HP HP2-T26 Online Practice Questions and Exam Preparation

HP HP2-T26 Online Questions & Answers

• Question 41:

  A rack with a c7000 is to be relocated to a remote location. What should be used when moving the rack to ensure no damage will occur to the enclosure?

  A. packaging foam
  B. shipping bracket
  C. stabilization kit
  D. ballast kit
  B. shipping bracket

• Question 42:

  A customer is installing a new drive in a BL460c Gen8. None of the LEDs on the drive are lit. What is a possible cause?

  A. The customer used a third party drive.
  B. Dynamic Power Saving disables LEDs.
  C. The backplane port is disabled in system ROM.
  D. There is no activity on the drive.
  D. There is no activity on the drive.

• Question 43:

  Which OA GUI virtual power button command powers the server on or off gracefully?

  A. momentary press
  B. reset
  C. press and hold
  D. restart
  E. reload
  A. momentary press

• Question 44:

  Refer to the exhibit below.

  

  As shown in the exhibit, four BL460c G6 Server Blades are installed in a c7000 enclosure. What is the maximum number of BL680 Server Blades that can be added to this enclosure without powering off any blade?

  A. 4
  B. 5
  C. 6
  D. 12
  D. 12

• Question 45:

  Place each deployment method next to its description.

  Select and Place:

  

  

• Question 46:

  Which tool can be used to deploy firmware and software updates to a ProLiant blade?

  A. HP Smart Update Manager
  B. HP System Management Homepage
  C. Service Pack for Proliant
  D. Insight Diagnostics
  C. Service Pack for Proliant

• Question 47:

  You want to connect to a ProLiant Server Blade that has the iLO port available. What must you do to connect a laptop for a direct connection to the Onboard Administrator?

  A. Connect a hub/switch between the laptop and the ProLiant Server Blade iLO port.
  B. Use a CAT 5 cross-over cable.
  C. Use a standard CAT 5 cable.
  D. Use a CAT 5e cable.
  C. Use a standard CAT 5 cable.

• Question 48:

  When you try and boot a previously installed operating system, a BL495c G6 Server Blade freezes. What is the first step you should take when troubleshooting this problem?

  A. Load and try to boot the latest SmartStart CD.
  B. Use iLO to access the Integrated Management Log (IML) of the failing server blade.
  C. Load and try to run the HP Insight Diagnostics Online Edition.
  D. Use iLO to access the enclosure Onboard Administrator.
  B. Use iLO to access the Integrated Management Log (IML) of the failing server blade.

• Question 49:

  Which mezzanine card allows Fibre Channel and Ethernet connectivity through the same interconnect module?

  A. Brocade 804 8Gb FC HBA for HP BladeSystem c-Class
  B. HP NC382m Dual Port 1GbE Multifunction BL-c Adapter
  C. HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
  D. HP NC553m 10Gb 2-port FlexFabric Adapter
  D. HP NC553m 10Gb 2-port FlexFabric Adapter

• Question 50:

  An administrator is struggling with the configuration of a c7000 enclosure and calls HP support for assistance. What is the best way to forward the inventory and event logs to HP support.

  A. Capture the screen shots of the c7000 enclosure settings through OA.
  B. Capture the integrated Management Log of all servers.
  C. Capture the configuration scripts through the Onboard Administrator.
  D. Capture the screen shots of insight Display.
  C. Capture the configuration scripts through the Onboard Administrator.