HP HP2-T26 Online Practice Questions and Exam Preparation

HP HP2-T26 Online Questions & Answers

• Question 61:

  Which command can be used to display the currently installed EFi on a BL870c Server Blade?

  A. romdrivers
  B. ver
  C. info
  D. bcfg
  C. info

• Question 62:

  What should you use to check the overall health status of all the BL460c Gen8 servers you recently installed in a c7000 enclosure?

  A. Power Manager
  B. Array Configuration Utility
  C. Onboard Administrator
  D. Insight Control Server Deployment
  C. Onboard Administrator

• Question 63:

  Disk drive technology used in RAID storage creates logical drives from physical units. With RAID 5, how many physical I/O requests are generated for each logical write?

  A. three writes and one read
  B. two reads and two writes
  C. one read and three writes
  D. four writes and one read
  B. two reads and two writes

• Question 64:

  A customer is experiencing drive encryption issues with a BL490c Server Blade running Microsoft Windows Server. The Trusted Platform Module (TPM) is suspected as the cause. What must be done to replace the TPM? (Select two.)

  A. The TPM must be cleared.
  B. BitLocker must be disabled.
  C. The TPM Visibility option must be set to hide so it is not visible to the OS.
  D. The TPM must be replaced, as it is a customer installable option.
  E. The TPM and system board must be replaced at the same time.
  B. BitLocker must be disabled.
  E. The TPM and system board must be replaced at the same time.

• Question 65:

  Which mezzanine card is compatible with the HP ProCurve 6120XG interconnect?

  A. HP NC326m PCIe Dual-Port 1Gb Server Adapter
  B. Emulex LPe1105-HP 4Gb Fibre Channel HBA
  C. HP 4X QDR IB CX-2 Dual Port Mezz HCA for HP BladeSystem c-Class
  D. HP StorageWorks 80GB IO Accelerator for BladeSystem c-Class
  A. HP NC326m PCIe Dual-Port 1Gb Server Adapter

• Question 66:

  You are doing troubleshooting and need to access a single server blade console. Which configuration option is the best to use?

  A. Connect an SUV to the KVM module.
  B. Enable the iLO Advanced license in RBSU.
  C. Enable graphics mezzanine support.
  D. Connect an SUV cable to the blade.
  D. Connect an SUV cable to the blade.

• Question 67:

  An engineer replaced a broken tape drive during business hours. What is the best method for testing this drive?

  A. Use LandTT to perform a device self test.
  B. Use LandTT to perform a device assessment test.
  C. Run online Insight Diagnostics and check the IE logs.
  D. Run offline Insight Diagnostics.
  A. Use LandTT to perform a device self test.

• Question 68:

  A server has been shutting down sporadically for the past two months. VCRM is not installed and configured. Where can you locate the latest versions of firmware that are available for this server?

  A. PSP DVD
  B. SmartStart
  C. HP website
  D. server image file from two months ago
  C. HP website

• Question 69:

  When the enclosure management address is not configured, which tool is used to check the Onboard Administrator (OA) Service IP?

  A. HP Systems Insight Manager
  B. OA Management Homepage
  C. Onboard Administrator CLI
  D. Insight Display
  D. Insight Display

• Question 70:

  What can be used to reboot the Active or Standby Onboard Administrator (OA) module?

  A. ASR implemented on the OA level
  B. enclosure link-down port
  C. enclosure Reset button at the rear of the enclosure
  D. Insight Display
  C. enclosure Reset button at the rear of the enclosure