HP HP2-T26 Online Practice Questions and Exam Preparation

HP HP2-T26 Online Questions & Answers

• Question 81:

  Which components are integrated into the HP Service Pack for ProLiant? (Select three.)

  A. HP Smart Update Firmware DVD
  B. HP Advanced Configuration Utility
  C. HP ProLiant Version Control DVD
  D. HP ProLiant Support Packs
  E. HP Smart Update Manager
  F. HP Advanced Diagnostic Utility
  D. HP ProLiant Support Packs
  E. HP Smart Update Manager
  F. HP Advanced Diagnostic Utility

• Question 82:

  Where is ProLiant BladeSystem repair information stored and used for future reference?

  A. Integrated Management Log
  B. Survey
  C. Content Management System
  D. System Management Homepage
  A. Integrated Management Log

• Question 83:

  The administrator password for the Onboard Administrator (OA) module has been lost. How does the system administrator recover this password? (Select three.)

  A. select the factory reset option during reboot
  B. press and hold the OA reset button for 5 seconds
  C. connect the computer with terminal emulator to the serial port of the active OA
  D. remove the OA module, close the reset jumper for 5 seconds, reseat the module
  E. boot the system into Lost Password mode
  F. connect to the OA via SSH using the service IP address
  B. press and hold the OA reset button for 5 seconds
  C. connect the computer with terminal emulator to the serial port of the active OA
  E. boot the system into Lost Password mode

• Question 84:

  When pairing an SB40c Storage Blade with an BL680c G6, in which mezzanine card slot will the Mezzanine Pass-Thru card be installed?

  A. 1
  B. 2
  C. 3
  D. 4
  C. 3

• Question 85:

  The Onboard Administrator in an HP BladeSystem enclosure detects an error condition and the enclosure UID is on. Which color does the Insight Display illuminate?

  A. amber
  B. flashing amber
  C. flashing blue
  D. blue
  D. blue

• Question 86:

  As an administrator, you are required to update the firmware for BladeSystem products. You have determined that the VC firmware is later than 1.34 and that the servers within the blade chassis already have an OS loaded on them. What is the recommended order to update the BladeSystem products?

  A. OA, server blades (online/offline), then VC
  B. server blades (online/offline). VC then OA
  C. VC, OA, then server blades (online/offline)
  D. You cannot do this; the VC firmware needs to be installed first.
  A. OA, server blades (online/offline), then VC

• Question 87:

  When connected to the c7000 or c3000 enclosure service port how does a Windows-based laptop configured for DHCP acquire its IP address?

  A. The laptop will receive an address in the 192.168.x.x address range from the DHCP server within the enclosure.
  B. The laptop will receive an address in the 169.254.x.x address range from the DHCP server within the enclosure.
  C. The laptop will timeout waiting for a DHCP server to respond and will assign itself an address in the 169.254.x.x address range.
  D. The laptop will timeout waiting for a DHCP server to respond and must have an address manually assigned in the same subnet as the enclosure.
  A. The laptop will receive an address in the 192.168.x.x address range from the DHCP server within the enclosure.

• Question 88:

  Which tool can be used to update system board firmware on a server blade?

  A. RBSU
  B. iLO
  C. ORCA
  D. HP SUM
  B. iLO

• Question 89:

  You installed an FC HBA in mezzanine slot 2 of a BL460c G6 in a c7000 enclosure. In which interconnect bays should the FC interconnect be installed?

  A. 1 and 2
  B. 3 and 4
  C. 5 and 6
  D. 7 and 8
  C. 5 and 6

• Question 90:

  You have a c7000 enclosure with 1 GB Pass-Thru modules. You cannot get to the network from any of the blades. What should you verify first for proper connectivity to the network?

  A. external switch set to half duplex
  B. interconnect link between the Pass-Thru modules
  C. external switch supports Gigabit speed
  D. correct SFPs are installed
  C. external switch supports Gigabit speed