HP HP2-Z32 Online Practice Questions and Exam Preparation

HP HP2-Z32 Online Questions & Answers

• Question 41:

  A company has an HP MSM solution. The HP MSM APs deployed at one site are managed by HP MSM Controller. The HP MSM Controller is deployed at another site. The APs tunnel client data traffic to the controller. Which guideline should the network administrator follow to ensure the solution works correctly?

  A. No firewall between the APs and the controller can implement NAT.
  B. Because the tunnel cannot be established on a tagged VLAN, the egress network in the VSC binding of the APs must not be configured.
  C. Any firewall between the APs and the controller must permit traffic destined to the controller on UDP ports 3000 and 3001.
  D. The tunnels must terminate on the controller's IP address in its untagged LAN port interface Get Latest and or for an MSM720 its Access network.
  B. Because the tunnel cannot be established on a tagged VLAN, the egress network in the VSC binding of the APs must not be configured.

• Question 42:

  An MSM network administrator creates an access-controlled VSC and enables DHCP services on this VSC. The network administrator sets the DHCP subnet in the guideline should the administrator follow?

  A. Use the 192.168.1.0/24 subnet as the teaming subnet if a team is required.
  B. Use the controller's IP address on 192.168.1.0/24 subnet as its management address.
  C. Assign the 192.168.1.0/24 subnet to the controller's LAN port (untagged).
  D. Do not set the 192.168.1.0/24 subnet on any IP interface on the controller.
  B. Use the controller's IP address on 192.168.1.0/24 subnet as its management address.

• Question 43:

  What distinguishes HP MSM APs that implement a dynamic mesh link from HP MSM APs that implement a static link?

  A. The APs using the dynamic link can automatically negotiate the VLAN for egressing user traffic.
  B. The APs using the dynamic link can establish new links between each other if one of the APs fails.
  C. The APs using the dynamic link can authenticate each other with 802.1X and receive the key for encrypting traffic sent on the link in that way.
  D. The APs using the dynamic link can negotiate type of encryption that they will use dynamically.
  B. The APs using the dynamic link can establish new links between each other if one of the APs fails.

• Question 44:

  Match each description to the appropriate extensible authentication protocol (EAP) type.

  

  

• Question 45:

  Refer to the exhibit.

  

  A hospital has an HP MSM solution that provides guest access, including Web-Auth to the local login pages of the controller. The exhibit shows the Hospital VSC used by guests. The network administrators have created an isolated guest VLAN, VLAN 100. The HP MSM Controller should provide the same guest services to wired clients connected to this VLAN. The network administrator has configured a network profile and the required settings. How should the controller apply the profile in the VSC?

  A. As the egress VLAN for unauthenticated users
  B. As the egress VLAN for authenticated users
  C. As the ingress VLAN
  D. As the egress VLAN for intercepted users
  A. As the egress VLAN for unauthenticated users

• Question 46:

  The 802.11n radio in one AP supports three spatial streams. The 802.11n radio in another AP supports two spatial streams.

  What is one benefit of the first AP radio over the second AP radio?

  A. Each spatial stream carries a separate stream of data, increasing bandwidth.
  B. Each spatial stream operates on a slightly different frequency, increasing reliability and resilience to interference.
  C. Each spatial stream carries the same stream of data, increasing reliability.
  D. Each spatial stream can be directed toward a different client, increasing the bandwidth for more clients.
  B. Each spatial stream operates on a slightly different frequency, increasing reliability and resilience to interference.

• Question 47:

  HP MSM APs support a VSC that specifies 54 Mbps as the highest supported data rate. Several clients connect to the WLAN associated with this VSC. What is the throughput and bandwidth that the clients experience?

  A. All clients connected to an AP radio share a throughput of less than 54 Mbps, but a client can transmit or receive at 54 Mbps.
  B. When multiple clients connect to an AP radio, each of those clients is limited to 54 Mbps.
  C. All clients connected to the VSC share a total of 54 Mbps of throughput regardless of how many AP radios support the VSC.
  D. When multiple clients connect to an AP radio, each client typically receives about 50 Mbps throughput.
  B. When multiple clients connect to an AP radio, each of those clients is limited to 54 Mbps.

• Question 48:

  Refer to the exhibit.

  

  Portion of the settings for VSC profile A VSC profile B and VSC profile C. A network administrator is deploying an HP MSM solution for a hotel. The solution consists of an HP MSM760 Access Controller, 50 HP MSM317 Access Devices, and several HP SMS460 Aps. The hotel plans to connect voice over IP (VoIP) phones to port 1 on each HP MSM317. To protect the ports from unauthorized access, the network administrator will configure the ports to support MAC authentication to accounts configured on the controller. The exhibit shows a portion of the settings for three VSCs Each VSC is enabled for MAC authentication.

  How can the network administrator configure port 1 on the MSM317s to meet this requirement?

  A. Configure switch port 1 at the controlled Aps level and bind VSC A to it.
  B. Configure switch port 1 at the controlled Aps level and bind VSC B to it.
  C. Configure switch port 1 at the controlled Aps level and bind VSC C to it.
  D. Configure switch port 1 at the controlled Aps level and enable MAC authentication on it.
  B. Configure switch port 1 at the controlled Aps level and bind VSC B to it.

• Question 49:

  Refer to the exhibit.

  

  A hospital requires a wireless solution for guests. To enable wireless access, the network administrator creates an access-controlled VSC that uses HTML-based user logins (Web- Auth). The exhibit shows the topology.

  Which guideline should the network administrator follow to create the VSC for this solution1?

  A. Do not use the default VSC because the LAN port is disconnected.
  B. Use the controller for authentication but not for access control. Enable local HTML-user login,
  C. Enable the DHCP server or DHCP relay on the VSC.
  D. Enable wireless security filters or the Always tunnel client traffic setting. Do not enable both.
  B. Use the controller for authentication but not for access control. Enable local HTML-user login,

• Question 50:

  Which standard supports channel bonding?

  A. 802.11g
  B. 802.11n
  C. 802.11a
  D. 802.11b
  B. 802.11n