch ports
  C. Extend VLAN 10 from the MSM Controller's LAN port to the APs' switch ports.
  D. Extend VLAN 10 from its default router to the MSM Controller's Internet port.
  C. Extend VLAN 10 from the MSM Controller's LAN port to the APs' switch ports.

• Question 59:

  APs. What could occur if AP 2 fails?

  

  A. AP 1 establishes a session with AP 3.
  B. AP 1 establishes a session with AP 4.
  C. AP 4 establishes a session with AP 5.
  D. AP 4 establishes a session with AP 3.
  D. AP 4 establishes a session with AP 3.

• Question 60:

  Which VSCs require the implementation of opportunistic key caching?

  A. Any VSCs that is secured by WPA/WPA2 with 802.1X
  B. All VSCs that are secured by WPA/WPA2-PSK or WPA/WPA2 with 802.1X
  C. Any VSC that supports Layer 3 roaming
  D. All access-controlled VSCs
  B. All VSCs that are secured by WPA/WPA2-PSK or WPA/WPA2 with 802.1X